Fix L5 HAL.

cmake/FindHAL.cmake

@@ -158,19 +158,17 @@ set(HAL_LL_DRIVERS_L4
 )
 
 set(HAL_DRIVERS_L5
-    adc comp cortex crc cryp dac def dfsdm dma exti fdcan flash flash_ramfunc
-    gpio gtzc hash i2c icache irda iwdg lptim mmc nand nor opamp ospi otfdef
-    pcd pka pwr rcc rng rtc sai sd smartcard smbus spi sram tim tsc uart usart
-    wwdg
+    adc comp cortex crc cryp dac dfsdm dma exti fdcan flash flash_ramfunc gpio 
+    gtzc hash i2c icache irda iwdg lptim mmc nand nor opamp ospi pcd pka pwr rcc 
+    rng rtc sai sd smartcard smbus spi sram tim tsc uart usart wwdg
 )
 set(HAL_EX_DRIVERS_L5
-    adc crc cryp dac dfsdm dma flash gpio hash i2c irda mmc opamp pcd pwr rcc
+    adc crc cryp dac dfsdm dma flash hash i2c mmc opamp pcd pwr rcc
     rng rtc sai sd smartcard spi tim uart usart
 )
 set(HAL_LL_DRIVERS_L5
-    adc bus comp cortex crc crs dac dma dmmux exti fmc gpio i2c iwdg lptim
-    lpuart opamp pka pwr rcc rng rtc sdmmc spi system tim ucpd usart usb utils
-    wwdg
+    adc comp crc crs dac dma exti fmc gpio i2c lptim lpuart opamp pka pwr rcc 
+    rng rtc sdmmc spi tim ucpd usart usb utils
 )
 
 foreach(FAMILY_SUFFIX ${STM32_SUPPORTED_FAMILIES_SHORT_NAME})
@@ -309,7 +307,7 @@ foreach(COMP ${HAL_FIND_COMPONENTS_FAMILIES})
         )
         list(APPEND HAL_${FAMILY}${CORE_U}_SOURCES "${HAL_${FAMILY}_${DRV}_SOURCE}")
         if(NOT HAL_${FAMILY}${CORE_U}_${DRV}_SOURCE)
-            message(WARNING "Cannot find ${DRV} driver for ${${FAMILY}${CORE_U}}")
+            message(WARNING "Cannot find ${DRV} driver for ${FAMILY}${CORE_U}")
             set(HAL_${DRV_COMP}_FOUND FALSE)
             continue()
         endif()
@@ -329,7 +327,7 @@ foreach(COMP ${HAL_FIND_COMPONENTS_FAMILIES})
             )
             list(APPEND HAL_${FAMILY}${CORE_U}_SOURCES "${HAL_${FAMILY}${CORE_U}_${DRV}_EX_SOURCE}")
             if(NOT HAL_${FAMILY}${CORE_U}_${DRV}_EX_SOURCE)
-                message(WARNING "Cannot find ${DRV}Ex driver for ${${FAMILY}${CORE_U}}")
+                message(WARNING "Cannot find ${DRV}Ex driver for ${FAMILY}${CORE_U}")
             endif()
                         
             if((TARGET HAL::STM32::${FAMILY}${CORE_C}::${DRV}) AND (NOT (TARGET HAL::STM32::${FAMILY}${CORE_C}::${DRV}Ex)))
@@ -356,7 +354,7 @@ foreach(COMP ${HAL_FIND_COMPONENTS_FAMILIES})
         )
         list(APPEND HAL_${FAMILY}${CORE_U}_SOURCES "${HAL_${FAMILY}_${DRV}_LL_SOURCE}")
         if(NOT HAL_${FAMILY}${CORE_U}_${DRV}_LL_SOURCE)
-            message(WARNING "Cannot find LL_${DRV} driver for ${${FAMILY}${CORE_U}}")
+            message(WARNING "Cannot find LL_${DRV} driver for ${FAMILY}${CORE_U}")
             set(HAL_${DRV_COMP}_FOUND FALSE)
             continue()
         endif()

tests/bsp/stm32l5xx_hal_conf.h

@@ -0,0 +1,439 @@
+/**
+  ******************************************************************************
+  * @file    stm32l5xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32l5xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32L5xx_HAL_CONF_H
+#define STM32L5xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DFSDM_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FDCAN_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_GTZC_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_ICACHE_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_MMC_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_OSPI_MODULE_ENABLED
+#define HAL_OTFDEC_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PKA_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE          16000000UL /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT 100UL   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+  #define MSI_VALUE          4000000UL /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE          16000000UL /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
+  *        This internal oscillator is mainly dedicated to provide a high precision clock to
+  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+  *        which is subject to manufacturing process variations.
+  */
+#if !defined  (HSI48_VALUE)
+  #define HSI48_VALUE        48000000UL /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
+                                          The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE           32000UL    /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                  /*!< Value of the Internal Low Speed oscillator in Hz
+                                          The real value may vary depending on the variations
+                                          in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE          32768UL    /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT 5000UL    /*!< Time out for LSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for SAI1 peripheral
+  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_SAI1_CLOCK_VALUE)
+  #define EXTERNAL_SAI1_CLOCK_VALUE  48000UL /*!< Value of the SAI1 External clock source in Hz*/
+#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
+
+/**
+  * @brief External clock source for SAI2 peripheral
+  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_SAI2_CLOCK_VALUE)
+  #define EXTERNAL_SAI2_CLOCK_VALUE   48000UL /*!< Value of the SAI2 External clock source in Hz*/
+#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define VDD_VALUE          3300UL /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY  ((1UL<<__NVIC_PRIO_BITS) - 1UL)  /*!< tick interrupt priority (lowest by default) */
+#define USE_RTOS           0U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT               1U */
+
+/* ################## Register callback feature configuration ############### */
+/**
+  * @brief Set below the peripheral configuration  to "1U" to add the support
+  *        of HAL callback registration/unregistration feature for the HAL
+  *        driver(s). This allows user application to provide specific callback
+  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
+  *        the default weak callback functions (see each stm32l5xx_hal_ppp.h file
+  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
+  *        for each PPP peripheral).
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS        0U
+#define USE_HAL_COMP_REGISTER_CALLBACKS       0U
+#define USE_HAL_CRYP_REGISTER_CALLBACKS       0U
+#define USE_HAL_DAC_REGISTER_CALLBACKS        0U
+#define USE_HAL_DFSDM_REGISTER_CALLBACKS      0U
+#define USE_HAL_FDCAN_REGISTER_CALLBACKS      0U
+#define USE_HAL_HASH_REGISTER_CALLBACKS       0U
+#define USE_HAL_I2C_REGISTER_CALLBACKS        0U
+#define USE_HAL_IRDA_REGISTER_CALLBACKS       0U
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS      0U
+#define USE_HAL_MMC_REGISTER_CALLBACKS        0U
+#define USE_HAL_NAND_REGISTER_CALLBACKS       0U
+#define USE_HAL_NOR_REGISTER_CALLBACKS        0U
+#define USE_HAL_OPAMP_REGISTER_CALLBACKS      0U
+#define USE_HAL_OSPI_REGISTER_CALLBACKS       0U
+#define USE_HAL_OTFDEC_REGISTER_CALLBACKS     0U
+#define USE_HAL_PCD_REGISTER_CALLBACKS        0U
+#define USE_HAL_PKA_REGISTER_CALLBACKS        0U
+#define USE_HAL_RNG_REGISTER_CALLBACKS        0U
+#define USE_HAL_RTC_REGISTER_CALLBACKS        0U
+#define USE_HAL_SAI_REGISTER_CALLBACKS        0U
+#define USE_HAL_SD_REGISTER_CALLBACKS         0U
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS      0U
+#define USE_HAL_SPI_REGISTER_CALLBACKS        0U
+#define USE_HAL_SRAM_REGISTER_CALLBACKS       0U
+#define USE_HAL_TIM_REGISTER_CALLBACKS        0U
+#define USE_HAL_TSC_REGISTER_CALLBACKS        0U
+#define USE_HAL_UART_REGISTER_CALLBACKS       0U
+#define USE_HAL_USART_REGISTER_CALLBACKS      0U
+#define USE_HAL_WWDG_REGISTER_CALLBACKS       0U
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+
+#define USE_SPI_CRC                   1U
+
+/* ################## CRYP peripheral configuration ########################## */
+
+#define USE_HAL_CRYP_SUSPEND_RESUME   1U
+
+/* ################## SDMMC peripheral configuration ######################### */
+
+#define USE_SD_TRANSCEIVER            0U
+
+
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32l5xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32l5xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32l5xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+  #include "stm32l5xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32l5xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32l5xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32l5xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32l5xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32l5xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32l5xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32l5xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+  #include "stm32l5xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32l5xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GTZC_MODULE_ENABLED
+  #include "stm32l5xx_hal_gtzc.h"
+#endif /* HAL_GTZC_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+  #include "stm32l5xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+  #include "stm32l5xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_ICACHE_MODULE_ENABLED
+  #include "stm32l5xx_hal_icache.h"
+#endif /* HAL_ICACHE_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+  #include "stm32l5xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+  #include "stm32l5xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+  #include "stm32l5xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+  #include "stm32l5xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32l5xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32l5xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+  #include "stm32l5xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+  #include "stm32l5xx_hal_ospi.h"
+#endif /* HAL_OSPI_MODULE_ENABLED */
+
+#ifdef HAL_OTFDEC_MODULE_ENABLED
+  #include "stm32l5xx_hal_otfdec.h"
+#endif /* HAL_OTFDEC_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+  #include "stm32l5xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PKA_MODULE_ENABLED
+  #include "stm32l5xx_hal_pka.h"
+#endif /* HAL_PKA_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+  #include "stm32l5xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+  #include "stm32l5xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+  #include "stm32l5xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+  #include "stm32l5xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+  #include "stm32l5xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+  #include "stm32l5xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+  #include "stm32l5xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+  #include "stm32l5xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32l5xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+  #include "stm32l5xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+  #include "stm32l5xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+  #include "stm32l5xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+  #include "stm32l5xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+  #include "stm32l5xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t *file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32L5xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

tests/fetch/stm32l5xx_hal_conf.h

@@ -0,0 +1,439 @@
+/**
+  ******************************************************************************
+  * @file    stm32l5xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32l5xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32L5xx_HAL_CONF_H
+#define STM32L5xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DFSDM_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FDCAN_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_GTZC_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_ICACHE_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_MMC_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_OSPI_MODULE_ENABLED
+#define HAL_OTFDEC_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PKA_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE          16000000UL /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT 100UL   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+  #define MSI_VALUE          4000000UL /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE          16000000UL /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
+  *        This internal oscillator is mainly dedicated to provide a high precision clock to
+  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+  *        which is subject to manufacturing process variations.
+  */
+#if !defined  (HSI48_VALUE)
+  #define HSI48_VALUE        48000000UL /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
+                                          The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE           32000UL    /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                  /*!< Value of the Internal Low Speed oscillator in Hz
+                                          The real value may vary depending on the variations
+                                          in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE          32768UL    /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT 5000UL    /*!< Time out for LSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for SAI1 peripheral
+  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_SAI1_CLOCK_VALUE)
+  #define EXTERNAL_SAI1_CLOCK_VALUE  48000UL /*!< Value of the SAI1 External clock source in Hz*/
+#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
+
+/**
+  * @brief External clock source for SAI2 peripheral
+  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_SAI2_CLOCK_VALUE)
+  #define EXTERNAL_SAI2_CLOCK_VALUE   48000UL /*!< Value of the SAI2 External clock source in Hz*/
+#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define VDD_VALUE          3300UL /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY  ((1UL<<__NVIC_PRIO_BITS) - 1UL)  /*!< tick interrupt priority (lowest by default) */
+#define USE_RTOS           0U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT               1U */
+
+/* ################## Register callback feature configuration ############### */
+/**
+  * @brief Set below the peripheral configuration  to "1U" to add the support
+  *        of HAL callback registration/unregistration feature for the HAL
+  *        driver(s). This allows user application to provide specific callback
+  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
+  *        the default weak callback functions (see each stm32l5xx_hal_ppp.h file
+  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
+  *        for each PPP peripheral).
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS        0U
+#define USE_HAL_COMP_REGISTER_CALLBACKS       0U
+#define USE_HAL_CRYP_REGISTER_CALLBACKS       0U
+#define USE_HAL_DAC_REGISTER_CALLBACKS        0U
+#define USE_HAL_DFSDM_REGISTER_CALLBACKS      0U
+#define USE_HAL_FDCAN_REGISTER_CALLBACKS      0U
+#define USE_HAL_HASH_REGISTER_CALLBACKS       0U
+#define USE_HAL_I2C_REGISTER_CALLBACKS        0U
+#define USE_HAL_IRDA_REGISTER_CALLBACKS       0U
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS      0U
+#define USE_HAL_MMC_REGISTER_CALLBACKS        0U
+#define USE_HAL_NAND_REGISTER_CALLBACKS       0U
+#define USE_HAL_NOR_REGISTER_CALLBACKS        0U
+#define USE_HAL_OPAMP_REGISTER_CALLBACKS      0U
+#define USE_HAL_OSPI_REGISTER_CALLBACKS       0U
+#define USE_HAL_OTFDEC_REGISTER_CALLBACKS     0U
+#define USE_HAL_PCD_REGISTER_CALLBACKS        0U
+#define USE_HAL_PKA_REGISTER_CALLBACKS        0U
+#define USE_HAL_RNG_REGISTER_CALLBACKS        0U
+#define USE_HAL_RTC_REGISTER_CALLBACKS        0U
+#define USE_HAL_SAI_REGISTER_CALLBACKS        0U
+#define USE_HAL_SD_REGISTER_CALLBACKS         0U
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS      0U
+#define USE_HAL_SPI_REGISTER_CALLBACKS        0U
+#define USE_HAL_SRAM_REGISTER_CALLBACKS       0U
+#define USE_HAL_TIM_REGISTER_CALLBACKS        0U
+#define USE_HAL_TSC_REGISTER_CALLBACKS        0U
+#define USE_HAL_UART_REGISTER_CALLBACKS       0U
+#define USE_HAL_USART_REGISTER_CALLBACKS      0U
+#define USE_HAL_WWDG_REGISTER_CALLBACKS       0U
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+
+#define USE_SPI_CRC                   1U
+
+/* ################## CRYP peripheral configuration ########################## */
+
+#define USE_HAL_CRYP_SUSPEND_RESUME   1U
+
+/* ################## SDMMC peripheral configuration ######################### */
+
+#define USE_SD_TRANSCEIVER            0U
+
+
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32l5xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32l5xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32l5xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+  #include "stm32l5xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32l5xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32l5xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32l5xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32l5xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32l5xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32l5xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32l5xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+  #include "stm32l5xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32l5xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GTZC_MODULE_ENABLED
+  #include "stm32l5xx_hal_gtzc.h"
+#endif /* HAL_GTZC_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+  #include "stm32l5xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+  #include "stm32l5xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_ICACHE_MODULE_ENABLED
+  #include "stm32l5xx_hal_icache.h"
+#endif /* HAL_ICACHE_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+  #include "stm32l5xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+  #include "stm32l5xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+  #include "stm32l5xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+  #include "stm32l5xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32l5xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32l5xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+  #include "stm32l5xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+  #include "stm32l5xx_hal_ospi.h"
+#endif /* HAL_OSPI_MODULE_ENABLED */
+
+#ifdef HAL_OTFDEC_MODULE_ENABLED
+  #include "stm32l5xx_hal_otfdec.h"
+#endif /* HAL_OTFDEC_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+  #include "stm32l5xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PKA_MODULE_ENABLED
+  #include "stm32l5xx_hal_pka.h"
+#endif /* HAL_PKA_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+  #include "stm32l5xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+  #include "stm32l5xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+  #include "stm32l5xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+  #include "stm32l5xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+  #include "stm32l5xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+  #include "stm32l5xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+  #include "stm32l5xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+  #include "stm32l5xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32l5xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+  #include "stm32l5xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+  #include "stm32l5xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+  #include "stm32l5xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+  #include "stm32l5xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+  #include "stm32l5xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t *file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32L5xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

tests/hal/stm32l5xx_hal_conf.h

@@ -0,0 +1,439 @@
+/**
+  ******************************************************************************
+  * @file    stm32l5xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32l5xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32L5xx_HAL_CONF_H
+#define STM32L5xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DFSDM_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FDCAN_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_GTZC_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_ICACHE_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_MMC_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_OSPI_MODULE_ENABLED
+#define HAL_OTFDEC_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PKA_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE          16000000UL /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT 100UL   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+  #define MSI_VALUE          4000000UL /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE          16000000UL /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
+  *        This internal oscillator is mainly dedicated to provide a high precision clock to
+  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+  *        which is subject to manufacturing process variations.
+  */
+#if !defined  (HSI48_VALUE)
+  #define HSI48_VALUE        48000000UL /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
+                                          The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE           32000UL    /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                  /*!< Value of the Internal Low Speed oscillator in Hz
+                                          The real value may vary depending on the variations
+                                          in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE          32768UL    /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT 5000UL    /*!< Time out for LSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for SAI1 peripheral
+  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_SAI1_CLOCK_VALUE)
+  #define EXTERNAL_SAI1_CLOCK_VALUE  48000UL /*!< Value of the SAI1 External clock source in Hz*/
+#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
+
+/**
+  * @brief External clock source for SAI2 peripheral
+  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_SAI2_CLOCK_VALUE)
+  #define EXTERNAL_SAI2_CLOCK_VALUE   48000UL /*!< Value of the SAI2 External clock source in Hz*/
+#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define VDD_VALUE          3300UL /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY  ((1UL<<__NVIC_PRIO_BITS) - 1UL)  /*!< tick interrupt priority (lowest by default) */
+#define USE_RTOS           0U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT               1U */
+
+/* ################## Register callback feature configuration ############### */
+/**
+  * @brief Set below the peripheral configuration  to "1U" to add the support
+  *        of HAL callback registration/unregistration feature for the HAL
+  *        driver(s). This allows user application to provide specific callback
+  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
+  *        the default weak callback functions (see each stm32l5xx_hal_ppp.h file
+  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
+  *        for each PPP peripheral).
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS        0U
+#define USE_HAL_COMP_REGISTER_CALLBACKS       0U
+#define USE_HAL_CRYP_REGISTER_CALLBACKS       0U
+#define USE_HAL_DAC_REGISTER_CALLBACKS        0U
+#define USE_HAL_DFSDM_REGISTER_CALLBACKS      0U
+#define USE_HAL_FDCAN_REGISTER_CALLBACKS      0U
+#define USE_HAL_HASH_REGISTER_CALLBACKS       0U
+#define USE_HAL_I2C_REGISTER_CALLBACKS        0U
+#define USE_HAL_IRDA_REGISTER_CALLBACKS       0U
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS      0U
+#define USE_HAL_MMC_REGISTER_CALLBACKS        0U
+#define USE_HAL_NAND_REGISTER_CALLBACKS       0U
+#define USE_HAL_NOR_REGISTER_CALLBACKS        0U
+#define USE_HAL_OPAMP_REGISTER_CALLBACKS      0U
+#define USE_HAL_OSPI_REGISTER_CALLBACKS       0U
+#define USE_HAL_OTFDEC_REGISTER_CALLBACKS     0U
+#define USE_HAL_PCD_REGISTER_CALLBACKS        0U
+#define USE_HAL_PKA_REGISTER_CALLBACKS        0U
+#define USE_HAL_RNG_REGISTER_CALLBACKS        0U
+#define USE_HAL_RTC_REGISTER_CALLBACKS        0U
+#define USE_HAL_SAI_REGISTER_CALLBACKS        0U
+#define USE_HAL_SD_REGISTER_CALLBACKS         0U
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS      0U
+#define USE_HAL_SPI_REGISTER_CALLBACKS        0U
+#define USE_HAL_SRAM_REGISTER_CALLBACKS       0U
+#define USE_HAL_TIM_REGISTER_CALLBACKS        0U
+#define USE_HAL_TSC_REGISTER_CALLBACKS        0U
+#define USE_HAL_UART_REGISTER_CALLBACKS       0U
+#define USE_HAL_USART_REGISTER_CALLBACKS      0U
+#define USE_HAL_WWDG_REGISTER_CALLBACKS       0U
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+
+#define USE_SPI_CRC                   1U
+
+/* ################## CRYP peripheral configuration ########################## */
+
+#define USE_HAL_CRYP_SUSPEND_RESUME   1U
+
+/* ################## SDMMC peripheral configuration ######################### */
+
+#define USE_SD_TRANSCEIVER            0U
+
+
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32l5xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32l5xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32l5xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+  #include "stm32l5xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32l5xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32l5xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32l5xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32l5xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32l5xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32l5xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32l5xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+  #include "stm32l5xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32l5xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GTZC_MODULE_ENABLED
+  #include "stm32l5xx_hal_gtzc.h"
+#endif /* HAL_GTZC_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+  #include "stm32l5xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+  #include "stm32l5xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_ICACHE_MODULE_ENABLED
+  #include "stm32l5xx_hal_icache.h"
+#endif /* HAL_ICACHE_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+  #include "stm32l5xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+  #include "stm32l5xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+  #include "stm32l5xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+  #include "stm32l5xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32l5xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32l5xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+  #include "stm32l5xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+  #include "stm32l5xx_hal_ospi.h"
+#endif /* HAL_OSPI_MODULE_ENABLED */
+
+#ifdef HAL_OTFDEC_MODULE_ENABLED
+  #include "stm32l5xx_hal_otfdec.h"
+#endif /* HAL_OTFDEC_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+  #include "stm32l5xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PKA_MODULE_ENABLED
+  #include "stm32l5xx_hal_pka.h"
+#endif /* HAL_PKA_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+  #include "stm32l5xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+  #include "stm32l5xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+  #include "stm32l5xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+  #include "stm32l5xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+  #include "stm32l5xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+  #include "stm32l5xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+  #include "stm32l5xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+  #include "stm32l5xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32l5xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+  #include "stm32l5xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+  #include "stm32l5xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+  #include "stm32l5xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+  #include "stm32l5xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+  #include "stm32l5xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t *file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32L5xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/