Momentum-Apps/protocols/pvchat.c

#include "../app.h"

/* Copyright (C) 2022-2023 Salvatore Sanfilippo -- All Rights Reserved
 * See the LICENSE file for information about the license.
 *
 * ----------------------------------------------------------
 * ProtoView chat protocol. This is just a fun test protocol
 * that can be used between two Flippers in order to send
 * and receive text messages.
 * ----------------------------------------------------------
 *
 * Protocol description
 * ====================
 *
 * "1" represents a pulse of one-third bit time (100us)
 * "0" represents a gap of one-third bit time (100us)
 * 
 * The message starts with a preamble + a sync pattern:
 * 
 * preamble = 1010101010101010 x 3
 * sync     = 1100110011001100
 * 
 * The a variable amount of bytes follow, where each bit
 * is encoded in the following way:
 * 
 * zero 100 (100 us pulse, 200 us gap)
 * one  110 (200 us pulse, 100 us gap)
 * 
 * Bytes are sent MSB first, so receiving, in sequence, bits
 * 11100001, means byte E1.
 * 
 * This is the data format:
 * 
 * +--+------+-------+--+--+--+
 * |SL|Sender|Message|FF|AA|CS|
 * +--+------+-------+--+--+--+
 *  |    |      |
 *  |    |      \_ N bytes of message terminated by FF AA + 1 byte of checksum
 *  |    |      
 *  |    \_ SL bytes of sender name
 *  \
 *   \_ 1 byte of sender len, 8 bit unsigned integer.
 * 
 * 
 * Checksum = sum of bytes modulo 256, with checksum set
 *            to 0 for the computation.
 */

static bool decode(uint8_t *bits, uint32_t numbytes, uint32_t numbits, ProtoViewMsgInfo *info) {
    const char *sync_pattern = "1010101010101010" "1100110011001100";
    uint8_t sync_len = 32;

    /* This is a variable length message, however the minimum length
     * requires a sender len byte (of value zero) and the terminator
     * FF 00 plus checksum: a total of 4 bytes. */
    if (numbits-sync_len < 8*4) return false;

    uint64_t off = bitmap_seek_bits(bits,numbytes,0,numbits,sync_pattern);
    if (off == BITMAP_SEEK_NOT_FOUND) return false;
    FURI_LOG_E(TAG, "Chat preamble+sync found");

    /* If there is room on the left, let's mark the start of the message
     * a bit before: we don't try to detect all the preamble, but only
     * the first part, however it is likely present. */
    if (off >= 16) {
        off -= 16;
        sync_len += 16;
    }

    info->start_off = off;
    off += sync_len; /* Skip preamble and sync. */

    uint8_t raw[64] = {(uint8_t)'.'};
    uint32_t decoded =
        convert_from_line_code(raw,sizeof(raw),bits,numbytes,off,
            "100","110"); /* PWM */
    FURI_LOG_E(TAG, "Chat decoded bits: %lu", decoded);

    if (decoded < 8*4) return false; /* Min message len. */

    // The message needs to have a two bytes terminator before
    // the checksum.
    uint32_t j;
    for (j = 0; j < sizeof(raw)-1; j++)
        if (raw[j] == 0xff && raw[j+1] == 0xaa) break;

    if (j == sizeof(raw)-1) {
        FURI_LOG_E(TAG, "Chat: terminator not found");
        return false; // No terminator found.
    }

    uint32_t datalen = j+3; // If the terminator was found at j, then
                            // we need to sum three more bytes to have
                            // the len: FF itself, AA, checksum.
    info->pulses_count = sync_len + 8*3*datalen;

    // Check if the control sum matches.
    if (sum_bytes(raw,datalen-1,0) != raw[datalen-1]) {
        FURI_LOG_E(TAG, "Chat: checksum mismatch");
        return false;
    }

    // Check if the length of the sender looks sane
    uint8_t senderlen = raw[0];
    if (senderlen >= sizeof(raw)) {
        FURI_LOG_E(TAG, "Chat: invalid sender length");
        return false; // Overflow
    }

    fieldset_add_str(info->fieldset,"sender",(char*)raw+1,senderlen);
    fieldset_add_str(info->fieldset,"message",(char*)raw+1+senderlen,
                     datalen-senderlen-4);
    return true;
}

/* Give fields and defaults for the signal creator. */
static void get_fields(ProtoViewFieldSet *fieldset) {
    fieldset_add_str(fieldset,"sender","Carol",5);
    fieldset_add_str(fieldset,"message","Anyone hearing?",15);
}

/* Create a signal. */
static void build_message(RawSamplesBuffer *samples, ProtoViewFieldSet *fs)
{
    uint32_t te = 100; /* Short pulse duration in microseconds.
                          Our protocol needs three symbol times to send
                          a bit, so 300 us per bit = 3.33 kBaud. */

    // Preamble: 24 alternating 100us pulse/gap pairs.
    for (int j = 0; j < 24; j++) {
        raw_samples_add(samples,true,te);
        raw_samples_add(samples,false,te);
    }

    // Sync: 4 alternating 200 us pulse/gap pairs.
    for (int j = 0; j < 4; j++) {
        raw_samples_add(samples,true,te*2);
        raw_samples_add(samples,false,te*2);
    }

    // Data: build the array.
    uint32_t datalen = 1 + fs->fields[0]->len + // Userlen + Username
                       fs->fields[1]->len + 3;  // Message + FF + 00 + CRC
    uint8_t *data = malloc(datalen), *p = data;
    *p++ = fs->fields[0]->len;
    memcpy(p,fs->fields[0]->str,fs->fields[0]->len);
    p += fs->fields[0]->len;
    memcpy(p,fs->fields[1]->str,fs->fields[1]->len);
    p += fs->fields[1]->len;
    *p++ = 0xff;
    *p++ = 0xaa;
    *p = sum_bytes(data,datalen-1,0);

    // Emit bits
    for (uint32_t j = 0; j < datalen*8; j++) {
        if (bitmap_get(data,datalen,j)) {
            raw_samples_add(samples,true,te*2);
            raw_samples_add(samples,false,te);
        } else {
            raw_samples_add(samples,true,te);
            raw_samples_add(samples,false,te*2);
        }
    }
    free(data);
}

ProtoViewDecoder ProtoViewChatDecoder = {
    .name = "ProtoView chat",
    .decode = decode,
    .get_fields = get_fields,
    .build_message = build_message 
};