STM32U0 family support

.github/workflows/cmake.yml

@@ -11,7 +11,7 @@ jobs:
     runs-on: ubuntu-20.04
     strategy:
       matrix:
-        family: [C0, F0, F1, F2, F3, F4, F7, G0, G4, H5, H7, L0, L1, L4, L5, U5, WB, WL, MP1]
+        family: [C0, F0, F1, F2, F3, F4, F7, G0, G4, H5, H7, L0, L1, L4, L5, U0, U5, WB, WL, MP1]
       fail-fast: false
 
     steps:

README.md

@@ -3,7 +3,7 @@
 ![Tests](https://github.com/ObKo/stm32-cmake/workflows/Tests/badge.svg)
 
 This project is used to develop applications for the STM32 - ST's ARM Cortex-Mx MCUs.
-It uses cmake and GCC, along with newlib (libc), STM32Cube. Supports C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 U5 WB WL device families.
+It uses cmake and GCC, along with newlib (libc), STM32Cube. Supports C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 U0 U5 WB WL device families.
 
 ## Requirements
 
@@ -56,7 +56,7 @@ The most important set of variables which needs to be set can be found in the fo
 These configuration options need to be set for the build process to work properly:
 
 * `STM32_CUBE_<FAMILY>_PATH` - path to STM32Cube directory, where `<FAMILY>` is one
-   of `C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 U5 WB WL` **default**: `/opt/STM32Cube<FAMILY>`
+   of `C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 U0 U5 WB WL` **default**: `/opt/STM32Cube<FAMILY>`
 
 These configuration variables are optional:
 

cmake/FindBSP.cmake

@@ -252,6 +252,17 @@ set(BSP_MP1_COMPONENTS )
 set(BSP_MP1_SOURCES_STM32MP15xx_DISCO bus stpmic1)
 set(BSP_MP1_SOURCES_STM32MP15xx_EVAL bus stpmic1)
 
+### U0 ###
+set(BSP_U0_BOARDS
+    STM32U0xx_Nucleo STM32U083C_Discovery
+)
+set(BSP_U0_COMPONENTS 
+    stts22h
+)
+
+set(BSP_U0_SOURCES_STM32U083C_Discovery stts22h)
+set(BSP_U0_DEVICE_STM32U083C_Discovery U083CC)
+
 ### WB ###
 set(BSP_WB_BOARDS
     STM32WB15CC_Nucleo STM32WB55_Nucleo STM32WB55_USBDongle STM32WB5MM_Discovery

cmake/stm32/common.cmake

@@ -5,6 +5,7 @@ set(STM32_SUPPORTED_FAMILIES_LONG_NAME
     STM32H5
     STM32H7_M4 STM32H7_M7
     STM32L0 STM32L1 STM32L4 STM32L5
+    STM32U0
     STM32U5
     STM32WB_M4 STM32WL_M4 STM32WL_M0PLUS
     STM32MP1_M4 )
@@ -397,6 +398,7 @@ include(stm32/l0)
 include(stm32/l1)
 include(stm32/l4)
 include(stm32/l5)
+include(stm32/u0)
 include(stm32/u5)
 include(stm32/wb)
 include(stm32/wl)

cmake/stm32/devices.cmake

@@ -1186,6 +1186,27 @@ set(STM32_ALL_DEVICES
     MP157C
     MP157D
     MP157F
+    U031C6
+    U031C8
+    U031F4
+    U031F6
+    U031F8
+    U031G6
+    U031G8
+    U031K4
+    U031K8
+    U031R6
+    U031R8
+    U073CC
+    U073HC
+    U073KC
+    U073MC
+    U073RC
+    U083CC
+    U083HC
+    U083KC
+    U083MC
+    U083RC    
     U575CG
     U575CI
     U585CI

cmake/stm32/u0.cmake

@@ -0,0 +1,29 @@
+set(STM32_U0_TYPES
+    U031xx
+    U073xC
+    U083xC
+)
+set(STM32_U0_TYPE_MATCH 
+    "U031.."
+    "U073.."
+    "U083.."
+)
+set(STM32_U0_RAM_SIZES 
+    12K
+    40K
+    40K
+)
+set(STM32_U0_CCRAM_SIZES 
+     0K
+     0K
+     0K
+)
+
+stm32_util_create_family_targets(U0)
+
+target_compile_options(STM32::U0 INTERFACE 
+    -mcpu=cortex-m0plus
+)
+target_link_options(STM32::U0 INTERFACE 
+    -mcpu=cortex-m0plus
+)

cmake/stm32/utilities.cmake

@@ -43,11 +43,11 @@ endfunction()
 include(FetchContent)
 
 # A CMSIS or HAL driver can specify 'cube' as version number to indicate that the driver is taken from the Cube repository
-set(STM32_FETCH_FAMILIES       C0     F0      F1      F2      F3      F4       F7      G0      G4      H5      H7       L0      L1      L4      L5     MP1    U5     WB      WL    )
-set(STM32_FETCH_CUBE_VERSIONS  v1.1.0 v1.11.2 v1.8.4  v1.9.3  v1.11.2 v1.26.1  v1.16.1 v1.4.1  v1.4.0  v1.1.0  v1.9.0   v1.12.0 v1.10.3 v1.17.0 v1.4.0 1.5.0  v1.4.0 v1.12.0 v1.1.0)
-set(STM32_FETCH_CMSIS_VERSIONS v1.1.0 v2.3.5  v4.3.3  v2.2.5  v2.3.5  v2.6.6   v1.2.6  v1.4.0  v1.2.1  v1.1.0  v1.10.0  v1.9.1  v2.3.2  v1.7.1  v1.0.4 cube  v1.3.1 v1.9.0  v1.1.0)
+set(STM32_FETCH_FAMILIES       C0     F0      F1      F2      F3      F4      F7      G0     G4     H5     H7      L0      L1      L4      L5     MP1   U0     U5     WB      WL    )
+set(STM32_FETCH_CUBE_VERSIONS  v1.1.0 v1.11.2 v1.8.4  v1.9.3  v1.11.2 v1.26.1 v1.16.1 v1.4.1 v1.4.0 v1.1.0 v1.9.0  v1.12.0 v1.10.3 v1.17.0 v1.4.0 1.5.0 v1.0.0 v1.4.0 v1.12.0 v1.1.0)
+set(STM32_FETCH_CMSIS_VERSIONS v1.1.0 v2.3.5  v4.3.3  v2.2.5  v2.3.5  v2.6.6  v1.2.6  v1.4.0 v1.2.1 v1.1.0 v1.10.0 v1.9.1  v2.3.2  v1.7.1  v1.0.4 cube  v1.0.0 v1.3.1 v1.9.0  v1.1.0)
 
-set(STM32_FETCH_HAL_VERSIONS   v1.1.0 v1.7.5  v1.1.8  v1.2.7  v1.5.5  v1.7.12  v1.2.9  v1.4.1  v1.2.1  v1.1.0  v1.10.0  v1.10.4 v1.4.4  v1.13.0 v1.0.4 cube  v1.4.0 v1.9.0  v1.1.0)
+set(STM32_FETCH_HAL_VERSIONS   v1.1.0 v1.7.5  v1.1.8  v1.2.7  v1.5.5  v1.7.12 v1.2.9  v1.4.1 v1.2.1 v1.1.0 v1.10.0 v1.10.4 v1.4.4  v1.13.0 v1.0.4 cube  v1.0.0 v1.4.0 v1.9.0  v1.1.0)
 
 
 

tests/bsp/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.16)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U5 WB WL)
+    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U0 U5 WB WL)
 endif()
 
 # Nucleo boards can have different devices on it
@@ -28,6 +28,8 @@ set(DEVICE_STM32L4xx_Nucleo_32 L412KB)
 set(DEVICE_STM32L4xx_Nucleo_144 L496ZG)
 set(DEVICE_STM32MP15xx_DISCO MP157CAC)
 set(DEVICE_STM32MP15xx_EVAL MP157FAA)
+set(DEVICE_STM32U0xx_Nucleo U031R8)
+set(DEVICE_STM32U0xx_DISCO U083CC)
 set(DEFINES_STM32469I_EVAL USE_IOEXPANDER)
 set(DEFINES_STM32F769I_EVAL USE_IOEXPANDER) 
 set(DEFINES_STM32L476G_EVAL USE_IOEXPANDER) 

tests/bsp/stm32u0xx_hal_conf.h

@@ -0,0 +1,335 @@
+/**
+  ******************************************************************************
+  * @file    stm32u0xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32U0xx_HAL_CONF_H
+#define __STM32U0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRS_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LCD_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE              4000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+  #define MSI_VALUE              4000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+ * @brief Internal Multiple Speed oscillator (MSI) default value.
+ *        This value is the default MSI range value after Reset.
+ */
+#if !defined  (MSI32_VALUE)
+#define MSI32_VALUE            32000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI32_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE              16000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG.
+  *        This internal oscillator is mainly dedicated to provide a high precision clock to
+  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+  *        which is subject to manufacturing process variations.
+  */
+#if !defined  (HSI48_VALUE)
+  #define HSI48_VALUE             48000000U /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz.
+                                               The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+  #define LSI_VALUE  32000U     /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+                                                The real value may vary depending on the variations
+                                                in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE              32768U    /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            (3U)    /*!< tick interrupt priority (lowest by default) */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Register callback feature configuration ############### */
+/**
+  * @brief Set below the peripheral configuration  to "1U" to add the support
+  *        of HAL callback registration/unregistration feature for the HAL
+  *        driver(s). This allows user application to provide specific callback
+  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
+  *        the default weak callback functions (see each stm32n6xx_hal_ppp.h file
+  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
+  *        for each PPP peripheral).
+  */
+#define  USE_HAL_ADC_REGISTER_CALLBACKS        0U /* ADC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS       0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS        0U /* DAC register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS        0U /* I2C register callback disabled       */
+#define  USE_HAL_IWDG_REGISTER_CALLBACKS       0U /* IWDG register callback disabled      */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS       0U /* IRDA register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS      0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LCD_REGISTER_CALLBACKS        0U /* LCD register callback disabled      */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS        0U /* PCD register callback disabled       */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS        0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS        0U /* RTC register callback disabled       */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS        0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS        0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS       0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS      0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS       0U /* WWDG register callback disabled      */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32u0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32u0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32u0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32u0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32u0xx_hal_adc.h"
+#include "stm32u0xx_hal_adc_ex.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+#include "stm32u0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32u0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRS_MODULE_ENABLED
+#include "stm32u0xx_ll_crs.h"
+#endif /* HAL_CRS_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+#include "stm32u0xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32u0xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32u0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32u0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32u0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32u0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32u0xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+#include "stm32u0xx_hal_lcd.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+#include "stm32u0xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32u0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+#include "stm32u0xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32u0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32u0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32u0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+#include "stm32u0xx_ll_system.h"
+#include "stm32u0xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32u0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32u0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32u0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32u0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32u0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+#include "stm32u0xx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32u0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t *file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32U0xx_HAL_CONF_H */

tests/cmsis/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.16)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 U5 WB WL)
+    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 U0 U5 WB WL)
 endif()
 
 if("MP1" IN_LIST TEST_FAMILIES)

tests/fetch/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.16)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U5 WB WL)
+    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U0 U5 WB WL)
 endif()
 
 # Generate the family long names list by prepending STM32 to elements in TEST_FAMILIES

tests/fetch/stm32u0xx_hal_conf.h

@@ -0,0 +1,335 @@
+/**
+  ******************************************************************************
+  * @file    stm32u0xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32U0xx_HAL_CONF_H
+#define __STM32U0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRS_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LCD_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE              4000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+  #define MSI_VALUE              4000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+ * @brief Internal Multiple Speed oscillator (MSI) default value.
+ *        This value is the default MSI range value after Reset.
+ */
+#if !defined  (MSI32_VALUE)
+#define MSI32_VALUE            32000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI32_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE              16000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG.
+  *        This internal oscillator is mainly dedicated to provide a high precision clock to
+  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+  *        which is subject to manufacturing process variations.
+  */
+#if !defined  (HSI48_VALUE)
+  #define HSI48_VALUE             48000000U /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz.
+                                               The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+  #define LSI_VALUE  32000U     /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+                                                The real value may vary depending on the variations
+                                                in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE              32768U    /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            (3U)    /*!< tick interrupt priority (lowest by default) */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Register callback feature configuration ############### */
+/**
+  * @brief Set below the peripheral configuration  to "1U" to add the support
+  *        of HAL callback registration/unregistration feature for the HAL
+  *        driver(s). This allows user application to provide specific callback
+  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
+  *        the default weak callback functions (see each stm32n6xx_hal_ppp.h file
+  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
+  *        for each PPP peripheral).
+  */
+#define  USE_HAL_ADC_REGISTER_CALLBACKS        0U /* ADC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS       0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS        0U /* DAC register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS        0U /* I2C register callback disabled       */
+#define  USE_HAL_IWDG_REGISTER_CALLBACKS       0U /* IWDG register callback disabled      */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS       0U /* IRDA register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS      0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LCD_REGISTER_CALLBACKS        0U /* LCD register callback disabled      */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS        0U /* PCD register callback disabled       */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS        0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS        0U /* RTC register callback disabled       */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS        0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS        0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS       0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS      0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS       0U /* WWDG register callback disabled      */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32u0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32u0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32u0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32u0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32u0xx_hal_adc.h"
+#include "stm32u0xx_hal_adc_ex.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+#include "stm32u0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32u0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRS_MODULE_ENABLED
+#include "stm32u0xx_ll_crs.h"
+#endif /* HAL_CRS_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+#include "stm32u0xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32u0xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32u0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32u0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32u0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32u0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32u0xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+#include "stm32u0xx_hal_lcd.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+#include "stm32u0xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32u0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+#include "stm32u0xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32u0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32u0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32u0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+#include "stm32u0xx_ll_system.h"
+#include "stm32u0xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32u0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32u0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32u0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32u0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32u0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+#include "stm32u0xx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32u0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t *file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32U0xx_HAL_CONF_H */

tests/hal/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.16)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U5 WB WL)
+    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U0 U5 WB WL)
 endif()
 
 # Generate the family long names list by prepending STM32 to elements in TEST_FAMILIES

tests/hal/stm32u0xx_hal_conf.h

@@ -0,0 +1,335 @@
+/**
+  ******************************************************************************
+  * @file    stm32u0xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2023 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32U0xx_HAL_CONF_H
+#define __STM32U0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRS_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LCD_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE              4000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+  #define MSI_VALUE              4000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+ * @brief Internal Multiple Speed oscillator (MSI) default value.
+ *        This value is the default MSI range value after Reset.
+ */
+#if !defined  (MSI32_VALUE)
+#define MSI32_VALUE            32000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI32_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE              16000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG.
+  *        This internal oscillator is mainly dedicated to provide a high precision clock to
+  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+  *        which is subject to manufacturing process variations.
+  */
+#if !defined  (HSI48_VALUE)
+  #define HSI48_VALUE             48000000U /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz.
+                                               The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+  #define LSI_VALUE  32000U     /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+                                                The real value may vary depending on the variations
+                                                in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE              32768U    /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            (3U)    /*!< tick interrupt priority (lowest by default) */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Register callback feature configuration ############### */
+/**
+  * @brief Set below the peripheral configuration  to "1U" to add the support
+  *        of HAL callback registration/unregistration feature for the HAL
+  *        driver(s). This allows user application to provide specific callback
+  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
+  *        the default weak callback functions (see each stm32n6xx_hal_ppp.h file
+  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
+  *        for each PPP peripheral).
+  */
+#define  USE_HAL_ADC_REGISTER_CALLBACKS        0U /* ADC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS       0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS        0U /* DAC register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS        0U /* I2C register callback disabled       */
+#define  USE_HAL_IWDG_REGISTER_CALLBACKS       0U /* IWDG register callback disabled      */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS       0U /* IRDA register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS      0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LCD_REGISTER_CALLBACKS        0U /* LCD register callback disabled      */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS        0U /* PCD register callback disabled       */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS        0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS        0U /* RTC register callback disabled       */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS        0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS        0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS       0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS      0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS       0U /* WWDG register callback disabled      */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32u0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32u0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32u0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32u0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32u0xx_hal_adc.h"
+#include "stm32u0xx_hal_adc_ex.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+#include "stm32u0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32u0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRS_MODULE_ENABLED
+#include "stm32u0xx_ll_crs.h"
+#endif /* HAL_CRS_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+#include "stm32u0xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32u0xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32u0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32u0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32u0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32u0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32u0xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+#include "stm32u0xx_hal_lcd.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+#include "stm32u0xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32u0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+#include "stm32u0xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32u0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32u0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32u0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+#include "stm32u0xx_ll_system.h"
+#include "stm32u0xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32u0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32u0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32u0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32u0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32u0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+#include "stm32u0xx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32u0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t *file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32U0xx_HAL_CONF_H */