Info: Kitchen Vent Dimmer
Address: C8C8C1
Rate: 1
Ch: 122
CRC: 2
DPL: 0
RETR: 0x0F
Resend: 3
Delay_ms: 30

Payload struct: 2,1,1
EEPROM=0; RAM=1; PROGMEM=2; ID=3; RESET=4; WRAM=0x89; R1=0xC1; R2=0xC2; W1=0x81; W2=0x82

R default: ,EEPROM,R1
W default: n,,W1
Write start: 0,0,0x8F

R: ID*=,ID

R: CO2 level*2[3]=i:4,,R2
W: CO2 level*2=,i:4,W2

R: Fan speeds=25
W: Fan speeds=,25
R: FanSpeed[3]=i:19
W: FanSpeed=,i:19
R: FanCook speeds=26
W: FanCook speeds=,26
R: FanCookSpeed[3]=i:22
W: FanCookSpeed=,i:22

R: FanOnTime=10
W: FanOnTime=,10

R: FanOffTime=11
W: FanOffTime=,11

R: FanCookOnTime=12
W: FanCookOnTime=,12

R: FanCookOffTime=13
W: FanCookOffTime=,13

R: FanSleep=14
W: FanSleep=,14

R: FanCookSleep=15
W: FanCookSleep=,15

R: SpeedInitIdx=16
W: SpeedInitIdx=,16

R: SpeedKeyIdx=17
W: SpeedKeyIdx=,17

R: OutSpeedMax=18
W: OutSpeedMax=,18

R: ZeroCrossLag,us*2=27,,R2
W: ZeroCrossLag,us=,27,W2
R: SSR_PulseWidth,us*2=29,,R2
W: SSR_PulseWidth,us=,29,W2

R: PauseSetByCO2,min=31
W: PauseSetByCO2,min=,31

R: IRRemotes=32
W: IRRemotes=,32

R: IRRemotesHash*2[70]=i:33,,R2#
W: IRRemotesHash*2=,i:33,W2

R: Flags=1#
W: Flags=,1

R: RxAddr=2#
W: RxAddr=,2

R: Ch=3
W: Ch=,3

R: OSCCAL_EMEM=0
R: _OSCCAL=0x51,RAM
W: _OSCCAL=,0x51,WRAM
R: _PORTA=0x39,RAM
W: _PORTA=,0x3B,WRAM
R: _PORTB=0x36,RAM
W: _PORTB=,0x38,WRAM

R: _Fanspeed=0x75,RAM
R: _FanOn=0x76,RAM
R: _FanOnNext=0x74,RAM
R: _FanOnNextCnt=0x72,RAM
R: _FanOnLast=0x73,RAM
R: _IRHashLast*2=0x7B,RAM,R2#
R: _SleepTimer=0x83,RAM

R: _OutSpeedMax=0x86,RAM
W: _OutSpeedMax=,0x86,WRAM
R: _LED_Warning=0x6B,RAM
W: _LED_Warning=,0x6B,WRAM
R: _ZeroCrossDelay=0x8D,RAM,R2
W: _ZeroCrossDelay=,0x8D,WRAM,W2
R: _PulseDelayAfterZero=0x99,RAM,R2
W: _PulseDelayAfterZero=,0x99,WRAM,W2
R: _PulseWidth=0x8B,RAM,R2
W: _PulseWidth=,0x8B,WRAM,W2

W: Reset=,RESET,0xC1

S: Lamp=,0,0x40
S: Fan=,1,0x40
S: FanSpdUp=,2,0x40
S: FanSpdDn=,3,0x40
S: FanSpdSave=,4,0x40
S: SetupIR=,5,0x40

SBatch: Fan Cooker On: Fan=6
SBatch: Fan On: Fan=3
SBatch: Fan Off: Fan=0
SBatch: Lamp On: Lamp=1
SBatch: Lamp Off: Lamp=0
SBatch: Fan Up: FanSpdUp=0
SBatch: Fan Down: FanSpdDn=0
SBatch: Fan SAVE: FanSpdSave=0;
SBatch: Add new IR: SetupIR=1

RBatch: Work: ID;CO2 level;FanCookSpeed;FanCookOnTime;FanCookOffTime;FanCookSleep;FanSpeed;FanOnTime;FanOffTime;FanSleep
RBatch: Hardware: ID;RxAddr;Ch;SpeedInitIdx;Flags;OutSpeedMax;IRRemotes;ZeroCrossLag,us;SSR_PulseWidth,us;OSCCAL_EMEM
RBatch: All: ID;CO2 level;FanCookSpeed;FanCookOnTime;FanCookOffTime;FanCookSleep;FanSpeed;FanOnTime;FanOffTime;FanSleep;RxAddr;Ch;SpeedInitIdx;Flags;OutSpeedMax;IRRemotes;IRRemotesHash

WBatch: Init(Cook2spd,Lamp-F2.2): RxAddr=0xC1;Ch=122;CO2 level={870,930,1000};Fan speeds=3;FanSpeed={14,15,16};FanCook speeds=3;FanCookSpeed={15,16,32};FanSleep=20;FanCookSleep=6;FanOnTime=150;FanCookOnTime=0;FanOffTime=100;FanCookOffTime=0;SpeedInitIdx=0;SpeedKeyIdx=6;Flags=0x0D;OutPeriod=16;ZeroCrossLag,us=500;SSR_PulseWidth,us=9999
WBatch: IRRemotes clear: IRRemotes=0
WBatch: IRRemotes 1 kitchen: IRRemotes=1;IRRemotesHash={0x6DA5,0xFCA5,0x7CA5,0xB425,0x3425,0x1625,0x8525}
WBatch: Fans Speeds: Fan speeds=3;FanSpeed={14,15,16};FanCook speeds=3;FanCookSpeed={14,16,32}
WBatch: LED Warning: _LED Warning=0x10
WBatch: OSCCAL: _OSCCAL=146
WBatch: CO2 Level: CO2 level={750,850,1000}
WBatch: Reset: Reset