Momentum-Apps/camera_suite/docs

Flipper Zero - Camera Suite

Software to run an ESP32-CAM module on your Flipper Zero device.

Full setup, wiring guide, etc. in the main project README here: https://github.com/CodyTolene/Flipper-Zero-Camera-Suite

Firmware is needed for the ESP32-CAM module, see here for more information: https://github.com/CodyTolene/Flipper-Zero-Camera-Suite#firmware-installation

Software Guide

Button mappings:

Up = Contrast Up

Down = Contrast Down

Left = Toggle invert.

Right = Toggle dithering on/off.

Center = Take a picture and save to the "DCIM" folder at the root of your SD card. Image will be saved as a bitmap file with a timestamp as the filename ("YYYYMMDD-HHMMSS.bmp"). If flash is on in the settings (enabled by default) the ESP32-CAM onboard LED will light up when the picture is taken.

Back = Go back.

Settings:

Orientation = Rotate the camera image 90 degrees counter-clockwise starting at zero by default (0, 90, 180, 270). This is useful if you have your camera module mounted in a different orientation than the default.

Flash Toggle the ESP32-CAM onboard LED on/off when taking a picture.

Dithering Type Change between the Cycle Floyd–Steinberg, Jarvis-Judice-Ninke, and Stucki dithering types.

Haptic FX = Toggle haptic feedback on/off.

Sound FX = Toggle sound effects on/off.

LED FX = Toggle LED effects on/off.