Info: CO2 sensor mini
Address: C8C8CF
Rate: 1
Ch: 122
CRC: 2
DPL: 0
RETR: 0x0F
Resend: 3
Delay_ms: 30
ReadCmd repeat: 3

Payload struct: 2,1,1
ROM=0x41;ROM2=0x42;WROM=0x81;WROM2=0x82;RAM=0x51;RAM2=0x52;WRAM=0x91;WRAM2=0x92;PGM=0x61;SET=0xC0

R default: ,,ROM
W default: n,,WROM
Write start: 0,0,0x2F

Listen: C8C8C1=CO2,Alarm,-

R: ID*=,0,0x65

R: _CO2*2=0x6C,,RAM2
R: _PORTA=0x39,,RAM
W: _PORTA=,0x3B,WRAM
R: _PORTB=0x36,,RAM
W: _PORTB=,0x38,WRAM
R: _OSCCAL=0x51,,RAM
W: _OSCCAL=,0x51,WRAM
R: OSCCAL_EMEM=0

R: RxAddr=1#
W: RxAddr=,1

R: Ch=2
W: Ch=,2

R: nRF RETR=3#
W: nRF RETR=,3

R: Send period=4
W: Send period=,4

R: CO2 threshold*2=5,,ROM2
W: CO2 threshold=,5,WROM2

R: CO2 correct*2=7,,ROM2
W: CO2 correct*2=,7,WROM2

R: FanLSB[10]=i:9#
W: FanLSB=,i:9

R: Transmit pause=19
W: Transmit pause=,19

R: Flags=20#
W: Flags=,20

W: Reset=0xEEEE,14,SET

R: _LED Warning=0x74,,RAM
W: _LED Warning=,0x74,WRAM

S: LED=,0,SET

SBatch: LED On: LED=1
SBatch: LED Off: LED=0

RBatch: Settings: ID;RxAddr;Ch;Send period;CO2 threshold;CO2 correct;FanLSB;nRF RETR;Transmit pause;Flags

WBatch: Default: RxAddr=0xCF;Ch=122;Send period=30;CO2 threshold=1000;CO2 correct=0;FanLSB={0xC1,0,0,0,0,0,0,0};nRF RETR=0x3;Transmit pause=1;Flags=0;Reset
WBatch: CO2: Send period=60;CO2 threshold=1000;CO2 correct=0
WBatch: Fan: FanLSB={0xC1,0,0,0,0,0,0,0,0,0};Reset
WBatch: RETR: nRF RETR=0x2F;Reset
WBatch: Transmit pause: Transmit pause=30
WBatch: Flags: Flags=0x00

WBatch: LED Warning: _LED Warning=0x30
WBatch: PORTA: _PORTA=0x0C
WBatch: PORTB: _PORTB=0xC
WBatch: OSCCAL: _OSCCAL=128

WBatch: Reset: Reset