CO2_mini_old.txt 1.5 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283
  1. Info: CO2 sensor mini
  2. Address: C8C8CF
  3. Rate: 1
  4. Ch: 122
  5. CRC: 2
  6. DPL: 0
  7. RETR: 0x0F
  8. Resend: 3
  9. Delay_ms: 30
  10. ReadCmd repeat: 3
  11. Payload struct: 2,1,1
  12. EEPROM=0; RAM=1; PROGMEM=2; ID=3; RESET=4; WRAM=0x89
  13. R default: ,EEPROM,0xC1
  14. W default: n,,0x81
  15. Write start: 0,0,0x8F
  16. Listen: C8C8C1=CO2,Alarm,-
  17. R: ID*=,ID
  18. R: _CO2*2=0x6C,RAM,0xC2
  19. R: _PORTA=0x39,RAM
  20. W: _PORTA=,0x3B,WRAM
  21. R: _PORTB=0x36,RAM
  22. W: _PORTB=,0x38,WRAM
  23. R: _OSCCAL=0x51,RAM
  24. W: _OSCCAL=,0x51,WRAM
  25. R: OSCCAL_EMEM=0
  26. R: RxAddr=1#
  27. W: RxAddr=,1
  28. R: Ch=2
  29. W: Ch=,2
  30. R: nRF RETR=3#
  31. W: nRF RETR=,3
  32. R: Send period=4
  33. W: Send period=,4
  34. R: CO2 threshold*2=5,,0xC2
  35. W: CO2 threshold=,5,0x82
  36. R: CO2 correct*2=7,,0xC2
  37. W: CO2 correct*2=,7,0x82
  38. R: FanLSB[10]=i:9#
  39. W: FanLSB=,i:9
  40. R: Transmit pause=19
  41. W: Transmit pause=,19
  42. R: Flags=20#
  43. W: Flags=,20
  44. W: Reset=,RESET,0xC1
  45. R: _LED Warning=0x74,RAM
  46. W: _LED Warning=,0x74,WRAM
  47. S: LED=,0,0x40
  48. SBatch: LED On: LED=1
  49. SBatch: LED Off: LED=0
  50. RBatch: Settings: ID;RxAddr;Ch;Send period;CO2 threshold;CO2 correct;FanLSB;nRF RETR;Transmit pause;Flags
  51. WBatch: Default: RxAddr=0xCF;Ch=122;Send period=30;CO2 threshold=1000;CO2 correct=0;FanLSB={0xC1,0,0,0,0,0,0,0};nRF RETR=0x3;Transmit pause=1;Flags=0;Reset
  52. WBatch: CO2: CO2 threshold=1000;CO2 correct=0
  53. WBatch: Fan: FanLSB={0xC1,0,0,0,0,0,0,0,0,0};Reset
  54. WBatch: RETR: nRF RETR=0x2F;Reset
  55. WBatch: Transmit pause: Transmit pause=30
  56. WBatch: Flags: Flags=0x00
  57. WBatch: LED Warning: _LED Warning=0x30
  58. WBatch: PORTA: _PORTA=0x0C
  59. WBatch: PORTB: _PORTB=0xC
  60. WBatch: OSCCAL: _OSCCAL=128
  61. WBatch: Reset: Reset