add actions

.github/workflows/cmake.yml

@@ -11,7 +11,7 @@ jobs:
     runs-on: ubuntu-20.04
     strategy:
       matrix:
-        family: [F0, F1, F2, F3, F4, F7, G0, G4, H7, L0, L1, L4, L5]
+        family: [F0, F1, F2, F3, F4, F7, G0, G4, H7, L0, L1, L4, L5, WB, WL]
       fail-fast: false
 
     steps:

cmake/FindHAL.cmake

@@ -176,7 +176,7 @@ set(HAL_LL_DRIVERS_L5
 set(HAL_DRIVERS_WB
     adc comp cortex crc cryp dma exti flash gpio hsem 
     i2c ipcc irda iwdg lcd lptim pcd pka pwr qspi rcc 
-    rng rtc sai smartcard smbus spi sram tim tsc uart usart wwdg
+    rng rtc sai smartcard smbus spi tim tsc uart usart wwdg
 )
 set(HAL_EX_DRIVERS_WB
     adc crc cryp dma flash i2c pcd pwr rcc
@@ -188,7 +188,7 @@ set(HAL_LL_DRIVERS_WB
 )
 
 set(HAL_DRIVERS_WL
-    adc comp cortex crc cryp dac def dma exti flash gpio gtzc hsem 
+    adc comp cortex crc cryp dac dma exti flash gpio gtzc hsem 
     i2c i2s ipcc irda iwdg lptim pka pwr rcc 
     rng rtc smartcard smbus spi subghz tim uart usart wwdg
 )
@@ -197,8 +197,8 @@ set(HAL_EX_DRIVERS_WL
     rng rtc smartcard spi tim uart usart
 )
 set(HAL_LL_DRIVERS_WL
-    adc bus comp cortex crc dac dma dmamux exti gpio hsem i2c ipcc iwdg lptim lpuart pka pwr rcc 
-    rng rtc spi system tim usart utils wwdg
+    adc comp crc dac dma exti gpio i2c lptim lpuart pka pwr rcc 
+    rng rtc spi tim usart utils
 )
 
 foreach(FAMILY_SUFFIX ${STM32_SUPPORTED_FAMILIES_SHORT_NAME})

cmake/stm32/common.cmake

@@ -3,7 +3,7 @@ set(STM32_SUPPORTED_FAMILIES_LONG_NAME
     STM32G0 STM32G4
     STM32H7_M4 STM32H7_M7
     STM32L0 STM32L1 STM32L4 STM32L5
-    STM32WB STM32WL )
+    STM32WB_M4 STM32WL_M4 STM32WL_M0PLUS )
 
 foreach(FAMILY ${STM32_SUPPORTED_FAMILIES_LONG_NAME})
     # append short names (F0, F1, H7_M4, ...) to STM32_SUPPORTED_FAMILIES_SHORT_NAME
@@ -143,6 +143,10 @@ function(stm32_get_cores CORES)
     elseif(ARG_FAMILY)
         if(${ARG_FAMILY} STREQUAL "H7")
             set(${CORES} M7 M4 PARENT_SCOPE)
+        elseif(${ARG_FAMILY} STREQUAL "WB")
+            set(${CORES} M4 PARENT_SCOPE)
+        elseif(${ARG_FAMILY} STREQUAL "WL")
+            set(${CORES} M4 M0PLUS PARENT_SCOPE)
         else()
             set(${CORES} "" PARENT_SCOPE)
         endif()

cmake/stm32/utilities.cmake

@@ -44,10 +44,10 @@ endfunction()
 
 include(FetchContent)
 
-set(STM32_FETCH_FAMILIES       F0      F1      F2      F3      F4       F7      G0      G4      H7       L0      L1      L4      L5)
-set(STM32_FETCH_CUBE_VERSIONS  v1.11.2 v1.8.4  v1.9.3  v1.11.2 v1.26.1  v1.16.1 v1.4.1  v1.4.0  v1.9.0   v1.12.0 v1.10.3 v1.17.0 v1.4.0)
-set(STM32_FETCH_CMSIS_VERSIONS v2.3.5  v4.3.3  v2.2.5  v2.3.5  v2.6.6   v1.2.6  v1.4.0  v1.2.1  v1.10.0  v1.9.1  v2.3.2  v1.7.1  v1.0.4)
-set(STM32_FETCH_HAL_VERSIONS   v1.7.5  v1.1.8  v1.2.7  v1.5.5  v1.7.12  v1.2.9  v1.4.1  v1.2.1  v1.10.0  v1.10.4 v1.4.4  v1.13.0 v1.0.4)
+set(STM32_FETCH_FAMILIES       F0      F1      F2      F3      F4       F7      G0      G4      H7       L0      L1      L4      L5     WB      WL    )
+set(STM32_FETCH_CUBE_VERSIONS  v1.11.2 v1.8.4  v1.9.3  v1.11.2 v1.26.1  v1.16.1 v1.4.1  v1.4.0  v1.9.0   v1.12.0 v1.10.3 v1.17.0 v1.4.0 v1.11.1 v1.0.0)
+set(STM32_FETCH_CMSIS_VERSIONS v2.3.5  v4.3.3  v2.2.5  v2.3.5  v2.6.6   v1.2.6  v1.4.0  v1.2.1  v1.10.0  v1.9.1  v2.3.2  v1.7.1  v1.0.4 v1.8.0  v1.0.0)
+set(STM32_FETCH_HAL_VERSIONS   v1.7.5  v1.1.8  v1.2.7  v1.5.5  v1.7.12  v1.2.9  v1.4.1  v1.2.1  v1.10.0  v1.10.4 v1.4.4  v1.13.0 v1.0.4 v1.8.0  v1.0.0)
 
 FetchContent_Declare(
     STM32-CMSIS

tests/bsp/CMakeLists.txt

@@ -2,8 +2,7 @@ cmake_minimum_required(VERSION 3.13)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    # Can't test H7 because it needs some non-free components
-    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 L0 L1 L4)
+    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 WB WL)
 endif()
 
 # Nucleo boards can have different devices on it

tests/bsp/stm32wbxx_hal_conf.h

@@ -0,0 +1,355 @@
+/**
+  ******************************************************************************
+  * @file    stm32wbxx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32WBxx_HAL_CONF_H
+#define STM32WBxx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_IPCC_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LCD_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PKA_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+#define USE_HAL_ADC_REGISTER_CALLBACKS       0u
+#define USE_HAL_COMP_REGISTER_CALLBACKS      0u
+#define USE_HAL_CRYP_REGISTER_CALLBACKS      0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS       0u
+#define USE_HAL_IRDA_REGISTER_CALLBACKS      0u
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS     0u
+#define USE_HAL_PCD_REGISTER_CALLBACKS       0u
+#define USE_HAL_PKA_REGISTER_CALLBACKS       0u
+#define USE_HAL_QSPI_REGISTER_CALLBACKS      0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS       0u
+#define USE_HAL_RTC_REGISTER_CALLBACKS       0u
+#define USE_HAL_SAI_REGISTER_CALLBACKS       0u
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS     0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS       0u
+#define USE_HAL_TIM_REGISTER_CALLBACKS       0u
+#define USE_HAL_TSC_REGISTER_CALLBACKS       0u
+#define USE_HAL_UART_REGISTER_CALLBACKS      0u
+#define USE_HAL_USART_REGISTER_CALLBACKS     0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS      0u
+
+#define USE_HAL_CRYP_SUSPEND_RESUME 0u
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    (32000000UL) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    (100UL)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+  #define MSI_VALUE    (4000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    (16000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI1) value.
+  */
+#if !defined  (LSI1_VALUE) 
+ #define LSI1_VALUE  (32000UL)       /*!< LSI1 Typical Value in Hz*/
+#endif /* LSI1_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+/**
+  * @brief Internal Low Speed oscillator (LSI2) value.
+  */
+#if !defined  (LSI2_VALUE) 
+ #define LSI2_VALUE  (32000UL)       /*!< LSI2 Typical Value in Hz*/
+#endif /* LSI2_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    (32768UL) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+/**
+  * @brief Internal Multiple Speed oscillator (HSI48) default value.
+  *        This value is the default HSI48 range value after Reset.
+  */
+#if !defined (HSI48_VALUE)
+  #define HSI48_VALUE    (48000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI48_VALUE */
+   
+#if !defined (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    (5000UL)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for SAI1 peripheral
+  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 
+  *        frequency.
+  */
+#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
+  #define EXTERNAL_SAI1_CLOCK_VALUE    (48000UL) /*!< Value of the SAI1 External clock source in Hz*/
+#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    (3300UL) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority (lowest by default) */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+
+#define USE_SPI_CRC                   1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32wbxx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32wbxx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32wbxx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32wbxx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32wbxx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32wbxx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32wbxx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+   
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32wbxx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32wbxx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+  #include "stm32wbxx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32wbxx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_IPCC_MODULE_ENABLED
+ #include "stm32wbxx_hal_ipcc.h"
+#endif /* HAL_IPCC_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32wbxx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32wbxx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+ #include "stm32wbxx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+  #include "stm32wbxx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+  #include "stm32wbxx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PKA_MODULE_ENABLED
+  #include "stm32wbxx_hal_pka.h"
+#endif /* HAL_PKA_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32wbxx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32wbxx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32wbxx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+  #include "stm32wbxx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+    
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32wbxx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32wbxx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32wbxx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32wbxx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32wbxx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32wbxx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+  #include "stm32wbxx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32wbxx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32wbxx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32wbxx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32WBxx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

tests/bsp/stm32wlxx_hal_conf.h

@@ -0,0 +1,340 @@
+/**
+  ******************************************************************************
+  * @file    stm32wlxx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32WLxx_HAL_CONF_H
+#define STM32WLxx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_GTZC_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IPCC_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_PKA_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SUBGHZ_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+
+/* ########################## Register Callbacks selection ############################## */
+/**
+  * @brief This is the list of modules where register callback can be used
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS         0u
+#define USE_HAL_COMP_REGISTER_CALLBACKS        0u
+#define USE_HAL_CRYP_REGISTER_CALLBACKS        0u
+#define USE_HAL_DAC_REGISTER_CALLBACKS         0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS         0u
+#define USE_HAL_I2S_REGISTER_CALLBACKS         0u
+#define USE_HAL_IRDA_REGISTER_CALLBACKS        0u
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS       0u
+#define USE_HAL_PKA_REGISTER_CALLBACKS         0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS         0u
+#define USE_HAL_RTC_REGISTER_CALLBACKS         0u
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0u
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS       0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS         0u
+#define USE_HAL_SUBGHZ_REGISTER_CALLBACKS      0u
+#define USE_HAL_TIM_REGISTER_CALLBACKS         0u
+#define USE_HAL_UART_REGISTER_CALLBACKS        0u
+#define USE_HAL_USART_REGISTER_CALLBACKS       0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS        0u
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+
+#if !defined (HSE_VALUE)
+#define HSE_VALUE                           32000000UL  /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT                 100UL       /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+#define MSI_VALUE                           4000000UL   /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE                           16000000UL  /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined (LSI_VALUE)
+#define LSI_VALUE                           32000UL     /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                                  /*!< Value of the Internal Low Speed oscillator in Hz
+                                                        The real value may vary depending on the variations
+                                                        in voltage and temperature. */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined (LSE_VALUE)
+#define LSE_VALUE                           32768UL     /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+/**
+  * @brief Internal Multiple Speed oscillator (HSI48) default value.
+  *        This value is the default HSI48 range value after Reset.
+  */
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE                         48000000UL  /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI48_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT                 5000UL      /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                          3300U                             /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY                  ((1uL <<__NVIC_PRIO_BITS) - 1uL)  /*!< tick interrupt priority (lowest by default) */
+#define  USE_RTOS                           0U
+#define  PREFETCH_ENABLE                    0U
+#define  INSTRUCTION_CACHE_ENABLE           1U
+#define  DATA_CACHE_ENABLE                  1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1 */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+
+#define USE_SPI_CRC                         1U
+
+/* ################## CRYP peripheral configuration ########################## */
+
+#define USE_HAL_CRYP_SUSPEND_RESUME         1U
+
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32wlxx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32wlxx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32wlxx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32wlxx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32wlxx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32wlxx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32wlxx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32wlxx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32wlxx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32wlxx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_GTZC_MODULE_ENABLED
+  #include "stm32wlxx_hal_gtzc.h"
+#endif /* HAL_GTZC_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+  #include "stm32wlxx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+  #include "stm32wlxx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+  #include "stm32wlxx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IPCC_MODULE_ENABLED
+  #include "stm32wlxx_hal_ipcc.h"
+#endif /* HAL_IPCC_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+  #include "stm32wlxx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+  #include "stm32wlxx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+  #include "stm32wlxx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_PKA_MODULE_ENABLED
+  #include "stm32wlxx_hal_pka.h"
+#endif /* HAL_PKA_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+  #include "stm32wlxx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32wlxx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+  #include "stm32wlxx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+  #include "stm32wlxx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+  #include "stm32wlxx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+  #include "stm32wlxx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+  #include "stm32wlxx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SUBGHZ_MODULE_ENABLED
+  #include "stm32wlxx_hal_subghz.h"
+#endif /* HAL_SUBGHZ_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+  #include "stm32wlxx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+  #include "stm32wlxx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+  #include "stm32wlxx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+  #include "stm32wlxx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32WLxx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

tests/cmsis/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.13)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5)
+    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 WB WL)
 endif()
 
 project(cmsis-test C ASM)

tests/fetch/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.13)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5)
+    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 WB WL)
 endif()
 
 project(fetch-test C ASM)

tests/fetch/stm32wbxx_hal_conf.h

@@ -0,0 +1,355 @@
+/**
+  ******************************************************************************
+  * @file    stm32wbxx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32WBxx_HAL_CONF_H
+#define STM32WBxx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_IPCC_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LCD_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PKA_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+#define USE_HAL_ADC_REGISTER_CALLBACKS       0u
+#define USE_HAL_COMP_REGISTER_CALLBACKS      0u
+#define USE_HAL_CRYP_REGISTER_CALLBACKS      0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS       0u
+#define USE_HAL_IRDA_REGISTER_CALLBACKS      0u
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS     0u
+#define USE_HAL_PCD_REGISTER_CALLBACKS       0u
+#define USE_HAL_PKA_REGISTER_CALLBACKS       0u
+#define USE_HAL_QSPI_REGISTER_CALLBACKS      0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS       0u
+#define USE_HAL_RTC_REGISTER_CALLBACKS       0u
+#define USE_HAL_SAI_REGISTER_CALLBACKS       0u
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS     0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS       0u
+#define USE_HAL_TIM_REGISTER_CALLBACKS       0u
+#define USE_HAL_TSC_REGISTER_CALLBACKS       0u
+#define USE_HAL_UART_REGISTER_CALLBACKS      0u
+#define USE_HAL_USART_REGISTER_CALLBACKS     0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS      0u
+
+#define USE_HAL_CRYP_SUSPEND_RESUME 0u
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    (32000000UL) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    (100UL)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+  #define MSI_VALUE    (4000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    (16000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI1) value.
+  */
+#if !defined  (LSI1_VALUE) 
+ #define LSI1_VALUE  (32000UL)       /*!< LSI1 Typical Value in Hz*/
+#endif /* LSI1_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+/**
+  * @brief Internal Low Speed oscillator (LSI2) value.
+  */
+#if !defined  (LSI2_VALUE) 
+ #define LSI2_VALUE  (32000UL)       /*!< LSI2 Typical Value in Hz*/
+#endif /* LSI2_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    (32768UL) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+/**
+  * @brief Internal Multiple Speed oscillator (HSI48) default value.
+  *        This value is the default HSI48 range value after Reset.
+  */
+#if !defined (HSI48_VALUE)
+  #define HSI48_VALUE    (48000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI48_VALUE */
+   
+#if !defined (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    (5000UL)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for SAI1 peripheral
+  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 
+  *        frequency.
+  */
+#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
+  #define EXTERNAL_SAI1_CLOCK_VALUE    (48000UL) /*!< Value of the SAI1 External clock source in Hz*/
+#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    (3300UL) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority (lowest by default) */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+
+#define USE_SPI_CRC                   1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32wbxx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32wbxx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32wbxx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32wbxx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32wbxx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32wbxx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32wbxx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+   
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32wbxx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32wbxx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+  #include "stm32wbxx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32wbxx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_IPCC_MODULE_ENABLED
+ #include "stm32wbxx_hal_ipcc.h"
+#endif /* HAL_IPCC_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32wbxx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32wbxx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+ #include "stm32wbxx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+  #include "stm32wbxx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+  #include "stm32wbxx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PKA_MODULE_ENABLED
+  #include "stm32wbxx_hal_pka.h"
+#endif /* HAL_PKA_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32wbxx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32wbxx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32wbxx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+  #include "stm32wbxx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+    
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32wbxx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32wbxx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32wbxx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32wbxx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32wbxx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32wbxx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+  #include "stm32wbxx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32wbxx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32wbxx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32wbxx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32WBxx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

tests/fetch/stm32wlxx_hal_conf.h

@@ -0,0 +1,340 @@
+/**
+  ******************************************************************************
+  * @file    stm32wlxx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32WLxx_HAL_CONF_H
+#define STM32WLxx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_GTZC_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IPCC_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_PKA_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SUBGHZ_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+
+/* ########################## Register Callbacks selection ############################## */
+/**
+  * @brief This is the list of modules where register callback can be used
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS         0u
+#define USE_HAL_COMP_REGISTER_CALLBACKS        0u
+#define USE_HAL_CRYP_REGISTER_CALLBACKS        0u
+#define USE_HAL_DAC_REGISTER_CALLBACKS         0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS         0u
+#define USE_HAL_I2S_REGISTER_CALLBACKS         0u
+#define USE_HAL_IRDA_REGISTER_CALLBACKS        0u
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS       0u
+#define USE_HAL_PKA_REGISTER_CALLBACKS         0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS         0u
+#define USE_HAL_RTC_REGISTER_CALLBACKS         0u
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0u
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS       0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS         0u
+#define USE_HAL_SUBGHZ_REGISTER_CALLBACKS      0u
+#define USE_HAL_TIM_REGISTER_CALLBACKS         0u
+#define USE_HAL_UART_REGISTER_CALLBACKS        0u
+#define USE_HAL_USART_REGISTER_CALLBACKS       0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS        0u
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+
+#if !defined (HSE_VALUE)
+#define HSE_VALUE                           32000000UL  /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT                 100UL       /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+#define MSI_VALUE                           4000000UL   /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE                           16000000UL  /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined (LSI_VALUE)
+#define LSI_VALUE                           32000UL     /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                                  /*!< Value of the Internal Low Speed oscillator in Hz
+                                                        The real value may vary depending on the variations
+                                                        in voltage and temperature. */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined (LSE_VALUE)
+#define LSE_VALUE                           32768UL     /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+/**
+  * @brief Internal Multiple Speed oscillator (HSI48) default value.
+  *        This value is the default HSI48 range value after Reset.
+  */
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE                         48000000UL  /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI48_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT                 5000UL      /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                          3300U                             /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY                  ((1uL <<__NVIC_PRIO_BITS) - 1uL)  /*!< tick interrupt priority (lowest by default) */
+#define  USE_RTOS                           0U
+#define  PREFETCH_ENABLE                    0U
+#define  INSTRUCTION_CACHE_ENABLE           1U
+#define  DATA_CACHE_ENABLE                  1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1 */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+
+#define USE_SPI_CRC                         1U
+
+/* ################## CRYP peripheral configuration ########################## */
+
+#define USE_HAL_CRYP_SUSPEND_RESUME         1U
+
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32wlxx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32wlxx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32wlxx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32wlxx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32wlxx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32wlxx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32wlxx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32wlxx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32wlxx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32wlxx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_GTZC_MODULE_ENABLED
+  #include "stm32wlxx_hal_gtzc.h"
+#endif /* HAL_GTZC_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+  #include "stm32wlxx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+  #include "stm32wlxx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+  #include "stm32wlxx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IPCC_MODULE_ENABLED
+  #include "stm32wlxx_hal_ipcc.h"
+#endif /* HAL_IPCC_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+  #include "stm32wlxx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+  #include "stm32wlxx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+  #include "stm32wlxx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_PKA_MODULE_ENABLED
+  #include "stm32wlxx_hal_pka.h"
+#endif /* HAL_PKA_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+  #include "stm32wlxx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32wlxx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+  #include "stm32wlxx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+  #include "stm32wlxx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+  #include "stm32wlxx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+  #include "stm32wlxx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+  #include "stm32wlxx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SUBGHZ_MODULE_ENABLED
+  #include "stm32wlxx_hal_subghz.h"
+#endif /* HAL_SUBGHZ_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+  #include "stm32wlxx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+  #include "stm32wlxx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+  #include "stm32wlxx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+  #include "stm32wlxx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32WLxx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

tests/hal/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.13)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5)
+    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 WB WL)
 endif()
 
 project(hal-test C ASM)

tests/hal/stm32wbxx_hal_conf.h

@@ -0,0 +1,355 @@
+/**
+  ******************************************************************************
+  * @file    stm32wbxx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the 
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32WBxx_HAL_CONF_H
+#define STM32WBxx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_IPCC_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LCD_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PKA_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+#define USE_HAL_ADC_REGISTER_CALLBACKS       0u
+#define USE_HAL_COMP_REGISTER_CALLBACKS      0u
+#define USE_HAL_CRYP_REGISTER_CALLBACKS      0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS       0u
+#define USE_HAL_IRDA_REGISTER_CALLBACKS      0u
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS     0u
+#define USE_HAL_PCD_REGISTER_CALLBACKS       0u
+#define USE_HAL_PKA_REGISTER_CALLBACKS       0u
+#define USE_HAL_QSPI_REGISTER_CALLBACKS      0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS       0u
+#define USE_HAL_RTC_REGISTER_CALLBACKS       0u
+#define USE_HAL_SAI_REGISTER_CALLBACKS       0u
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS     0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS       0u
+#define USE_HAL_TIM_REGISTER_CALLBACKS       0u
+#define USE_HAL_TSC_REGISTER_CALLBACKS       0u
+#define USE_HAL_UART_REGISTER_CALLBACKS      0u
+#define USE_HAL_USART_REGISTER_CALLBACKS     0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS      0u
+
+#define USE_HAL_CRYP_SUSPEND_RESUME 0u
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    (32000000UL) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    (100UL)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+  #define MSI_VALUE    (4000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    (16000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI1) value.
+  */
+#if !defined  (LSI1_VALUE) 
+ #define LSI1_VALUE  (32000UL)       /*!< LSI1 Typical Value in Hz*/
+#endif /* LSI1_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+/**
+  * @brief Internal Low Speed oscillator (LSI2) value.
+  */
+#if !defined  (LSI2_VALUE) 
+ #define LSI2_VALUE  (32000UL)       /*!< LSI2 Typical Value in Hz*/
+#endif /* LSI2_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    (32768UL) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+/**
+  * @brief Internal Multiple Speed oscillator (HSI48) default value.
+  *        This value is the default HSI48 range value after Reset.
+  */
+#if !defined (HSI48_VALUE)
+  #define HSI48_VALUE    (48000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI48_VALUE */
+   
+#if !defined (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    (5000UL)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for SAI1 peripheral
+  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 
+  *        frequency.
+  */
+#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
+  #define EXTERNAL_SAI1_CLOCK_VALUE    (48000UL) /*!< Value of the SAI1 External clock source in Hz*/
+#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    (3300UL) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority (lowest by default) */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+
+#define USE_SPI_CRC                   1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32wbxx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32wbxx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32wbxx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32wbxx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32wbxx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32wbxx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32wbxx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+   
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32wbxx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32wbxx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+  #include "stm32wbxx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32wbxx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_IPCC_MODULE_ENABLED
+ #include "stm32wbxx_hal_ipcc.h"
+#endif /* HAL_IPCC_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32wbxx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32wbxx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+ #include "stm32wbxx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+  #include "stm32wbxx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+  #include "stm32wbxx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PKA_MODULE_ENABLED
+  #include "stm32wbxx_hal_pka.h"
+#endif /* HAL_PKA_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32wbxx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32wbxx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32wbxx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+  #include "stm32wbxx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+    
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32wbxx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32wbxx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32wbxx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32wbxx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32wbxx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32wbxx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+  #include "stm32wbxx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32wbxx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32wbxx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32wbxx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32WBxx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

tests/hal/stm32wlxx_hal_conf.h

@@ -0,0 +1,340 @@
+/**
+  ******************************************************************************
+  * @file    stm32wlxx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32WLxx_HAL_CONF_H
+#define STM32WLxx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_GTZC_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IPCC_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_PKA_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SUBGHZ_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+
+/* ########################## Register Callbacks selection ############################## */
+/**
+  * @brief This is the list of modules where register callback can be used
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS         0u
+#define USE_HAL_COMP_REGISTER_CALLBACKS        0u
+#define USE_HAL_CRYP_REGISTER_CALLBACKS        0u
+#define USE_HAL_DAC_REGISTER_CALLBACKS         0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS         0u
+#define USE_HAL_I2S_REGISTER_CALLBACKS         0u
+#define USE_HAL_IRDA_REGISTER_CALLBACKS        0u
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS       0u
+#define USE_HAL_PKA_REGISTER_CALLBACKS         0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS         0u
+#define USE_HAL_RTC_REGISTER_CALLBACKS         0u
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0u
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS       0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS         0u
+#define USE_HAL_SUBGHZ_REGISTER_CALLBACKS      0u
+#define USE_HAL_TIM_REGISTER_CALLBACKS         0u
+#define USE_HAL_UART_REGISTER_CALLBACKS        0u
+#define USE_HAL_USART_REGISTER_CALLBACKS       0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS        0u
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+
+#if !defined (HSE_VALUE)
+#define HSE_VALUE                           32000000UL  /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT                 100UL       /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+#define MSI_VALUE                           4000000UL   /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE                           16000000UL  /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined (LSI_VALUE)
+#define LSI_VALUE                           32000UL     /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                                  /*!< Value of the Internal Low Speed oscillator in Hz
+                                                        The real value may vary depending on the variations
+                                                        in voltage and temperature. */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined (LSE_VALUE)
+#define LSE_VALUE                           32768UL     /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+/**
+  * @brief Internal Multiple Speed oscillator (HSI48) default value.
+  *        This value is the default HSI48 range value after Reset.
+  */
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE                         48000000UL  /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI48_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT                 5000UL      /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                          3300U                             /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY                  ((1uL <<__NVIC_PRIO_BITS) - 1uL)  /*!< tick interrupt priority (lowest by default) */
+#define  USE_RTOS                           0U
+#define  PREFETCH_ENABLE                    0U
+#define  INSTRUCTION_CACHE_ENABLE           1U
+#define  DATA_CACHE_ENABLE                  1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1 */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+
+#define USE_SPI_CRC                         1U
+
+/* ################## CRYP peripheral configuration ########################## */
+
+#define USE_HAL_CRYP_SUSPEND_RESUME         1U
+
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32wlxx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32wlxx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32wlxx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32wlxx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32wlxx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32wlxx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32wlxx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32wlxx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32wlxx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32wlxx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_GTZC_MODULE_ENABLED
+  #include "stm32wlxx_hal_gtzc.h"
+#endif /* HAL_GTZC_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+  #include "stm32wlxx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+  #include "stm32wlxx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+  #include "stm32wlxx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IPCC_MODULE_ENABLED
+  #include "stm32wlxx_hal_ipcc.h"
+#endif /* HAL_IPCC_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+  #include "stm32wlxx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+  #include "stm32wlxx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+  #include "stm32wlxx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_PKA_MODULE_ENABLED
+  #include "stm32wlxx_hal_pka.h"
+#endif /* HAL_PKA_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+  #include "stm32wlxx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32wlxx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+  #include "stm32wlxx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+  #include "stm32wlxx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+  #include "stm32wlxx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+  #include "stm32wlxx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+  #include "stm32wlxx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SUBGHZ_MODULE_ENABLED
+  #include "stm32wlxx_hal_subghz.h"
+#endif /* HAL_SUBGHZ_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+  #include "stm32wlxx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+  #include "stm32wlxx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+  #include "stm32wlxx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+  #include "stm32wlxx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32WLxx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/