Willy-JL
ddca525b83
Add gps_nmea from https://github.com/xMasterX/all-the-plugins
|
пре 2 година | |
|---|---|---|
| .. | ||
| img | пре 2 година | |
| .gitsubtree | пре 2 година | |
| LICENSE | пре 2 година | |
| README.md | пре 2 година | |
| application.fam | пре 2 година | |
| constants.h | пре 2 година | |
| gps.c | пре 2 година | |
| gps_10px.png | пре 2 година | |
| gps_uart.c | пре 2 година | |
| gps_uart.h | пре 2 година | |
| minmea.c | пре 2 година | |
| minmea.h | пре 2 година | |
| ui.png | пре 2 година | |
| wiring.png | пре 2 година | |
README.md
GPS for Flipper Zero
A simple Flipper Zero application for NMEA 0183 serial GPS modules, such as the
- Adafruit Ultimate GPS Breakout.
Heavy lifting (NMEA parsing) provided by minmea.
Usage
This is a single-screen app, and a few interactions are provided via the hardware buttons:
- Long press the up button to change the baud rate. The default baud rate is 9600, but 19200, 38400, 57600, and 115200 baud are also supported.
- Long press the right button to change speed units from knots to kilometers per hour.
- Press the OK button to set the backlight to always on mode. Press it again to disable.
- Long press the back button to exit the app.
Hardware Setup
Connect the GPS module to power and the USART using GPIO pins 9 (3.3V), 11 (GND), 13 (TX), and 14 (RX), as appropriate.
See the tutorial video - https://www.youtube.com/watch?v=5vSGFzEBp-k from Lab401 by RocketGod - https://github.com/RocketGod-git for a visual guide to the hardware setup.
Confirmed Compatible Modules
- Adafruit Ultimate GPS Breakout
- Beitian BN-180
- Royaltek RBT-2100LP
- u-blox NEO-6M
If you have verified this application working with a module not listed here, please submit a PR adding it to the list.
Links
Original repo link - https://github.com/ezod/flipperzero-gps Adafruit Ultimate GPS Breakout: https://www.adafruit.com/product/746 minmea: https://github.com/kosma/minmea u-blox NEO-6M: https://www.u-blox.com/en/product/neo-6-series