F2 F3 deprecate (#267)

* move f3-1 to f4, remove f3
* remove f2
* remove firmware F3 for pipeline
* remove patch for F4 makefile
* fix fw makefile
* migrate bootloader to f4

.github/workflows/ci.yml

@@ -29,22 +29,6 @@ jobs:
         with:
           run: /syntax_check.sh
 
-      - name: Build F2 bootloader in docker
-        uses: ./.github/actions/docker
-        with:
-          run: make -C bootloader TARGET=f2
-
-      - name: Publish F2 bootloader artifacts
-        uses: actions/upload-artifact@v2
-        with:
-          name: bootloader_f2
-          path: |
-            bootloader/.obj/f2/bootloader.elf
-            bootloader/.obj/f2/bootloader.bin
-            bootloader/.obj/f2/bootloader.hex
-          if-no-files-found: error
-          retention-days: 7
-
       - name: Build local testing firmware in docker
         uses: ./.github/actions/docker
         with:
@@ -55,51 +39,35 @@ jobs:
         with:
           run: make -C firmware TARGET=local APP_TEST=1 run
 
-      - name: Build F2 firmware in docker
-        uses: ./.github/actions/docker
-        with:
-          run: make -C firmware TARGET=f2 APP_RELEASE=1
-
-      - name: Publish F2 firmware artifacts
-        uses: actions/upload-artifact@v2
-        with:
-          name: firmware_f2
-          path: |
-            firmware/.obj/f2/firmware.elf
-            firmware/.obj/f2/firmware.bin
-            firmware/.obj/f2/firmware.hex
-          if-no-files-found: error
-          retention-days: 7
-
-      - name: Build F3 bootloader in docker
+      - name: Build F4 bootloader in docker
         uses: ./.github/actions/docker
         with:
-          run: make -C bootloader TARGET=f3
+          run: make -C bootloader TARGET=f4
 
-      - name: Publish F3 bootloader artifacts
+      - name: Publish F4 bootloader artifacts
         uses: actions/upload-artifact@v2
         with:
-          name: bootloader_f3
+          name: bootloader_f4
           path: |
-            bootloader/.obj/f3/bootloader.elf
-            bootloader/.obj/f3/bootloader.bin
-            bootloader/.obj/f3/bootloader.hex
+            bootloader/.obj/f4/bootloader.elf
+            bootloader/.obj/f4/bootloader.bin
+            bootloader/.obj/f4/bootloader.hex
           if-no-files-found: error
           retention-days: 7
 
-      - name: Build F3 firmware in docker
+      - name: Build F4 firmware in docker
         uses: ./.github/actions/docker
         with:
-          run: make -C firmware TARGET=f3 APP_RELEASE=1
+          run: make -C firmware TARGET=f4 APP_RELEASE=1
 
-      - name: Publish F3 firmware artifacts
+      - name: Publish F4 firmware artifacts
         uses: actions/upload-artifact@v2
         with:
-          name: firmware_f3
+          name: firmware_f4
           path: |
-            firmware/.obj/f3/firmware.elf
-            firmware/.obj/f3/firmware.bin
-            firmware/.obj/f3/firmware.hex
+            firmware/.obj/f4/firmware.elf
+            firmware/.obj/f4/firmware.bin
+            firmware/.obj/f4/firmware.hex
           if-no-files-found: error
           retention-days: 7
 
@@ -111,12 +79,12 @@ jobs:
       - name: Get bootloader
         uses: actions/download-artifact@v2
         with:
-          name: bootloader_f3
+          name: bootloader_f4
           path: bootloader
       - name: Get firmware
         uses: actions/download-artifact@v2
         with:
-          name: firmware_f3
+          name: firmware_f4
           path: firmware
       - name: Upload bootloader
         uses: burnett01/rsync-deployments@4.1
@@ -148,12 +116,12 @@ jobs:
       - name: Get bootloader
         uses: actions/download-artifact@v2
         with:
-          name: bootloader_f3
+          name: bootloader_f4
           path: bootloader
       - name: Get firmware
         uses: actions/download-artifact@v2
         with:
-          name: firmware_f3
+          name: firmware_f4
           path: firmware 
       - name: cp 
         run: cp ./bootloader/bootloader.bin full_firmware_latest.bin

bootloader/Makefile

@@ -9,7 +9,7 @@ ASM_SOURCES		+= $(wildcard src/*.s)
 C_SOURCES		+= $(wildcard src/*.c)
 CPP_SOURCES		+= $(wildcard src/*.cpp)
 
-TARGET			?= f2
+TARGET			?= f4
 TARGET_DIR		= targets/$(TARGET)
 include			$(TARGET_DIR)/target.mk
 

bootloader/targets/f3/target.mk → bootloader/targets/f4/target.mk

@@ -22,7 +22,7 @@ CFLAGS			+= -I$(CUBE_DIR)/Drivers/CMSIS/Include
 CFLAGS			+= -I$(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32WBxx/Include
 CFLAGS			+= -I$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Inc
 
-LDFLAGS			+= -Ttargets/f3/stm32wb55xx_flash_cm4.ld
+LDFLAGS			+= -T$(TARGET_DIR)/stm32wb55xx_flash_cm4.ld
 
 ASM_SOURCES		+= $(wildcard $(TARGET_DIR)/*.s)
 C_SOURCES		+= $(wildcard $(TARGET_DIR)/*.c)

firmware/Makefile

@@ -11,14 +11,9 @@ include			$(PROJECT_ROOT)/make/git.mk
 include 		$(PROJECT_ROOT)/applications/applications.mk
 include			$(PROJECT_ROOT)/lib/lib.mk
 
-TARGET			?= f2
+TARGET			?= f4
 
-# TODO temporary for migrating f3.1 to f4
-ifeq ($(TARGET), f4)
-TARGET_DIR = targets/f3
-else
 TARGET_DIR		= targets/$(TARGET)
-endif
 
 include			$(TARGET_DIR)/target.mk
 CFLAGS			+= -Itargets/api-hal-include

firmware/targets/f2/Inc/FreeRTOSConfig.h

@@ -1,172 +0,0 @@
-/* USER CODE BEGIN Header */
-/*
- * FreeRTOS Kernel V10.2.1
- * Portion Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- * Portion Copyright (C) 2019 StMicroelectronics, Inc.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-/* USER CODE END Header */
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * These parameters and more are described within the 'configuration' section of the
- * FreeRTOS API documentation available on the FreeRTOS.org web site.
- *
- * See http://www.freertos.org/a00110.html
- *----------------------------------------------------------*/
-
-/* USER CODE BEGIN Includes */
-/* Section where include file can be added */
-/* USER CODE END Includes */
-
-/* Ensure definitions are only used by the compiler, and not by the assembler. */
-#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
-  #include <stdint.h>
-  extern uint32_t SystemCoreClock;
-/* USER CODE BEGIN 0 */
-  extern void configureTimerForRunTimeStats(void);
-  extern unsigned long getRunTimeCounterValue(void);
-/* USER CODE END 0 */
-#endif
-#define configENABLE_FPU                         0
-#define configENABLE_MPU                         0
-
-#define configUSE_PREEMPTION                     1
-#define configSUPPORT_STATIC_ALLOCATION          1
-#define configSUPPORT_DYNAMIC_ALLOCATION         1
-#define configUSE_IDLE_HOOK                      1
-#define configUSE_TICK_HOOK                      0
-#define configCPU_CLOCK_HZ                       ( SystemCoreClock )
-#define configTICK_RATE_HZ                       ((TickType_t)1000)
-#define configMAX_PRIORITIES                     ( 56 )
-#define configMINIMAL_STACK_SIZE                 ((uint16_t)128)
-#define configTOTAL_HEAP_SIZE                    ((size_t)40960)
-#define configMAX_TASK_NAME_LEN                  ( 16 )
-#define configGENERATE_RUN_TIME_STATS            1
-#define configUSE_TRACE_FACILITY                 1
-#define configUSE_16_BIT_TICKS                   0
-#define configUSE_MUTEXES                        1
-#define configQUEUE_REGISTRY_SIZE                8
-#define configCHECK_FOR_STACK_OVERFLOW           1
-#define configUSE_RECURSIVE_MUTEXES              1
-#define configUSE_COUNTING_SEMAPHORES            1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION  0
-#define configRECORD_STACK_HIGH_ADDRESS          1
-/* USER CODE BEGIN MESSAGE_BUFFER_LENGTH_TYPE */
-/* Defaults to size_t for backward compatibility, but can be changed
-   if lengths will always be less than the number of bytes in a size_t. */
-#define configMESSAGE_BUFFER_LENGTH_TYPE         size_t
-#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 1
-/* USER CODE END MESSAGE_BUFFER_LENGTH_TYPE */
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES                    0
-#define configMAX_CO_ROUTINE_PRIORITIES          ( 2 )
-
-/* Software timer definitions. */
-#define configUSE_TIMERS                         1
-#define configTIMER_TASK_PRIORITY                ( 2 )
-#define configTIMER_QUEUE_LENGTH                 10
-#define configTIMER_TASK_STACK_DEPTH             256
-
-/* Set the following definitions to 1 to include the API function, or zero
-to exclude the API function. */
-#define INCLUDE_vTaskPrioritySet             1
-#define INCLUDE_uxTaskPriorityGet            1
-#define INCLUDE_vTaskDelete                  1
-#define INCLUDE_vTaskCleanUpResources        0
-#define INCLUDE_vTaskSuspend                 1
-#define INCLUDE_vTaskDelayUntil              1
-#define INCLUDE_vTaskDelay                   1
-#define INCLUDE_xTaskGetSchedulerState       1
-#define INCLUDE_xTimerPendFunctionCall       1
-#define INCLUDE_xQueueGetMutexHolder         1
-#define INCLUDE_uxTaskGetStackHighWaterMark  1
-#define INCLUDE_eTaskGetState                1
-
-/*
- * The CMSIS-RTOS V2 FreeRTOS wrapper is dependent on the heap implementation used
- * by the application thus the correct define need to be enabled below
- */
-#define USE_FreeRTOS_HEAP_4
-
-/* Cortex-M specific definitions. */
-#ifdef __NVIC_PRIO_BITS
- /* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
- #define configPRIO_BITS         __NVIC_PRIO_BITS
-#else
- #define configPRIO_BITS         4
-#endif
-
-/* The lowest interrupt priority that can be used in a call to a "set priority"
-function. */
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY   15
-
-/* The highest interrupt priority that can be used by any interrupt service
-routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
-INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
-PRIORITY THAN THIS! (higher priorities are lower numeric values. */
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
-
-/* Interrupt priorities used by the kernel port layer itself.  These are generic
-to all Cortex-M ports, and do not rely on any particular library functions. */
-#define configKERNEL_INTERRUPT_PRIORITY 		( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
-See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-/* Normal assert() semantics without relying on the provision of an assert.h
-header file. */
-/* USER CODE BEGIN 1 */
-#define configASSERT( x ) if ((x) == 0) {taskDISABLE_INTERRUPTS(); for( ;; );}
-/* USER CODE END 1 */
-
-/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
-standard names. */
-#define vPortSVCHandler    SVC_Handler
-#define xPortPendSVHandler PendSV_Handler
-
-/* IMPORTANT: This define is commented when used with STM32Cube firmware, when the timebase source is SysTick,
-              to prevent overwriting SysTick_Handler defined within STM32Cube HAL */
-
-#define xPortSysTickHandler SysTick_Handler
-
-/* USER CODE BEGIN 2 */
-/* Definitions needed when configGENERATE_RUN_TIME_STATS is on */
-#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS configureTimerForRunTimeStats
-#define portGET_RUN_TIME_COUNTER_VALUE getRunTimeCounterValue
-/* USER CODE END 2 */
-
-/* USER CODE BEGIN Defines */
-/* Section where parameter definitions can be added (for instance, to override default ones in FreeRTOS.h) */
-/* USER CODE END Defines */
-
-#endif /* FREERTOS_CONFIG_H */

firmware/targets/f2/Inc/adc.h

@@ -1,58 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : ADC.h
-  * Description        : This file provides code for the configuration
-  *                      of the ADC instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __adc_H
-#define __adc_H
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern ADC_HandleTypeDef hadc1;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_ADC1_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*__ adc_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/comp.h

@@ -1,58 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : COMP.h
-  * Description        : This file provides code for the configuration
-  *                      of the COMP instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __comp_H
-#define __comp_H
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern COMP_HandleTypeDef hcomp1;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_COMP1_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*__ comp_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/gpio.h

@@ -1,57 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : gpio.h
-  * Description        : This file contains all the functions prototypes for
-  *                      the gpio
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __gpio_H
-#define __gpio_H
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_GPIO_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*__ pinoutConfig_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/main.h

@@ -1,166 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : main.h
-  * @brief          : Header for main.c file.
-  *                   This file contains the common defines of the application.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __MAIN_H
-#define __MAIN_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l4xx_hal.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-/* Exported functions prototypes ---------------------------------------------*/
-void Error_Handler(void);
-
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-/* Private defines -----------------------------------------------------------*/
-#define BUTTON_BACK_Pin GPIO_PIN_13
-#define BUTTON_BACK_GPIO_Port GPIOC
-#define BUTTON_BACK_EXTI_IRQn EXTI15_10_IRQn
-#define CHRG_Pin GPIO_PIN_2
-#define CHRG_GPIO_Port GPIOC
-#define CHRG_EXTI_IRQn EXTI2_IRQn
-#define BATT_V_Pin GPIO_PIN_3
-#define BATT_V_GPIO_Port GPIOC
-#define IR_RX_Pin GPIO_PIN_0
-#define IR_RX_GPIO_Port GPIOA
-#define BUTTON_DOWN_Pin GPIO_PIN_1
-#define BUTTON_DOWN_GPIO_Port GPIOA
-#define BUTTON_DOWN_EXTI_IRQn EXTI1_IRQn
-#define DISPLAY_DI_Pin GPIO_PIN_2
-#define DISPLAY_DI_GPIO_Port GPIOA
-#define SPEAKER_Pin GPIO_PIN_3
-#define SPEAKER_GPIO_Port GPIOA
-#define NFC_CS_Pin GPIO_PIN_4
-#define NFC_CS_GPIO_Port GPIOC
-#define RFID_RF_IN_Pin GPIO_PIN_5
-#define RFID_RF_IN_GPIO_Port GPIOC
-#define BUTTON_UP_Pin GPIO_PIN_0
-#define BUTTON_UP_GPIO_Port GPIOB
-#define BUTTON_UP_EXTI_IRQn EXTI0_IRQn
-#define LED_BLUE_Pin GPIO_PIN_1
-#define LED_BLUE_GPIO_Port GPIOB
-#define DISPLAY_RST_Pin GPIO_PIN_10
-#define DISPLAY_RST_GPIO_Port GPIOB
-#define IR_TX_Pin GPIO_PIN_11
-#define IR_TX_GPIO_Port GPIOB
-#define RFID_OUT_Pin GPIO_PIN_13
-#define RFID_OUT_GPIO_Port GPIOB
-#define LED_GREEN_Pin GPIO_PIN_14
-#define LED_GREEN_GPIO_Port GPIOB
-#define RFID_PULL_Pin GPIO_PIN_15
-#define RFID_PULL_GPIO_Port GPIOB
-#define RFID_PULL_EXTI_IRQn EXTI15_10_IRQn
-#define VIBRO_Pin GPIO_PIN_6
-#define VIBRO_GPIO_Port GPIOC
-#define iButton_Pin GPIO_PIN_7
-#define iButton_GPIO_Port GPIOC
-#define DISPLAY_CS_Pin GPIO_PIN_8
-#define DISPLAY_CS_GPIO_Port GPIOC
-#define SD_CS_Pin GPIO_PIN_9
-#define SD_CS_GPIO_Port GPIOC
-#define LED_RED_Pin GPIO_PIN_8
-#define LED_RED_GPIO_Port GPIOA
-#define TMS_Pin GPIO_PIN_13
-#define TMS_GPIO_Port GPIOA
-#define TCK_Pin GPIO_PIN_14
-#define TCK_GPIO_Port GPIOA
-#define CC1101_CS_Pin GPIO_PIN_15
-#define CC1101_CS_GPIO_Port GPIOA
-#define BUTTON_LEFT_Pin GPIO_PIN_4
-#define BUTTON_LEFT_GPIO_Port GPIOB
-#define BUTTON_LEFT_EXTI_IRQn EXTI4_IRQn
-#define DISPLAY_BACKLIGHT_Pin GPIO_PIN_6
-#define DISPLAY_BACKLIGHT_GPIO_Port GPIOB
-#define CC1101_G0_Pin GPIO_PIN_7
-#define CC1101_G0_GPIO_Port GPIOB
-#define BUTTON_RIGHT_Pin GPIO_PIN_8
-#define BUTTON_RIGHT_GPIO_Port GPIOB
-#define BUTTON_RIGHT_EXTI_IRQn EXTI9_5_IRQn
-#define BUTTON_OK_Pin GPIO_PIN_9
-#define BUTTON_OK_GPIO_Port GPIOB
-#define BUTTON_OK_EXTI_IRQn EXTI9_5_IRQn
-/* USER CODE BEGIN Private defines */
-
-#define MISO_PIN GpioPin{.port = GPIOC, .pin = GPIO_PIN_11}
-
-#define SPI_R hspi3
-#define SPI_D hspi1
-#define SPI_SD_HANDLE SPI_R
-
-extern TIM_HandleTypeDef htim2;
-extern TIM_HandleTypeDef htim5;
-extern TIM_HandleTypeDef htim15;
-
-#define TIM_A htim2
-#define TIM_B htim5
-#define TIM_C htim15
-
-#define SPEAKER_TIM htim5
-#define SPEAKER_CH TIM_CHANNEL_4
-
-#define LFRFID_TIM htim15
-#define LFRFID_CH TIM_CHANNEL_1
-
-#define IRDA_TX_TIM htim2
-#define IRDA_TX_CH TIM_CHANNEL_3
-
-#define NFC_IRQ_Pin RFID_PULL_Pin
-#define NFC_IRQ_GPIO_Port RFID_PULL_GPIO_Port
-
-#define VIBRO_Pin GPIO_PIN_6
-#define VIBRO_GPIO_Port GPIOC
-
-/* USER CODE END Private defines */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __MAIN_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/rtc.h

@@ -1,58 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : RTC.h
-  * Description        : This file provides code for the configuration
-  *                      of the RTC instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __rtc_H
-#define __rtc_H
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern RTC_HandleTypeDef hrtc;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_RTC_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*__ rtc_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/spi.h

@@ -1,63 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : SPI.h
-  * Description        : This file provides code for the configuration
-  *                      of the SPI instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __spi_H
-#define __spi_H
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern SPI_HandleTypeDef hspi1;
-extern SPI_HandleTypeDef hspi3;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_SPI1_Init(void);
-void MX_SPI3_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-void NFC_SPI_Reconfigure();
-void SD_SPI_Reconfigure_Slow();
-void SD_SPI_Reconfigure_Fast();
-void CC1101_SPI_Reconfigure();
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*__ spi_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/stm32l4xx_hal_conf.h

@@ -1,483 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32l4xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration template file.
-  *          This file should be copied to the application folder and renamed
-  *          to stm32l4xx_hal_conf.h.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32L4xx_HAL_CONF_H
-#define STM32L4xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-#define HAL_ADC_MODULE_ENABLED
-/*#define HAL_CRYP_MODULE_ENABLED   */
-/*#define HAL_CAN_MODULE_ENABLED   */
-#define HAL_COMP_MODULE_ENABLED
-/*#define HAL_CRC_MODULE_ENABLED   */
-/*#define HAL_CRYP_MODULE_ENABLED   */
-/*#define HAL_DAC_MODULE_ENABLED   */
-/*#define HAL_DCMI_MODULE_ENABLED   */
-/*#define HAL_DMA2D_MODULE_ENABLED   */
-/*#define HAL_DFSDM_MODULE_ENABLED   */
-/*#define HAL_DSI_MODULE_ENABLED   */
-/*#define HAL_FIREWALL_MODULE_ENABLED   */
-/*#define HAL_GFXMMU_MODULE_ENABLED   */
-/*#define HAL_HCD_MODULE_ENABLED   */
-/*#define HAL_HASH_MODULE_ENABLED   */
-/*#define HAL_I2S_MODULE_ENABLED   */
-/*#define HAL_IRDA_MODULE_ENABLED   */
-/*#define HAL_IWDG_MODULE_ENABLED   */
-/*#define HAL_LTDC_MODULE_ENABLED   */
-/*#define HAL_LCD_MODULE_ENABLED   */
-/*#define HAL_LPTIM_MODULE_ENABLED   */
-/*#define HAL_MMC_MODULE_ENABLED   */
-/*#define HAL_NAND_MODULE_ENABLED   */
-/*#define HAL_NOR_MODULE_ENABLED   */
-/*#define HAL_OPAMP_MODULE_ENABLED   */
-/*#define HAL_OSPI_MODULE_ENABLED   */
-/*#define HAL_OSPI_MODULE_ENABLED   */
-#define HAL_PCD_MODULE_ENABLED
-/*#define HAL_PKA_MODULE_ENABLED   */
-/*#define HAL_QSPI_MODULE_ENABLED   */
-/*#define HAL_QSPI_MODULE_ENABLED   */
-/*#define HAL_RNG_MODULE_ENABLED   */
-#define HAL_RTC_MODULE_ENABLED
-/*#define HAL_SAI_MODULE_ENABLED   */
-/*#define HAL_SD_MODULE_ENABLED   */
-/*#define HAL_SMBUS_MODULE_ENABLED   */
-/*#define HAL_SMARTCARD_MODULE_ENABLED   */
-#define HAL_SPI_MODULE_ENABLED
-/*#define HAL_SRAM_MODULE_ENABLED   */
-/*#define HAL_SWPMI_MODULE_ENABLED   */
-#define HAL_TIM_MODULE_ENABLED
-/*#define HAL_TSC_MODULE_ENABLED   */
-#define HAL_UART_MODULE_ENABLED
-/*#define HAL_USART_MODULE_ENABLED   */
-/*#define HAL_WWDG_MODULE_ENABLED   */
-/*#define HAL_EXTI_MODULE_ENABLED   */
-/*#define HAL_PSSI_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_EXTI_MODULE_ENABLED
-#define HAL_I2C_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-
-/* ########################## Oscillator Values adaptation ####################*/
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)16000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal Multiple Speed oscillator (MSI) default value.
-  *        This value is the default MSI range value after Reset.
-  */
-#if !defined  (MSI_VALUE)
-  #define MSI_VALUE    ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* MSI_VALUE */
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
-  *        This internal oscillator is mainly dedicated to provide a high precision clock to
-  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
-  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
-  *        which is subject to manufacturing process variations.
-  */
-#if !defined  (HSI48_VALUE)
- #define HSI48_VALUE   ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
-                                              The real value my vary depending on manufacturing process variations.*/
-#endif /* HSI48_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  32000U       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.*/
-
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  *        This value is used by the UART, RTC HAL module to compute the system frequency
-  */
-#if !defined  (LSE_VALUE)
-  #define LSE_VALUE    32768U /*!< Value of the External oscillator in Hz*/
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for SAI1 peripheral
-  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
-  *        frequency.
-  */
-#if !defined  (EXTERNAL_SAI1_CLOCK_VALUE)
-  #define EXTERNAL_SAI1_CLOCK_VALUE    2097000U /*!< Value of the SAI1 External clock source in Hz*/
-#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
-
-/**
-  * @brief External clock source for SAI2 peripheral
-  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
-  *        frequency.
-  */
-#if !defined  (EXTERNAL_SAI2_CLOCK_VALUE)
-  #define EXTERNAL_SAI2_CLOCK_VALUE    2097000U /*!< Value of the SAI2 External clock source in Hz*/
-#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-
-#define  VDD_VALUE					  3300U /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            0U    /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## Register callback feature configuration ############### */
-/**
-  * @brief Set below the peripheral configuration  to "1U" to add the support
-  *        of HAL callback registration/deregistration feature for the HAL
-  *        driver(s). This allows user application to provide specific callback
-  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
-  *        the default weak callback functions (see each stm32l4xx_hal_ppp.h file
-  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
-  *        for each PPP peripheral).
-  */
-#define USE_HAL_ADC_REGISTER_CALLBACKS        0U
-#define USE_HAL_CAN_REGISTER_CALLBACKS        0U
-#define USE_HAL_COMP_REGISTER_CALLBACKS       0U
-#define USE_HAL_CRYP_REGISTER_CALLBACKS       0U
-#define USE_HAL_DAC_REGISTER_CALLBACKS        0U
-#define USE_HAL_DCMI_REGISTER_CALLBACKS       0U
-#define USE_HAL_DFSDM_REGISTER_CALLBACKS      0U
-#define USE_HAL_DMA2D_REGISTER_CALLBACKS      0U
-#define USE_HAL_DSI_REGISTER_CALLBACKS        0U
-#define USE_HAL_GFXMMU_REGISTER_CALLBACKS     0U
-#define USE_HAL_HASH_REGISTER_CALLBACKS       0U
-#define USE_HAL_HCD_REGISTER_CALLBACKS        0U
-#define USE_HAL_I2C_REGISTER_CALLBACKS        0U
-#define USE_HAL_IRDA_REGISTER_CALLBACKS       0U
-#define USE_HAL_LPTIM_REGISTER_CALLBACKS      0U
-#define USE_HAL_LTDC_REGISTER_CALLBACKS       0U
-#define USE_HAL_MMC_REGISTER_CALLBACKS        0U
-#define USE_HAL_OPAMP_REGISTER_CALLBACKS      0U
-#define USE_HAL_OSPI_REGISTER_CALLBACKS       0U
-#define USE_HAL_PCD_REGISTER_CALLBACKS        0U
-#define USE_HAL_QSPI_REGISTER_CALLBACKS       0U
-#define USE_HAL_RNG_REGISTER_CALLBACKS        0U
-#define USE_HAL_RTC_REGISTER_CALLBACKS        0U
-#define USE_HAL_SAI_REGISTER_CALLBACKS        0U
-#define USE_HAL_SD_REGISTER_CALLBACKS         0U
-#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U
-#define USE_HAL_SMBUS_REGISTER_CALLBACKS      0U
-#define USE_HAL_SPI_REGISTER_CALLBACKS        0U
-#define USE_HAL_SWPMI_REGISTER_CALLBACKS      0U
-#define USE_HAL_TIM_REGISTER_CALLBACKS        0U
-#define USE_HAL_TSC_REGISTER_CALLBACKS        0U
-#define USE_HAL_UART_REGISTER_CALLBACKS       0U
-#define USE_HAL_USART_REGISTER_CALLBACKS      0U
-#define USE_HAL_WWDG_REGISTER_CALLBACKS       0U
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
- * Activated: CRC code is present inside driver
- * Deactivated: CRC code cleaned from driver
- */
-
-#define USE_SPI_CRC                   0U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32l4xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32l4xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32l4xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
-  #include "stm32l4xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32l4xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32l4xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32l4xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "Legacy/stm32l4xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_COMP_MODULE_ENABLED
-  #include "stm32l4xx_hal_comp.h"
-#endif /* HAL_COMP_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32l4xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32l4xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32l4xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32l4xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32l4xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
-  #include "stm32l4xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32l4xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_GFXMMU_MODULE_ENABLED
-  #include "stm32l4xx_hal_gfxmmu.h"
-#endif /* HAL_GFXMMU_MODULE_ENABLED */
-
-#ifdef HAL_FIREWALL_MODULE_ENABLED
-  #include "stm32l4xx_hal_firewall.h"
-#endif /* HAL_FIREWALL_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32l4xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
-  #include "stm32l4xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
-  #include "stm32l4xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
-  #include "stm32l4xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
-  #include "stm32l4xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
-  #include "stm32l4xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LCD_MODULE_ENABLED
-  #include "stm32l4xx_hal_lcd.h"
-#endif /* HAL_LCD_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
-  #include "stm32l4xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
-  #include "stm32l4xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_MMC_MODULE_ENABLED
-  #include "stm32l4xx_hal_mmc.h"
-#endif /* HAL_MMC_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32l4xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32l4xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_OPAMP_MODULE_ENABLED
-  #include "stm32l4xx_hal_opamp.h"
-#endif /* HAL_OPAMP_MODULE_ENABLED */
-
-#ifdef HAL_OSPI_MODULE_ENABLED
-  #include "stm32l4xx_hal_ospi.h"
-#endif /* HAL_OSPI_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
-  #include "stm32l4xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_PKA_MODULE_ENABLED
-  #include "stm32l4xx_hal_pka.h"
-#endif /* HAL_PKA_MODULE_ENABLED */
-
-#ifdef HAL_PSSI_MODULE_ENABLED
-  #include "stm32l4xx_hal_pssi.h"
-#endif /* HAL_PSSI_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
-  #include "stm32l4xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
-  #include "stm32l4xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
-  #include "stm32l4xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
-  #include "stm32l4xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
-  #include "stm32l4xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
-  #include "stm32l4xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
-  #include "stm32l4xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
-  #include "stm32l4xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
-  #include "stm32l4xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32l4xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_SWPMI_MODULE_ENABLED
-  #include "stm32l4xx_hal_swpmi.h"
-#endif /* HAL_SWPMI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
-  #include "stm32l4xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_TSC_MODULE_ENABLED
-  #include "stm32l4xx_hal_tsc.h"
-#endif /* HAL_TSC_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
-  #include "stm32l4xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
-  #include "stm32l4xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
-  #include "stm32l4xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t *file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32L4xx_HAL_CONF_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/stm32l4xx_it.h

@@ -1,75 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32l4xx_it.h
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
- ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32L4xx_IT_H
-#define __STM32L4xx_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-/* Exported functions prototypes ---------------------------------------------*/
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void DebugMon_Handler(void);
-void EXTI0_IRQHandler(void);
-void EXTI1_IRQHandler(void);
-void EXTI2_IRQHandler(void);
-void EXTI4_IRQHandler(void);
-void EXTI9_5_IRQHandler(void);
-void TIM1_TRG_COM_TIM17_IRQHandler(void);
-void EXTI15_10_IRQHandler(void);
-void TIM8_CC_IRQHandler(void);
-void OTG_FS_IRQHandler(void);
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32L4xx_IT_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/tim.h

@@ -1,66 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : TIM.h
-  * Description        : This file provides code for the configuration
-  *                      of the TIM instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __tim_H
-#define __tim_H
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern TIM_HandleTypeDef htim2;
-extern TIM_HandleTypeDef htim5;
-extern TIM_HandleTypeDef htim8;
-extern TIM_HandleTypeDef htim15;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_TIM2_Init(void);
-void MX_TIM5_Init(void);
-void MX_TIM8_Init(void);
-void MX_TIM15_Init(void);
-
-void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*__ tim_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/usart.h

@@ -1,58 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : USART.h
-  * Description        : This file provides code for the configuration
-  *                      of the USART instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __usart_H
-#define __usart_H
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern UART_HandleTypeDef huart1;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_USART1_UART_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*__ usart_H */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/usb_device.h

@@ -1,105 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usb_device.h
-  * @version        : v2.0_Cube
-  * @brief          : Header for usb_device.c file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USB_DEVICE__H__
-#define __USB_DEVICE__H__
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l4xx.h"
-#include "stm32l4xx_hal.h"
-#include "usbd_def.h"
-
-/* USER CODE BEGIN INCLUDE */
-
-/* USER CODE END INCLUDE */
-
-/** @addtogroup USBD_OTG_DRIVER
-  * @{
-  */
-
-/** @defgroup USBD_DEVICE USBD_DEVICE
-  * @brief Device file for Usb otg low level driver.
-  * @{
-  */
-
-/** @defgroup USBD_DEVICE_Exported_Variables USBD_DEVICE_Exported_Variables
-  * @brief Public variables.
-  * @{
-  */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/*
- * -- Insert your variables declaration here --
- */
-/* USER CODE BEGIN VARIABLES */
-
-/* USER CODE END VARIABLES */
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DEVICE_Exported_FunctionsPrototype USBD_DEVICE_Exported_FunctionsPrototype
-  * @brief Declaration of public functions for Usb device.
-  * @{
-  */
-
-/** USB Device initialization function. */
-void MX_USB_DEVICE_Init(void);
-
-/*
- * -- Insert functions declaration here --
- */
-/* USER CODE BEGIN FD */
-
-/* USER CODE END FD */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USB_DEVICE__H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/usbd_cdc_if.h

@@ -1,134 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usbd_cdc_if.h
-  * @version        : v2.0_Cube
-  * @brief          : Header for usbd_cdc_if.c file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_CDC_IF_H__
-#define __USBD_CDC_IF_H__
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_cdc.h"
-
-/* USER CODE BEGIN INCLUDE */
-
-/* USER CODE END INCLUDE */
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
-  * @brief For Usb device.
-  * @{
-  */
-
-/** @defgroup USBD_CDC_IF USBD_CDC_IF
-  * @brief Usb VCP device module
-  * @{
-  */
-
-/** @defgroup USBD_CDC_IF_Exported_Defines USBD_CDC_IF_Exported_Defines
-  * @brief Defines.
-  * @{
-  */
-/* USER CODE BEGIN EXPORTED_DEFINES */
-/* Define size for the receive and transmit buffer over CDC */
-/* It's up to user to redefine and/or remove those define */
-#define APP_RX_DATA_SIZE  CDC_DATA_HS_MAX_PACKET_SIZE
-#define APP_TX_DATA_SIZE  CDC_DATA_HS_MAX_PACKET_SIZE
-
-/* USER CODE END EXPORTED_DEFINES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Exported_Types USBD_CDC_IF_Exported_Types
-  * @brief Types.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_TYPES */
-
-/* USER CODE END EXPORTED_TYPES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Exported_Macros USBD_CDC_IF_Exported_Macros
-  * @brief Aliases.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_MACRO */
-
-/* USER CODE END EXPORTED_MACRO */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
-  * @brief Public variables.
-  * @{
-  */
-
-/** CDC Interface callback. */
-extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS;
-
-/* USER CODE BEGIN EXPORTED_VARIABLES */
-
-/* USER CODE END EXPORTED_VARIABLES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype USBD_CDC_IF_Exported_FunctionsPrototype
-  * @brief Public functions declaration.
-  * @{
-  */
-
-uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len);
-
-/* USER CODE BEGIN EXPORTED_FUNCTIONS */
-
-/* USER CODE END EXPORTED_FUNCTIONS */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USBD_CDC_IF_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/usbd_conf.h

@@ -1,174 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usbd_conf.h
-  * @version        : v2.0_Cube
-  * @brief          : Header for usbd_conf.c file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_CONF__H__
-#define __USBD_CONF__H__
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "main.h"
-#include "stm32l4xx.h"
-#include "stm32l4xx_hal.h"
-
-/* USER CODE BEGIN INCLUDE */
-void *USBD_static_malloc(uint32_t size);
-void USBD_static_free(void* p);
-/* USER CODE END INCLUDE */
-
-/** @addtogroup USBD_OTG_DRIVER
-  * @brief Driver for Usb device.
-  * @{
-  */
-
-/** @defgroup USBD_CONF USBD_CONF
-  * @brief Configuration file for Usb otg low level driver.
-  * @{
-  */
-
-/** @defgroup USBD_CONF_Exported_Variables USBD_CONF_Exported_Variables
-  * @brief Public variables.
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CONF_Exported_Defines USBD_CONF_Exported_Defines
-  * @brief Defines for configuration of the Usb device.
-  * @{
-  */
-
-/*---------- -----------*/
-#define USBD_MAX_NUM_INTERFACES     1U
-/*---------- -----------*/
-#define USBD_MAX_NUM_CONFIGURATION     1U
-/*---------- -----------*/
-#define USBD_MAX_STR_DESC_SIZ     512U
-/*---------- -----------*/
-#define USBD_DEBUG_LEVEL     0U
-/*---------- -----------*/
-#define USBD_LPM_ENABLED     1U
-/*---------- -----------*/
-#define USBD_SELF_POWERED     1U
-
-/****************************************/
-/* #define for FS and HS identification */
-#define DEVICE_FS 		0
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CONF_Exported_Macros USBD_CONF_Exported_Macros
-  * @brief Aliases.
-  * @{
-  */
-
-/* Memory management macros */
-
-/** Alias for memory allocation. */
-#define USBD_malloc         USBD_static_malloc
-
-/** Alias for memory release. */
-#define USBD_free          USBD_static_free
-
-/** Alias for memory set. */
-#define USBD_memset         memset
-
-/** Alias for memory copy. */
-#define USBD_memcpy         memcpy
-
-/** Alias for delay. */
-#define USBD_Delay          HAL_Delay
-
-/* DEBUG macros */
-
-#if (USBD_DEBUG_LEVEL > 0)
-#define USBD_UsrLog(...)    printf(__VA_ARGS__);\
-                            printf("\n");
-#else
-#define USBD_UsrLog(...)
-#endif
-
-#if (USBD_DEBUG_LEVEL > 1)
-
-#define USBD_ErrLog(...)    printf("ERROR: ") ;\
-                            printf(__VA_ARGS__);\
-                            printf("\n");
-#else
-#define USBD_ErrLog(...)
-#endif
-
-#if (USBD_DEBUG_LEVEL > 2)
-#define USBD_DbgLog(...)    printf("DEBUG : ") ;\
-                            printf(__VA_ARGS__);\
-                            printf("\n");
-#else
-#define USBD_DbgLog(...)
-#endif
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CONF_Exported_Types USBD_CONF_Exported_Types
-  * @brief Types.
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CONF_Exported_FunctionsPrototype USBD_CONF_Exported_FunctionsPrototype
-  * @brief Declaration of public functions for Usb device.
-  * @{
-  */
-
-/* Exported functions -------------------------------------------------------*/
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USBD_CONF__H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Inc/usbd_desc.h

@@ -1,145 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usbd_desc.c
-  * @version        : v2.0_Cube
-  * @brief          : Header for usbd_conf.c file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_DESC__C__
-#define __USBD_DESC__C__
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_def.h"
-
-/* USER CODE BEGIN INCLUDE */
-
-/* USER CODE END INCLUDE */
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
-  * @{
-  */
-
-/** @defgroup USBD_DESC USBD_DESC
-  * @brief Usb device descriptors module.
-  * @{
-  */
-
-/** @defgroup USBD_DESC_Exported_Constants USBD_DESC_Exported_Constants
-  * @brief Constants.
-  * @{
-  */
-#define         DEVICE_ID1          (UID_BASE)
-#define         DEVICE_ID2          (UID_BASE + 0x4)
-#define         DEVICE_ID3          (UID_BASE + 0x8)
-
-#define  USB_SIZ_STRING_SERIAL       0x1A
-
-/* USER CODE BEGIN EXPORTED_CONSTANTS */
-
-/* USER CODE END EXPORTED_CONSTANTS */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Exported_Defines USBD_DESC_Exported_Defines
-  * @brief Defines.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_DEFINES */
-
-/* USER CODE END EXPORTED_DEFINES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Exported_TypesDefinitions USBD_DESC_Exported_TypesDefinitions
-  * @brief Types.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_TYPES */
-
-/* USER CODE END EXPORTED_TYPES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Exported_Macros USBD_DESC_Exported_Macros
-  * @brief Aliases.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_MACRO */
-
-/* USER CODE END EXPORTED_MACRO */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Exported_Variables USBD_DESC_Exported_Variables
-  * @brief Public variables.
-  * @{
-  */
-
-/** Descriptor for the Usb device. */
-extern USBD_DescriptorsTypeDef FS_Desc;
-
-/* USER CODE BEGIN EXPORTED_VARIABLES */
-
-/* USER CODE END EXPORTED_VARIABLES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Exported_FunctionsPrototype USBD_DESC_Exported_FunctionsPrototype
-  * @brief Public functions declaration.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_FUNCTIONS */
-
-/* USER CODE END EXPORTED_FUNCTIONS */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USBD_DESC__C__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/STM32L476RGTx_FLASH.ld

@@ -1,204 +0,0 @@
-/*
-******************************************************************************
-**
-
-**  File        : LinkerScript.ld
-**
-**  Author		: Auto-generated by System Workbench for STM32
-**
-**  Abstract    : Linker script for STM32L476RGTx series
-**                1024Kbytes FLASH and 128Kbytes RAM
-**
-**                Set heap size, stack size and stack location according
-**                to application requirements.
-**
-**                Set memory bank area and size if external memory is used.
-**
-**  Target      : STMicroelectronics STM32
-**
-**  Distribution: The file is distributed “as is,” without any warranty
-**                of any kind.
-**
-*****************************************************************************
-** @attention
-**
-** <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
-**
-** Redistribution and use in source and binary forms, with or without modification,
-** are permitted provided that the following conditions are met:
-**   1. Redistributions of source code must retain the above copyright notice,
-**      this list of conditions and the following disclaimer.
-**   2. Redistributions in binary form must reproduce the above copyright notice,
-**      this list of conditions and the following disclaimer in the documentation
-**      and/or other materials provided with the distribution.
-**   3. Neither the name of STMicroelectronics nor the names of its contributors
-**      may be used to endorse or promote products derived from this software
-**      without specific prior written permission.
-**
-** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-**
-*****************************************************************************
-*/
-
-/* Entry Point */
-ENTRY(Reset_Handler)
-
-/* Highest address of the user mode stack */
-_estack = 0x20018000;    /* end of RAM */
-/* Generate a link error if heap and stack don't fit into RAM */
-_Min_Heap_Size = 0x200;      /* required amount of heap  */
-_Min_Stack_Size = 0x400; /* required amount of stack */
-
-/* Specify the memory areas */
-MEMORY
-{
-RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 96K
-RAM2 (xrw)      : ORIGIN = 0x10000000, LENGTH = 32K
-FLASH (rx)      : ORIGIN = 0x8008000, LENGTH = 992K
-}
-
-/* Define output sections */
-SECTIONS
-{
-  /* The startup code goes first into FLASH */
-  .isr_vector :
-  {
-    . = ALIGN(8);
-    KEEP(*(.isr_vector)) /* Startup code */
-    . = ALIGN(8);
-  } >FLASH
-
-  /* The program code and other data goes into FLASH */
-  .text :
-  {
-    . = ALIGN(8);
-    *(.text)           /* .text sections (code) */
-    *(.text*)          /* .text* sections (code) */
-    *(.glue_7)         /* glue arm to thumb code */
-    *(.glue_7t)        /* glue thumb to arm code */
-    *(.eh_frame)
-
-    KEEP (*(.init))
-    KEEP (*(.fini))
-
-    . = ALIGN(8);
-    _etext = .;        /* define a global symbols at end of code */
-  } >FLASH
-
-  /* Constant data goes into FLASH */
-  .rodata :
-  {
-    . = ALIGN(8);
-    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
-    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
-    . = ALIGN(8);
-  } >FLASH
-
-  .ARM.extab   : 
-  { 
-  . = ALIGN(8);
-  *(.ARM.extab* .gnu.linkonce.armextab.*)
-  . = ALIGN(8);
-  } >FLASH
-  .ARM : {
-	. = ALIGN(8);
-    __exidx_start = .;
-    *(.ARM.exidx*)
-    __exidx_end = .;
-	. = ALIGN(8);
-  } >FLASH
-
-  .preinit_array     :
-  {
-	. = ALIGN(8);
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array*))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-	. = ALIGN(8);
-  } >FLASH
-  
-  .init_array :
-  {
-	. = ALIGN(8);
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT(.init_array.*)))
-    KEEP (*(.init_array*))
-    PROVIDE_HIDDEN (__init_array_end = .);
-	. = ALIGN(8);
-  } >FLASH
-  .fini_array :
-  {
-	. = ALIGN(8);
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT(.fini_array.*)))
-    KEEP (*(.fini_array*))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-	. = ALIGN(8);
-  } >FLASH
-
-  /* used by the startup to initialize data */
-  _sidata = LOADADDR(.data);
-
-  /* Initialized data sections goes into RAM, load LMA copy after code */
-  .data : 
-  {
-    . = ALIGN(8);
-    _sdata = .;        /* create a global symbol at data start */
-    *(.data)           /* .data sections */
-    *(.data*)          /* .data* sections */
-
-    . = ALIGN(8);
-    _edata = .;        /* define a global symbol at data end */
-  } >RAM AT> FLASH
-
-  
-  /* Uninitialized data section */
-  . = ALIGN(4);
-  .bss :
-  {
-    /* This is used by the startup in order to initialize the .bss secion */
-    _sbss = .;         /* define a global symbol at bss start */
-    __bss_start__ = _sbss;
-    *(.bss)
-    *(.bss*)
-    *(COMMON)
-
-    . = ALIGN(4);
-    _ebss = .;         /* define a global symbol at bss end */
-    __bss_end__ = _ebss;
-  } >RAM
-
-  /* User_heap_stack section, used to check that there is enough RAM left */
-  ._user_heap_stack :
-  {
-    . = ALIGN(8);
-    PROVIDE ( end = . );
-    PROVIDE ( _end = . );
-    . = . + _Min_Heap_Size;
-    . = . + _Min_Stack_Size;
-    . = ALIGN(8);
-  } >RAM
-
-  
-
-  /* Remove information from the standard libraries */
-  /DISCARD/ :
-  {
-    libc.a ( * )
-    libm.a ( * )
-    libgcc.a ( * )
-  }
-
-  .ARM.attributes 0 : { *(.ARM.attributes) }
-}
-
-

firmware/targets/f2/STM32L476RGTx_FLASH_NO_BOOT.ld

@@ -1,204 +0,0 @@
-/*
-******************************************************************************
-**
-
-**  File        : LinkerScript.ld
-**
-**  Author		: Auto-generated by System Workbench for STM32
-**
-**  Abstract    : Linker script for STM32L476RGTx series
-**                1024Kbytes FLASH and 128Kbytes RAM
-**
-**                Set heap size, stack size and stack location according
-**                to application requirements.
-**
-**                Set memory bank area and size if external memory is used.
-**
-**  Target      : STMicroelectronics STM32
-**
-**  Distribution: The file is distributed “as is,” without any warranty
-**                of any kind.
-**
-*****************************************************************************
-** @attention
-**
-** <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
-**
-** Redistribution and use in source and binary forms, with or without modification,
-** are permitted provided that the following conditions are met:
-**   1. Redistributions of source code must retain the above copyright notice,
-**      this list of conditions and the following disclaimer.
-**   2. Redistributions in binary form must reproduce the above copyright notice,
-**      this list of conditions and the following disclaimer in the documentation
-**      and/or other materials provided with the distribution.
-**   3. Neither the name of STMicroelectronics nor the names of its contributors
-**      may be used to endorse or promote products derived from this software
-**      without specific prior written permission.
-**
-** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-**
-*****************************************************************************
-*/
-
-/* Entry Point */
-ENTRY(Reset_Handler)
-
-/* Highest address of the user mode stack */
-_estack = 0x20018000;    /* end of RAM */
-/* Generate a link error if heap and stack don't fit into RAM */
-_Min_Heap_Size = 0x200;      /* required amount of heap  */
-_Min_Stack_Size = 0x400; /* required amount of stack */
-
-/* Specify the memory areas */
-MEMORY
-{
-RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 96K
-RAM2 (xrw)      : ORIGIN = 0x10000000, LENGTH = 32K
-FLASH (rx)      : ORIGIN = 0x8000000, LENGTH = 1024K
-}
-
-/* Define output sections */
-SECTIONS
-{
-  /* The startup code goes first into FLASH */
-  .isr_vector :
-  {
-    . = ALIGN(8);
-    KEEP(*(.isr_vector)) /* Startup code */
-    . = ALIGN(8);
-  } >FLASH
-
-  /* The program code and other data goes into FLASH */
-  .text :
-  {
-    . = ALIGN(8);
-    *(.text)           /* .text sections (code) */
-    *(.text*)          /* .text* sections (code) */
-    *(.glue_7)         /* glue arm to thumb code */
-    *(.glue_7t)        /* glue thumb to arm code */
-    *(.eh_frame)
-
-    KEEP (*(.init))
-    KEEP (*(.fini))
-
-    . = ALIGN(8);
-    _etext = .;        /* define a global symbols at end of code */
-  } >FLASH
-
-  /* Constant data goes into FLASH */
-  .rodata :
-  {
-    . = ALIGN(8);
-    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
-    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
-    . = ALIGN(8);
-  } >FLASH
-
-  .ARM.extab   : 
-  { 
-  . = ALIGN(8);
-  *(.ARM.extab* .gnu.linkonce.armextab.*)
-  . = ALIGN(8);
-  } >FLASH
-  .ARM : {
-	. = ALIGN(8);
-    __exidx_start = .;
-    *(.ARM.exidx*)
-    __exidx_end = .;
-	. = ALIGN(8);
-  } >FLASH
-
-  .preinit_array     :
-  {
-	. = ALIGN(8);
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array*))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-	. = ALIGN(8);
-  } >FLASH
-  
-  .init_array :
-  {
-	. = ALIGN(8);
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT(.init_array.*)))
-    KEEP (*(.init_array*))
-    PROVIDE_HIDDEN (__init_array_end = .);
-	. = ALIGN(8);
-  } >FLASH
-  .fini_array :
-  {
-	. = ALIGN(8);
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT(.fini_array.*)))
-    KEEP (*(.fini_array*))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-	. = ALIGN(8);
-  } >FLASH
-
-  /* used by the startup to initialize data */
-  _sidata = LOADADDR(.data);
-
-  /* Initialized data sections goes into RAM, load LMA copy after code */
-  .data : 
-  {
-    . = ALIGN(8);
-    _sdata = .;        /* create a global symbol at data start */
-    *(.data)           /* .data sections */
-    *(.data*)          /* .data* sections */
-
-    . = ALIGN(8);
-    _edata = .;        /* define a global symbol at data end */
-  } >RAM AT> FLASH
-
-  
-  /* Uninitialized data section */
-  . = ALIGN(4);
-  .bss :
-  {
-    /* This is used by the startup in order to initialize the .bss secion */
-    _sbss = .;         /* define a global symbol at bss start */
-    __bss_start__ = _sbss;
-    *(.bss)
-    *(.bss*)
-    *(COMMON)
-
-    . = ALIGN(4);
-    _ebss = .;         /* define a global symbol at bss end */
-    __bss_end__ = _ebss;
-  } >RAM
-
-  /* User_heap_stack section, used to check that there is enough RAM left */
-  ._user_heap_stack :
-  {
-    . = ALIGN(8);
-    PROVIDE ( end = . );
-    PROVIDE ( _end = . );
-    . = . + _Min_Heap_Size;
-    . = . + _Min_Stack_Size;
-    . = ALIGN(8);
-  } >RAM
-
-  
-
-  /* Remove information from the standard libraries */
-  /DISCARD/ :
-  {
-    libc.a ( * )
-    libm.a ( * )
-    libgcc.a ( * )
-  }
-
-  .ARM.attributes 0 : { *(.ARM.attributes) }
-}
-
-

firmware/targets/f2/Src/adc.c

@@ -1,141 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : ADC.c
-  * Description        : This file provides code for the configuration
-  *                      of the ADC instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "adc.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-ADC_HandleTypeDef hadc1;
-
-/* ADC1 init function */
-void MX_ADC1_Init(void)
-{
-  ADC_MultiModeTypeDef multimode = {0};
-  ADC_ChannelConfTypeDef sConfig = {0};
-
-  /** Common config
-  */
-  hadc1.Instance = ADC1;
-  hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
-  hadc1.Init.Resolution = ADC_RESOLUTION_12B;
-  hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
-  hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
-  hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
-  hadc1.Init.LowPowerAutoWait = DISABLE;
-  hadc1.Init.ContinuousConvMode = DISABLE;
-  hadc1.Init.NbrOfConversion = 1;
-  hadc1.Init.DiscontinuousConvMode = DISABLE;
-  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
-  hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
-  hadc1.Init.DMAContinuousRequests = DISABLE;
-  hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED;
-  hadc1.Init.OversamplingMode = DISABLE;
-  if (HAL_ADC_Init(&hadc1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /** Configure the ADC multi-mode
-  */
-  multimode.Mode = ADC_MODE_INDEPENDENT;
-  if (HAL_ADCEx_MultiModeConfigChannel(&hadc1, &multimode) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /** Configure Regular Channel
-  */
-  sConfig.Channel = ADC_CHANNEL_4;
-  sConfig.Rank = ADC_REGULAR_RANK_1;
-  sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
-  sConfig.SingleDiff = ADC_SINGLE_ENDED;
-  sConfig.OffsetNumber = ADC_OFFSET_NONE;
-  sConfig.Offset = 0;
-  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(adcHandle->Instance==ADC1)
-  {
-  /* USER CODE BEGIN ADC1_MspInit 0 */
-
-  /* USER CODE END ADC1_MspInit 0 */
-    /* ADC1 clock enable */
-    __HAL_RCC_ADC_CLK_ENABLE();
-
-    __HAL_RCC_GPIOC_CLK_ENABLE();
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**ADC1 GPIO Configuration
-    PC3     ------> ADC1_IN4
-    PA0     ------> ADC1_IN5
-    */
-    GPIO_InitStruct.Pin = BATT_V_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(BATT_V_GPIO_Port, &GPIO_InitStruct);
-
-    GPIO_InitStruct.Pin = IR_RX_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(IR_RX_GPIO_Port, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN ADC1_MspInit 1 */
-
-  /* USER CODE END ADC1_MspInit 1 */
-  }
-}
-
-void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
-{
-
-  if(adcHandle->Instance==ADC1)
-  {
-  /* USER CODE BEGIN ADC1_MspDeInit 0 */
-
-  /* USER CODE END ADC1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_ADC_CLK_DISABLE();
-
-    /**ADC1 GPIO Configuration
-    PC3     ------> ADC1_IN4
-    PA0     ------> ADC1_IN5
-    */
-    HAL_GPIO_DeInit(BATT_V_GPIO_Port, BATT_V_Pin);
-
-    HAL_GPIO_DeInit(IR_RX_GPIO_Port, IR_RX_Pin);
-
-  /* USER CODE BEGIN ADC1_MspDeInit 1 */
-
-  /* USER CODE END ADC1_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/comp.c

@@ -1,98 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : COMP.c
-  * Description        : This file provides code for the configuration
-  *                      of the COMP instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "comp.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-COMP_HandleTypeDef hcomp1;
-
-/* COMP1 init function */
-void MX_COMP1_Init(void)
-{
-
-  hcomp1.Instance = COMP1;
-  hcomp1.Init.InvertingInput = COMP_INPUT_MINUS_1_2VREFINT;
-  hcomp1.Init.NonInvertingInput = COMP_INPUT_PLUS_IO1;
-  hcomp1.Init.OutputPol = COMP_OUTPUTPOL_NONINVERTED;
-  hcomp1.Init.Hysteresis = COMP_HYSTERESIS_NONE;
-  hcomp1.Init.BlankingSrce = COMP_BLANKINGSRC_NONE;
-  hcomp1.Init.Mode = COMP_POWERMODE_HIGHSPEED;
-  hcomp1.Init.WindowMode = COMP_WINDOWMODE_DISABLE;
-  hcomp1.Init.TriggerMode = COMP_TRIGGERMODE_NONE;
-  if (HAL_COMP_Init(&hcomp1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_COMP_MspInit(COMP_HandleTypeDef* compHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(compHandle->Instance==COMP1)
-  {
-  /* USER CODE BEGIN COMP1_MspInit 0 */
-
-  /* USER CODE END COMP1_MspInit 0 */
-
-    __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**COMP1 GPIO Configuration
-    PC5     ------> COMP1_INP
-    */
-    GPIO_InitStruct.Pin = RFID_RF_IN_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(RFID_RF_IN_GPIO_Port, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN COMP1_MspInit 1 */
-
-  /* USER CODE END COMP1_MspInit 1 */
-  }
-}
-
-void HAL_COMP_MspDeInit(COMP_HandleTypeDef* compHandle)
-{
-
-  if(compHandle->Instance==COMP1)
-  {
-  /* USER CODE BEGIN COMP1_MspDeInit 0 */
-
-  /* USER CODE END COMP1_MspDeInit 0 */
-
-    /**COMP1 GPIO Configuration
-    PC5     ------> COMP1_INP
-    */
-    HAL_GPIO_DeInit(RFID_RF_IN_GPIO_Port, RFID_RF_IN_Pin);
-
-  /* USER CODE BEGIN COMP1_MspDeInit 1 */
-
-  /* USER CODE END COMP1_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/fatfs/ffconf.h

@@ -1,270 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  *  FatFs - Generic FAT file system module  R0.12c (C)ChaN, 2017
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-#ifndef _FFCONF
-#define _FFCONF 68300	/* Revision ID */
-
-/*-----------------------------------------------------------------------------/
-/ Additional user header to be used  
-/-----------------------------------------------------------------------------*/
-
-#include "main.h"
-#include "stm32l4xx_hal.h"
-#include "cmsis_os.h" /* _FS_REENTRANT set to 1 and CMSIS API chosen */
-
-/*-----------------------------------------------------------------------------/
-/ Function Configurations
-/-----------------------------------------------------------------------------*/
-
-#define _FS_READONLY         0      /* 0:Read/Write or 1:Read only */
-/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
-/  Read-only configuration removes writing API functions, f_write(), f_sync(),
-/  f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree()
-/  and optional writing functions as well. */
-
-#define _FS_MINIMIZE         0      /* 0 to 3 */
-/* This option defines minimization level to remove some basic API functions.
-/
-/   0: All basic functions are enabled.
-/   1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename()
-/      are removed.
-/   2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
-/   3: f_lseek() function is removed in addition to 2. */
-
-#define _USE_STRFUNC         2      /* 0:Disable or 1-2:Enable */
-/* This option switches string functions, f_gets(), f_putc(), f_puts() and
-/  f_printf().
-/
-/  0: Disable string functions.
-/  1: Enable without LF-CRLF conversion.
-/  2: Enable with LF-CRLF conversion. */
-
-#define _USE_FIND            0
-/* This option switches filtered directory read functions, f_findfirst() and
-/  f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */
-
-#define _USE_MKFS            1
-/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */
-
-#define _USE_FASTSEEK        1
-/* This option switches fast seek feature. (0:Disable or 1:Enable) */
-
-#define	_USE_EXPAND		0
-/* This option switches f_expand function. (0:Disable or 1:Enable) */
-
-#define _USE_CHMOD		0
-/* This option switches attribute manipulation functions, f_chmod() and f_utime().
-/  (0:Disable or 1:Enable) Also _FS_READONLY needs to be 0 to enable this option. */
-
-#define _USE_LABEL           1
-/* This option switches volume label functions, f_getlabel() and f_setlabel().
-/  (0:Disable or 1:Enable) */
-
-#define _USE_FORWARD         0
-/* This option switches f_forward() function. (0:Disable or 1:Enable) */
-
-/*-----------------------------------------------------------------------------/
-/ Locale and Namespace Configurations
-/-----------------------------------------------------------------------------*/
-
-#define _CODE_PAGE         850
-/* This option specifies the OEM code page to be used on the target system.
-/  Incorrect setting of the code page can cause a file open failure.
-/
-/   1   - ASCII (No extended character. Non-LFN cfg. only)
-/   437 - U.S.
-/   720 - Arabic
-/   737 - Greek
-/   771 - KBL
-/   775 - Baltic
-/   850 - Latin 1
-/   852 - Latin 2
-/   855 - Cyrillic
-/   857 - Turkish
-/   860 - Portuguese
-/   861 - Icelandic
-/   862 - Hebrew
-/   863 - Canadian French
-/   864 - Arabic
-/   865 - Nordic
-/   866 - Russian
-/   869 - Greek 2
-/   932 - Japanese (DBCS)
-/   936 - Simplified Chinese (DBCS)
-/   949 - Korean (DBCS)
-/   950 - Traditional Chinese (DBCS)
-*/
-
-#define _USE_LFN     2    /* 0 to 3 */
-#define _MAX_LFN     255  /* Maximum LFN length to handle (12 to 255) */
-/* The _USE_LFN switches the support of long file name (LFN).
-/
-/   0: Disable support of LFN. _MAX_LFN has no effect.
-/   1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
-/   2: Enable LFN with dynamic working buffer on the STACK.
-/   3: Enable LFN with dynamic working buffer on the HEAP.
-/
-/  To enable the LFN, Unicode handling functions (option/unicode.c) must be added
-/  to the project. The working buffer occupies (_MAX_LFN + 1) * 2 bytes and
-/  additional 608 bytes at exFAT enabled. _MAX_LFN can be in range from 12 to 255.
-/  It should be set 255 to support full featured LFN operations.
-/  When use stack for the working buffer, take care on stack overflow. When use heap
-/  memory for the working buffer, memory management functions, ff_memalloc() and
-/  ff_memfree(), must be added to the project. */
-
-#define _LFN_UNICODE    0 /* 0:ANSI/OEM or 1:Unicode */
-/* This option switches character encoding on the API. (0:ANSI/OEM or 1:UTF-16)
-/  To use Unicode string for the path name, enable LFN and set _LFN_UNICODE = 1.
-/  This option also affects behavior of string I/O functions. */
-
-#define _STRF_ENCODE    3
-/* When _LFN_UNICODE == 1, this option selects the character encoding ON THE FILE to
-/  be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf().
-/
-/  0: ANSI/OEM
-/  1: UTF-16LE
-/  2: UTF-16BE
-/  3: UTF-8
-/
-/  This option has no effect when _LFN_UNICODE == 0. */
-
-#define _FS_RPATH       0 /* 0 to 2 */
-/* This option configures support of relative path.
-/
-/   0: Disable relative path and remove related functions.
-/   1: Enable relative path. f_chdir() and f_chdrive() are available.
-/   2: f_getcwd() function is available in addition to 1.
-*/
-
-/*---------------------------------------------------------------------------/
-/ Drive/Volume Configurations
-/----------------------------------------------------------------------------*/
-
-#define _VOLUMES    1
-/* Number of volumes (logical drives) to be used. */
-
-/* USER CODE BEGIN Volumes */  
-#define _STR_VOLUME_ID          0	/* 0:Use only 0-9 for drive ID, 1:Use strings for drive ID */
-#define _VOLUME_STRS            "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
-/* _STR_VOLUME_ID switches string support of volume ID.
-/  When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
-/  number in the path name. _VOLUME_STRS defines the drive ID strings for each
-/  logical drives. Number of items must be equal to _VOLUMES. Valid characters for
-/  the drive ID strings are: A-Z and 0-9. */
-/* USER CODE END Volumes */  
-
-#define _MULTI_PARTITION     0 /* 0:Single partition, 1:Multiple partition */
-/* This option switches support of multi-partition on a physical drive.
-/  By default (0), each logical drive number is bound to the same physical drive
-/  number and only an FAT volume found on the physical drive will be mounted.
-/  When multi-partition is enabled (1), each logical drive number can be bound to
-/  arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()
-/  funciton will be available. */
-#define _MIN_SS    512  /* 512, 1024, 2048 or 4096 */
-#define _MAX_SS    4096  /* 512, 1024, 2048 or 4096 */
-/* These options configure the range of sector size to be supported. (512, 1024,
-/  2048 or 4096) Always set both 512 for most systems, all type of memory cards and
-/  harddisk. But a larger value may be required for on-board flash memory and some
-/  type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured
-/  to variable sector size and GET_SECTOR_SIZE command must be implemented to the
-/  disk_ioctl() function. */
-
-#define	_USE_TRIM      0
-/* This option switches support of ATA-TRIM. (0:Disable or 1:Enable)
-/  To enable Trim function, also CTRL_TRIM command should be implemented to the
-/  disk_ioctl() function. */
-
-#define _FS_NOFSINFO    0 /* 0,1,2 or 3 */
-/* If you need to know correct free space on the FAT32 volume, set bit 0 of this
-/  option, and f_getfree() function at first time after volume mount will force
-/  a full FAT scan. Bit 1 controls the use of last allocated cluster number.
-/
-/  bit0=0: Use free cluster count in the FSINFO if available.
-/  bit0=1: Do not trust free cluster count in the FSINFO.
-/  bit1=0: Use last allocated cluster number in the FSINFO if available.
-/  bit1=1: Do not trust last allocated cluster number in the FSINFO.
-*/
-
-/*---------------------------------------------------------------------------/
-/ System Configurations
-/----------------------------------------------------------------------------*/
-
-#define _FS_TINY    1      /* 0:Normal or 1:Tiny */
-/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
-/  At the tiny configuration, size of file object (FIL) is reduced _MAX_SS bytes.
-/  Instead of private sector buffer eliminated from the file object, common sector
-/  buffer in the file system object (FATFS) is used for the file data transfer. */
-
-#define _FS_EXFAT	1
-/* This option switches support of exFAT file system. (0:Disable or 1:Enable)
-/  When enable exFAT, also LFN needs to be enabled. (_USE_LFN >= 1)
-/  Note that enabling exFAT discards C89 compatibility. */
-
-#define _FS_NORTC	0
-#define _NORTC_MON	6
-#define _NORTC_MDAY	4
-#define _NORTC_YEAR	2015
-/* The option _FS_NORTC switches timestamp functiton. If the system does not have
-/  any RTC function or valid timestamp is not needed, set _FS_NORTC = 1 to disable
-/  the timestamp function. All objects modified by FatFs will have a fixed timestamp
-/  defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR in local time.
-/  To enable timestamp function (_FS_NORTC = 0), get_fattime() function need to be
-/  added to the project to get current time form real-time clock. _NORTC_MON,
-/  _NORTC_MDAY and _NORTC_YEAR have no effect. 
-/  These options have no effect at read-only configuration (_FS_READONLY = 1). */
-
-#define _FS_LOCK    2     /* 0:Disable or >=1:Enable */
-/* The option _FS_LOCK switches file lock function to control duplicated file open
-/  and illegal operation to open objects. This option must be 0 when _FS_READONLY
-/  is 1.
-/
-/  0:  Disable file lock function. To avoid volume corruption, application program
-/      should avoid illegal open, remove and rename to the open objects.
-/  >0: Enable file lock function. The value defines how many files/sub-directories
-/      can be opened simultaneously under file lock control. Note that the file
-/      lock control is independent of re-entrancy. */
-
-#define _FS_REENTRANT    1  /* 0:Disable or 1:Enable */
-#define _FS_TIMEOUT      1000 /* Timeout period in unit of time ticks */
-#define _SYNC_t          osMutexId_t
-/* The option _FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs
-/  module itself. Note that regardless of this option, file access to different
-/  volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
-/  and f_fdisk() function, are always not re-entrant. Only file/directory access
-/  to the same volume is under control of this function.
-/
-/   0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
-/   1: Enable re-entrancy. Also user provided synchronization handlers,
-/      ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
-/      function, must be added to the project. Samples are available in
-/      option/syscall.c.
-/
-/  The _FS_TIMEOUT defines timeout period in unit of time tick.
-/  The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
-/  SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be
-/  included somewhere in the scope of ff.h. */
-
-/* define the ff_malloc ff_free macros as standard malloc free */
-#if !defined(ff_malloc) && !defined(ff_free)
-#include <stdlib.h>
-#define ff_malloc  malloc
-#define ff_free  free
-#endif
-
-#endif /* _FFCONF */

firmware/targets/f2/Src/freertos.c

@@ -1,185 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * File Name          : freertos.c
-  * Description        : Code for freertos applications
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "FreeRTOS.h"
-#include "task.h"
-#include "main.h"
-#include "cmsis_os.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-#include <stdlib.h>
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
-
-/* USER CODE END PTD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN Variables */
-
-/* USER CODE END Variables */
-/* Definitions for defaultTask */
-osThreadId_t defaultTaskHandle;
-const osThreadAttr_t defaultTask_attributes = {
-  .name = "defaultTask",
-  .priority = (osPriority_t) osPriorityNormal,
-  .stack_size = 1024 * 4
-};
-/* Definitions for app_main */
-osThreadId_t app_mainHandle;
-const osThreadAttr_t app_main_attributes = {
-  .name = "app_main",
-  .priority = (osPriority_t) osPriorityLow,
-  .stack_size = 1024 * 4
-};
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN FunctionPrototypes */
-
-/* USER CODE END FunctionPrototypes */
-
-void StartDefaultTask(void *argument);
-extern void app(void *argument);
-
-extern void MX_USB_DEVICE_Init(void);
-void MX_FREERTOS_Init(void); /* (MISRA C 2004 rule 8.1) */
-
-/* Hook prototypes */
-void configureTimerForRunTimeStats(void);
-unsigned long getRunTimeCounterValue(void);
-void vApplicationIdleHook(void);
-void vApplicationStackOverflowHook(xTaskHandle xTask, signed char *pcTaskName);
-
-/* USER CODE BEGIN 1 */
-/* Functions needed when configGENERATE_RUN_TIME_STATS is on */
-__weak void configureTimerForRunTimeStats(void)
-{
-
-}
-
-__weak unsigned long getRunTimeCounterValue(void)
-{
-return 0;
-}
-/* USER CODE END 1 */
-
-/* USER CODE BEGIN 2 */
-__weak void vApplicationIdleHook( void )
-{
-   /* vApplicationIdleHook() will only be called if configUSE_IDLE_HOOK is set
-   to 1 in FreeRTOSConfig.h. It will be called on each iteration of the idle
-   task. It is essential that code added to this hook function never attempts
-   to block in any way (for example, call xQueueReceive() with a block time
-   specified, or call vTaskDelay()). If the application makes use of the
-   vTaskDelete() API function (as this demo application does) then it is also
-   important that vApplicationIdleHook() is permitted to return to its calling
-   function, because it is the responsibility of the idle task to clean up
-   memory allocated by the kernel to any task that has since been deleted. */
-}
-/* USER CODE END 2 */
-
-/* USER CODE BEGIN 4 */
-__weak void vApplicationStackOverflowHook(xTaskHandle xTask, signed char *pcTaskName)
-{
-   /* Run time stack overflow checking is performed if
-   configCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2. This hook function is
-   called if a stack overflow is detected. */
-    exit(255);
-}
-/* USER CODE END 4 */
-
-/**
-  * @brief  FreeRTOS initialization
-  * @param  None
-  * @retval None
-  */
-void MX_FREERTOS_Init(void) {
-  /* USER CODE BEGIN Init */
-
-  /* USER CODE END Init */
-
-  /* USER CODE BEGIN RTOS_MUTEX */
-  /* add mutexes, ... */
-  /* USER CODE END RTOS_MUTEX */
-
-  /* USER CODE BEGIN RTOS_SEMAPHORES */
-  /* add semaphores, ... */
-  /* USER CODE END RTOS_SEMAPHORES */
-
-  /* USER CODE BEGIN RTOS_TIMERS */
-  /* start timers, add new ones, ... */
-  /* USER CODE END RTOS_TIMERS */
-
-  /* USER CODE BEGIN RTOS_QUEUES */
-  /* add queues, ... */
-  /* USER CODE END RTOS_QUEUES */
-
-  /* Create the thread(s) */
-  /* creation of defaultTask */
-  defaultTaskHandle = osThreadNew(StartDefaultTask, NULL, &defaultTask_attributes);
-
-  /* creation of app_main */
-  app_mainHandle = osThreadNew(app, NULL, &app_main_attributes);
-
-  /* USER CODE BEGIN RTOS_THREADS */
-  /* add threads, ... */
-  /* USER CODE END RTOS_THREADS */
-
-}
-
-/* USER CODE BEGIN Header_StartDefaultTask */
-/**
-  * @brief  Function implementing the defaultTask thread.
-  * @param  argument: Not used
-  * @retval None
-  */
-/* USER CODE END Header_StartDefaultTask */
-void StartDefaultTask(void *argument)
-{
-  /* init code for USB_DEVICE */
-  MX_USB_DEVICE_Init();
-  /* USER CODE BEGIN StartDefaultTask */
-  /* Infinite loop */
-  for(;;)
-  {
-    osDelay(1);
-  }
-  /* USER CODE END StartDefaultTask */
-}
-
-/* Private application code --------------------------------------------------*/
-/* USER CODE BEGIN Application */
-
-/* USER CODE END Application */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/gpio.c

@@ -1,190 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : gpio.c
-  * Description        : This file provides code for the configuration
-  *                      of all used GPIO pins.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "gpio.h"
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/*----------------------------------------------------------------------------*/
-/* Configure GPIO                                                             */
-/*----------------------------------------------------------------------------*/
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/** Configure pins as
-        * Analog
-        * Input
-        * Output
-        * EVENT_OUT
-        * EXTI
-*/
-void MX_GPIO_Init(void)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-
-  /* GPIO Ports Clock Enable */
-  __HAL_RCC_GPIOC_CLK_ENABLE();
-  __HAL_RCC_GPIOH_CLK_ENABLE();
-  __HAL_RCC_GPIOA_CLK_ENABLE();
-  __HAL_RCC_GPIOB_CLK_ENABLE();
-  __HAL_RCC_GPIOD_CLK_ENABLE();
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(DISPLAY_DI_GPIO_Port, DISPLAY_DI_Pin, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOC, NFC_CS_Pin|SD_CS_Pin, GPIO_PIN_SET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOB, LED_BLUE_Pin|LED_GREEN_Pin, GPIO_PIN_SET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOB, DISPLAY_RST_Pin|DISPLAY_BACKLIGHT_Pin, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOC, VIBRO_Pin|DISPLAY_CS_Pin, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOA, LED_RED_Pin|CC1101_CS_Pin, GPIO_PIN_SET);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = BUTTON_BACK_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
-  GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-  HAL_GPIO_Init(BUTTON_BACK_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PC0 PC1 */
-  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = CHRG_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
-  GPIO_InitStruct.Pull = GPIO_PULLUP;
-  HAL_GPIO_Init(CHRG_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = BUTTON_DOWN_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
-  GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-  HAL_GPIO_Init(BUTTON_DOWN_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PAPin PAPin */
-  GPIO_InitStruct.Pin = DISPLAY_DI_Pin|CC1101_CS_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PA4 PA5 PA6 PA7 */
-  GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PCPin PCPin PCPin PCPin */
-  GPIO_InitStruct.Pin = NFC_CS_Pin|VIBRO_Pin|DISPLAY_CS_Pin|SD_CS_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PBPin PBPin PBPin PBPin */
-  GPIO_InitStruct.Pin = BUTTON_UP_Pin|BUTTON_LEFT_Pin|BUTTON_RIGHT_Pin|BUTTON_OK_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
-  GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PBPin PBPin */
-  GPIO_InitStruct.Pin = LED_BLUE_Pin|LED_GREEN_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PB2 PB12 */
-  GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_12;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PBPin PBPin */
-  GPIO_InitStruct.Pin = DISPLAY_RST_Pin|DISPLAY_BACKLIGHT_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = RFID_PULL_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
-  GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-  HAL_GPIO_Init(RFID_PULL_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = LED_RED_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
-  HAL_GPIO_Init(LED_RED_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PD2 */
-  GPIO_InitStruct.Pin = GPIO_PIN_2;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = CC1101_G0_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(CC1101_G0_GPIO_Port, &GPIO_InitStruct);
-
-  /* EXTI interrupt init*/
-  HAL_NVIC_SetPriority(EXTI0_IRQn, 5, 0);
-  HAL_NVIC_EnableIRQ(EXTI0_IRQn);
-
-  HAL_NVIC_SetPriority(EXTI1_IRQn, 5, 0);
-  HAL_NVIC_EnableIRQ(EXTI1_IRQn);
-
-  HAL_NVIC_SetPriority(EXTI2_IRQn, 5, 0);
-  HAL_NVIC_EnableIRQ(EXTI2_IRQn);
-
-  HAL_NVIC_SetPriority(EXTI4_IRQn, 5, 0);
-  HAL_NVIC_EnableIRQ(EXTI4_IRQn);
-
-  HAL_NVIC_SetPriority(EXTI9_5_IRQn, 5, 0);
-  HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
-
-  HAL_NVIC_SetPriority(EXTI15_10_IRQn, 5, 0);
-  HAL_NVIC_EnableIRQ(EXTI15_10_IRQn);
-
-}
-
-/* USER CODE BEGIN 2 */
-
-/* USER CODE END 2 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/main.c

@@ -1,253 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : main.c
-  * @brief          : Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-#include "cmsis_os.h"
-#include "adc.h"
-#include "comp.h"
-#include "rtc.h"
-#include "spi.h"
-#include "tim.h"
-#include "usart.h"
-#include "usb_device.h"
-#include "gpio.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-#include "fatfs/fatfs.h"
-#include "api-hal.h"
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
-
-/* USER CODE END PTD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-
-/* USER CODE BEGIN PV */
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-void SystemClock_Config(void);
-void MX_FREERTOS_Init(void);
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/**
-  * @brief  The application entry point.
-  * @retval int
-  */
-int main(void)
-{
-  /* USER CODE BEGIN 1 */
-
-  /* USER CODE END 1 */
-
-  /* MCU Configuration--------------------------------------------------------*/
-
-  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
-  HAL_Init();
-
-  /* USER CODE BEGIN Init */
-
-  /* USER CODE END Init */
-
-  /* Configure the system clock */
-  SystemClock_Config();
-
-  /* USER CODE BEGIN SysInit */
-  /* USER CODE END SysInit */
-
-  /* Initialize all configured peripherals */
-  MX_GPIO_Init();
-  MX_SPI1_Init();
-  MX_SPI3_Init();
-  MX_ADC1_Init();
-  MX_COMP1_Init();
-  MX_TIM5_Init();
-  MX_TIM15_Init();
-  MX_USART1_UART_Init();
-  MX_TIM8_Init();
-  MX_TIM2_Init();
-  MX_RTC_Init();
-  /* USER CODE BEGIN 2 */
-  MX_FATFS_Init();
-  delay_us_init_DWT();
-  api_hal_vcp_init();
-  /* USER CODE END 2 */
-
-  /* Init scheduler */
-  osKernelInitialize();  /* Call init function for freertos objects (in freertos.c) */
-  MX_FREERTOS_Init();
-  /* Start scheduler */
-  osKernelStart();
-
-  /* We should never get here as control is now taken by the scheduler */
-  /* Infinite loop */
-  /* USER CODE BEGIN WHILE */
-  while (1)
-  {
-    /* USER CODE END WHILE */
-
-    /* USER CODE BEGIN 3 */
-  }
-  /* USER CODE END 3 */
-}
-
-/**
-  * @brief System Clock Configuration
-  * @retval None
-  */
-void SystemClock_Config(void)
-{
-  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
-  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
-  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
-
-  /** Configure LSE Drive Capability
-  */
-  HAL_PWR_EnableBkUpAccess();
-  __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
-  /** Initializes the RCC Oscillators according to the specified parameters
-  * in the RCC_OscInitTypeDef structure.
-  */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE|RCC_OSCILLATORTYPE_LSE;
-  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
-  RCC_OscInitStruct.LSEState = RCC_LSE_ON;
-  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
-  RCC_OscInitStruct.PLL.PLLM = 2;
-  RCC_OscInitStruct.PLL.PLLN = 16;
-  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
-  RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
-  RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
-  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /** Initializes the CPU, AHB and APB buses clocks
-  */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
-                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
-  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
-  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
-  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
-  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
-
-  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART1
-                              |RCC_PERIPHCLK_USB|RCC_PERIPHCLK_ADC;
-  PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
-  PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_SYSCLK;
-  PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
-  PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
-  PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSE;
-  PeriphClkInit.PLLSAI1.PLLSAI1M = 2;
-  PeriphClkInit.PLLSAI1.PLLSAI1N = 12;
-  PeriphClkInit.PLLSAI1.PLLSAI1P = RCC_PLLP_DIV7;
-  PeriphClkInit.PLLSAI1.PLLSAI1Q = RCC_PLLQ_DIV2;
-  PeriphClkInit.PLLSAI1.PLLSAI1R = RCC_PLLR_DIV2;
-  PeriphClkInit.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_48M2CLK;
-  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /** Configure the main internal regulator output voltage
-  */
-  if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-}
-
-/* USER CODE BEGIN 4 */
-
-/* USER CODE END 4 */
-
-/**
-  * @brief  Period elapsed callback in non blocking mode
-  * @note   This function is called  when TIM17 interrupt took place, inside
-  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
-  * a global variable "uwTick" used as application time base.
-  * @param  htim : TIM handle
-  * @retval None
-  */
-void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
-{
-  /* USER CODE BEGIN Callback 0 */
-
-  /* USER CODE END Callback 0 */
-  if (htim->Instance == TIM17) {
-    HAL_IncTick();
-  }
-  /* USER CODE BEGIN Callback 1 */
-
-  /* USER CODE END Callback 1 */
-}
-
-/**
-  * @brief  This function is executed in case of error occurrence.
-  * @retval None
-  */
-void Error_Handler(void)
-{
-  /* USER CODE BEGIN Error_Handler_Debug */
-  /* User can add his own implementation to report the HAL error return state */
-
-  /* USER CODE END Error_Handler_Debug */
-}
-
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t *file, uint32_t line)
-{
-  /* USER CODE BEGIN 6 */
-  /* User can add his own implementation to report the file name and line number,
-     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-  /* USER CODE END 6 */
-}
-#endif /* USE_FULL_ASSERT */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/rtc.c

@@ -1,113 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : RTC.c
-  * Description        : This file provides code for the configuration
-  *                      of the RTC instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "rtc.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-RTC_HandleTypeDef hrtc;
-
-/* RTC init function */
-void MX_RTC_Init(void)
-{
-  RTC_TimeTypeDef sTime = {0};
-  RTC_DateTypeDef sDate = {0};
-
-  /** Initialize RTC Only
-  */
-  hrtc.Instance = RTC;
-  hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
-  hrtc.Init.AsynchPrediv = 127;
-  hrtc.Init.SynchPrediv = 255;
-  hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
-  hrtc.Init.OutPutRemap = RTC_OUTPUT_REMAP_NONE;
-  hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
-  hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
-  if (HAL_RTC_Init(&hrtc) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-  /* USER CODE BEGIN Check_RTC_BKUP */
-
-  /* USER CODE END Check_RTC_BKUP */
-
-  /** Initialize RTC and set the Time and Date
-  */
-  sTime.Hours = 0x0;
-  sTime.Minutes = 0x0;
-  sTime.Seconds = 0x0;
-  sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
-  sTime.StoreOperation = RTC_STOREOPERATION_RESET;
-  if (HAL_RTC_SetTime(&hrtc, &sTime, RTC_FORMAT_BCD) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sDate.WeekDay = RTC_WEEKDAY_MONDAY;
-  sDate.Month = RTC_MONTH_NOVEMBER;
-  sDate.Date = 0x20;
-  sDate.Year = 0x20;
-
-  if (HAL_RTC_SetDate(&hrtc, &sDate, RTC_FORMAT_BCD) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_RTC_MspInit(RTC_HandleTypeDef* rtcHandle)
-{
-
-  if(rtcHandle->Instance==RTC)
-  {
-  /* USER CODE BEGIN RTC_MspInit 0 */
-
-  /* USER CODE END RTC_MspInit 0 */
-    /* RTC clock enable */
-    __HAL_RCC_RTC_ENABLE();
-  /* USER CODE BEGIN RTC_MspInit 1 */
-
-  /* USER CODE END RTC_MspInit 1 */
-  }
-}
-
-void HAL_RTC_MspDeInit(RTC_HandleTypeDef* rtcHandle)
-{
-
-  if(rtcHandle->Instance==RTC)
-  {
-  /* USER CODE BEGIN RTC_MspDeInit 0 */
-
-  /* USER CODE END RTC_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_RTC_DISABLE();
-  /* USER CODE BEGIN RTC_MspDeInit 1 */
-
-  /* USER CODE END RTC_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/spi.c

@@ -1,275 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : SPI.c
-  * Description        : This file provides code for the configuration
-  *                      of the SPI instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "spi.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-SPI_HandleTypeDef hspi1;
-SPI_HandleTypeDef hspi3;
-
-/* SPI1 init function */
-void MX_SPI1_Init(void)
-{
-
-  hspi1.Instance = SPI1;
-  hspi1.Init.Mode = SPI_MODE_MASTER;
-  hspi1.Init.Direction = SPI_DIRECTION_2LINES;
-  hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
-  hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
-  hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
-  hspi1.Init.NSS = SPI_NSS_SOFT;
-  hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
-  hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
-  hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  hspi1.Init.CRCPolynomial = 7;
-  hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  hspi1.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
-  if (HAL_SPI_Init(&hspi1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-/* SPI3 init function */
-void MX_SPI3_Init(void)
-{
-
-  hspi3.Instance = SPI3;
-  hspi3.Init.Mode = SPI_MODE_MASTER;
-  hspi3.Init.Direction = SPI_DIRECTION_2LINES;
-  hspi3.Init.DataSize = SPI_DATASIZE_8BIT;
-  hspi3.Init.CLKPolarity = SPI_POLARITY_LOW;
-  hspi3.Init.CLKPhase = SPI_PHASE_2EDGE;
-  hspi3.Init.NSS = SPI_NSS_SOFT;
-  hspi3.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
-  hspi3.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  hspi3.Init.TIMode = SPI_TIMODE_DISABLE;
-  hspi3.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  hspi3.Init.CRCPolynomial = 7;
-  hspi3.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  hspi3.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
-  if (HAL_SPI_Init(&hspi3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(spiHandle->Instance==SPI1)
-  {
-  /* USER CODE BEGIN SPI1_MspInit 0 */
-
-  /* USER CODE END SPI1_MspInit 0 */
-    /* SPI1 clock enable */
-    __HAL_RCC_SPI1_CLK_ENABLE();
-
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI1 GPIO Configuration
-    PB3 (JTDO-TRACESWO)     ------> SPI1_SCK
-    PB5     ------> SPI1_MOSI
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_5;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN SPI1_MspInit 1 */
-
-  /* USER CODE END SPI1_MspInit 1 */
-  }
-  else if(spiHandle->Instance==SPI3)
-  {
-  /* USER CODE BEGIN SPI3_MspInit 0 */
-
-  /* USER CODE END SPI3_MspInit 0 */
-    /* SPI3 clock enable */
-    __HAL_RCC_SPI3_CLK_ENABLE();
-
-    __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**SPI3 GPIO Configuration
-    PC10     ------> SPI3_SCK
-    PC11     ------> SPI3_MISO
-    PC12     ------> SPI3_MOSI
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
-    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN SPI3_MspInit 1 */
-
-  /* USER CODE END SPI3_MspInit 1 */
-  }
-}
-
-void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
-{
-
-  if(spiHandle->Instance==SPI1)
-  {
-  /* USER CODE BEGIN SPI1_MspDeInit 0 */
-
-  /* USER CODE END SPI1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_SPI1_CLK_DISABLE();
-
-    /**SPI1 GPIO Configuration
-    PB3 (JTDO-TRACESWO)     ------> SPI1_SCK
-    PB5     ------> SPI1_MOSI
-    */
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_5);
-
-  /* USER CODE BEGIN SPI1_MspDeInit 1 */
-
-  /* USER CODE END SPI1_MspDeInit 1 */
-  }
-  else if(spiHandle->Instance==SPI3)
-  {
-  /* USER CODE BEGIN SPI3_MspDeInit 0 */
-
-  /* USER CODE END SPI3_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_SPI3_CLK_DISABLE();
-
-    /**SPI3 GPIO Configuration
-    PC10     ------> SPI3_SCK
-    PC11     ------> SPI3_MISO
-    PC12     ------> SPI3_MOSI
-    */
-    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12);
-
-  /* USER CODE BEGIN SPI3_MspDeInit 1 */
-
-  /* USER CODE END SPI3_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-void NFC_SPI_Reconfigure() {
-  if (HAL_SPI_DeInit(&SPI_R) != HAL_OK) {
-      Error_Handler();
-  }
-
-  SPI_R.Init.Mode = SPI_MODE_MASTER;
-  SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
-  SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
-  SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
-  SPI_R.Init.CLKPhase = SPI_PHASE_2EDGE;
-  SPI_R.Init.NSS = SPI_NSS_SOFT;
-  SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
-  SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
-  SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  SPI_R.Init.CRCPolynomial = 7;
-  SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
-
-  if (HAL_SPI_Init(&SPI_R) != HAL_OK) {
-      Error_Handler();
-  }
-}
-
-void SD_SPI_Reconfigure_Slow(void) {
-  if (HAL_SPI_DeInit(&SPI_SD_HANDLE) != HAL_OK) {
-      Error_Handler();
-  }
-
-  SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
-  SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
-  SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
-  SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
-  SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
-  SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
-  SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
-  SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
-  SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  SPI_SD_HANDLE.Init.CRCPolynomial = 7;
-  SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
-
-  if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
-      Error_Handler();
-  }
-}
-
-void SD_SPI_Reconfigure_Fast(void) {
-  if (HAL_SPI_DeInit(&SPI_SD_HANDLE) != HAL_OK) {
-      Error_Handler();
-  }
-
-  SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
-  SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
-  SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
-  SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
-  SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
-  SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
-  SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
-  SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
-  SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  SPI_SD_HANDLE.Init.CRCPolynomial = 7;
-  SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
-
-  if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
-      Error_Handler();
-  }
-}
-
-void CC1101_SPI_Reconfigure(void) {
-  if(HAL_SPI_DeInit(&SPI_R) != HAL_OK) {
-      Error_Handler();
-  }
-
-  SPI_R.Init.Mode = SPI_MODE_MASTER;
-  SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
-  SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
-  SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
-  SPI_R.Init.CLKPhase = SPI_PHASE_1EDGE;
-  SPI_R.Init.NSS = SPI_NSS_SOFT;
-  SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
-  SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
-  SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  SPI_R.Init.CRCPolynomial = 7;
-  SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
-
-  if(HAL_SPI_Init(&SPI_R) != HAL_OK) {
-      Error_Handler();
-  }
-}
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/stm32l4xx_hal_msp.c

@@ -1,86 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * File Name          : stm32l4xx_hal_msp.c
-  * Description        : This file provides code for the MSP Initialization
-  *                      and de-Initialization codes.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN TD */
-
-/* USER CODE END TD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN Define */
-
-/* USER CODE END Define */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN Macro */
-
-/* USER CODE END Macro */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* External functions --------------------------------------------------------*/
-/* USER CODE BEGIN ExternalFunctions */
-
-/* USER CODE END ExternalFunctions */
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-/**
-  * Initializes the Global MSP.
-  */
-void HAL_MspInit(void)
-{
-  /* USER CODE BEGIN MspInit 0 */
-
-  /* USER CODE END MspInit 0 */
-
-  __HAL_RCC_SYSCFG_CLK_ENABLE();
-  __HAL_RCC_PWR_CLK_ENABLE();
-
-  /* System interrupt init*/
-  /* PendSV_IRQn interrupt configuration */
-  HAL_NVIC_SetPriority(PendSV_IRQn, 15, 0);
-
-  /* USER CODE BEGIN MspInit 1 */
-
-  /* USER CODE END MspInit 1 */
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/stm32l4xx_hal_timebase_tim.c

@@ -1,112 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32l4xx_hal_timebase_TIM.c
-  * @brief   HAL time base based on the hardware TIM.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l4xx_hal.h"
-#include "stm32l4xx_hal_tim.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-TIM_HandleTypeDef        htim17;
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/**
-  * @brief  This function configures the TIM17 as a time base source.
-  *         The time source is configured  to have 1ms time base with a dedicated
-  *         Tick interrupt priority.
-  * @note   This function is called  automatically at the beginning of program after
-  *         reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
-  * @param  TickPriority: Tick interrupt priority.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
-{
-  RCC_ClkInitTypeDef    clkconfig;
-  uint32_t              uwTimclock = 0;
-  uint32_t              uwPrescalerValue = 0;
-  uint32_t              pFLatency;
-  /*Configure the TIM17 IRQ priority */
-  HAL_NVIC_SetPriority(TIM1_TRG_COM_TIM17_IRQn, TickPriority ,0);
-
-  /* Enable the TIM17 global Interrupt */
-  HAL_NVIC_EnableIRQ(TIM1_TRG_COM_TIM17_IRQn);
-  /* Enable TIM17 clock */
-  __HAL_RCC_TIM17_CLK_ENABLE();
-
-  /* Get clock configuration */
-  HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
-
-  /* Compute TIM17 clock */
-  uwTimclock = HAL_RCC_GetPCLK2Freq();
-
-  /* Compute the prescaler value to have TIM17 counter clock equal to 1MHz */
-  uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000) - 1);
-
-  /* Initialize TIM17 */
-  htim17.Instance = TIM17;
-
-  /* Initialize TIMx peripheral as follow:
-  + Period = [(TIM17CLK/1000) - 1]. to have a (1/1000) s time base.
-  + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
-  + ClockDivision = 0
-  + Counter direction = Up
-  */
-  htim17.Init.Period = (1000000 / 1000) - 1;
-  htim17.Init.Prescaler = uwPrescalerValue;
-  htim17.Init.ClockDivision = 0;
-  htim17.Init.CounterMode = TIM_COUNTERMODE_UP;
-  if(HAL_TIM_Base_Init(&htim17) == HAL_OK)
-  {
-    /* Start the TIM time Base generation in interrupt mode */
-    return HAL_TIM_Base_Start_IT(&htim17);
-  }
-
-  /* Return function status */
-  return HAL_ERROR;
-}
-
-/**
-  * @brief  Suspend Tick increment.
-  * @note   Disable the tick increment by disabling TIM17 update interrupt.
-  * @param  None
-  * @retval None
-  */
-void HAL_SuspendTick(void)
-{
-  /* Disable TIM17 update Interrupt */
-  __HAL_TIM_DISABLE_IT(&htim17, TIM_IT_UPDATE);
-}
-
-/**
-  * @brief  Resume Tick increment.
-  * @note   Enable the tick increment by Enabling TIM17 update interrupt.
-  * @param  None
-  * @retval None
-  */
-void HAL_ResumeTick(void)
-{
-  /* Enable TIM17 Update interrupt */
-  __HAL_TIM_ENABLE_IT(&htim17, TIM_IT_UPDATE);
-}
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/stm32l4xx_it.c

@@ -1,296 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32l4xx_it.c
-  * @brief   Interrupt Service Routines.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-#include "stm32l4xx_it.h"
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN TD */
-
-/* USER CODE END TD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/* External variables --------------------------------------------------------*/
-extern PCD_HandleTypeDef hpcd_USB_OTG_FS;
-extern TIM_HandleTypeDef htim8;
-extern TIM_HandleTypeDef htim17;
-
-/* USER CODE BEGIN EV */
-
-/* USER CODE END EV */
-
-/******************************************************************************/
-/*           Cortex-M4 Processor Interruption and Exception Handlers          */
-/******************************************************************************/
-/**
-  * @brief This function handles Non maskable interrupt.
-  */
-void NMI_Handler(void)
-{
-  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
-
-  /* USER CODE END NonMaskableInt_IRQn 0 */
-  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
-
-  /* USER CODE END NonMaskableInt_IRQn 1 */
-}
-
-/**
-  * @brief This function handles Hard fault interrupt.
-  */
-void HardFault_Handler(void)
-{
-  /* USER CODE BEGIN HardFault_IRQn 0 */
-  if ((*(volatile uint32_t *)CoreDebug_BASE) & (1 << 0)) {
-    __asm("bkpt 1");
-  }
-  /* USER CODE END HardFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
-    /* USER CODE END W1_HardFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Memory management fault.
-  */
-void MemManage_Handler(void)
-{
-  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
-
-  /* USER CODE END MemoryManagement_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
-    /* USER CODE END W1_MemoryManagement_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Prefetch fault, memory access fault.
-  */
-void BusFault_Handler(void)
-{
-  /* USER CODE BEGIN BusFault_IRQn 0 */
-
-  /* USER CODE END BusFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
-    /* USER CODE END W1_BusFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Undefined instruction or illegal state.
-  */
-void UsageFault_Handler(void)
-{
-  /* USER CODE BEGIN UsageFault_IRQn 0 */
-
-  /* USER CODE END UsageFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
-    /* USER CODE END W1_UsageFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Debug monitor.
-  */
-void DebugMon_Handler(void)
-{
-  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
-
-  /* USER CODE END DebugMonitor_IRQn 0 */
-  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
-
-  /* USER CODE END DebugMonitor_IRQn 1 */
-}
-
-/******************************************************************************/
-/* STM32L4xx Peripheral Interrupt Handlers                                    */
-/* Add here the Interrupt Handlers for the used peripherals.                  */
-/* For the available peripheral interrupt handler names,                      */
-/* please refer to the startup file (startup_stm32l4xx.s).                    */
-/******************************************************************************/
-
-/**
-  * @brief This function handles EXTI line0 interrupt.
-  */
-void EXTI0_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI0_IRQn 0 */
-
-  /* USER CODE END EXTI0_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_0);
-  /* USER CODE BEGIN EXTI0_IRQn 1 */
-
-  /* USER CODE END EXTI0_IRQn 1 */
-}
-
-/**
-  * @brief This function handles EXTI line1 interrupt.
-  */
-void EXTI1_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI1_IRQn 0 */
-
-  /* USER CODE END EXTI1_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_1);
-  /* USER CODE BEGIN EXTI1_IRQn 1 */
-
-  /* USER CODE END EXTI1_IRQn 1 */
-}
-
-/**
-  * @brief This function handles EXTI line2 interrupt.
-  */
-void EXTI2_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI2_IRQn 0 */
-
-  /* USER CODE END EXTI2_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_2);
-  /* USER CODE BEGIN EXTI2_IRQn 1 */
-
-  /* USER CODE END EXTI2_IRQn 1 */
-}
-
-/**
-  * @brief This function handles EXTI line4 interrupt.
-  */
-void EXTI4_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI4_IRQn 0 */
-
-  /* USER CODE END EXTI4_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_4);
-  /* USER CODE BEGIN EXTI4_IRQn 1 */
-
-  /* USER CODE END EXTI4_IRQn 1 */
-}
-
-/**
-  * @brief This function handles EXTI line[9:5] interrupts.
-  */
-void EXTI9_5_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI9_5_IRQn 0 */
-
-  /* USER CODE END EXTI9_5_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_8);
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_9);
-  /* USER CODE BEGIN EXTI9_5_IRQn 1 */
-
-  /* USER CODE END EXTI9_5_IRQn 1 */
-}
-
-/**
-  * @brief This function handles TIM1 trigger and commutation interrupts and TIM17 global interrupt.
-  */
-void TIM1_TRG_COM_TIM17_IRQHandler(void)
-{
-  /* USER CODE BEGIN TIM1_TRG_COM_TIM17_IRQn 0 */
-
-  /* USER CODE END TIM1_TRG_COM_TIM17_IRQn 0 */
-  HAL_TIM_IRQHandler(&htim17);
-  /* USER CODE BEGIN TIM1_TRG_COM_TIM17_IRQn 1 */
-
-  /* USER CODE END TIM1_TRG_COM_TIM17_IRQn 1 */
-}
-
-/**
-  * @brief This function handles EXTI line[15:10] interrupts.
-  */
-void EXTI15_10_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI15_10_IRQn 0 */
-
-  /* USER CODE END EXTI15_10_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_13);
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_15);
-  /* USER CODE BEGIN EXTI15_10_IRQn 1 */
-
-  /* USER CODE END EXTI15_10_IRQn 1 */
-}
-
-/**
-  * @brief This function handles TIM8 capture compare interrupt.
-  */
-void TIM8_CC_IRQHandler(void)
-{
-  /* USER CODE BEGIN TIM8_CC_IRQn 0 */
-
-  /* USER CODE END TIM8_CC_IRQn 0 */
-  HAL_TIM_IRQHandler(&htim8);
-  /* USER CODE BEGIN TIM8_CC_IRQn 1 */
-
-  /* USER CODE END TIM8_CC_IRQn 1 */
-}
-
-/**
-  * @brief This function handles USB OTG FS global interrupt.
-  */
-void OTG_FS_IRQHandler(void)
-{
-  /* USER CODE BEGIN OTG_FS_IRQn 0 */
-
-  /* USER CODE END OTG_FS_IRQn 0 */
-  HAL_PCD_IRQHandler(&hpcd_USB_OTG_FS);
-  /* USER CODE BEGIN OTG_FS_IRQn 1 */
-
-  /* USER CODE END OTG_FS_IRQn 1 */
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/system_stm32l4xx.c

@@ -1,344 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    system_stm32l4xx.c
-  * @author  MCD Application Team
-  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File
-  *
-  *   This file provides two functions and one global variable to be called from
-  *   user application:
-  *      - SystemInit(): This function is called at startup just after reset and
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32l4xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick
-  *                                  timer or configure other parameters.
-  *
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  *   After each device reset the MSI (4 MHz) is used as system clock source.
-  *   Then SystemInit() function is called, in "startup_stm32l4xx.s" file, to
-  *   configure the system clock before to branch to main program.
-  *
-  *   This file configures the system clock as follows:
-  *=============================================================================
-  *-----------------------------------------------------------------------------
-  *        System Clock source                    | MSI
-  *-----------------------------------------------------------------------------
-  *        SYSCLK(Hz)                             | 4000000
-  *-----------------------------------------------------------------------------
-  *        HCLK(Hz)                               | 4000000
-  *-----------------------------------------------------------------------------
-  *        AHB Prescaler                          | 1
-  *-----------------------------------------------------------------------------
-  *        APB1 Prescaler                         | 1
-  *-----------------------------------------------------------------------------
-  *        APB2 Prescaler                         | 1
-  *-----------------------------------------------------------------------------
-  *        PLL_M                                  | 1
-  *-----------------------------------------------------------------------------
-  *        PLL_N                                  | 8
-  *-----------------------------------------------------------------------------
-  *        PLL_P                                  | 7
-  *-----------------------------------------------------------------------------
-  *        PLL_Q                                  | 2
-  *-----------------------------------------------------------------------------
-  *        PLL_R                                  | 2
-  *-----------------------------------------------------------------------------
-  *        PLLSAI1_P                              | NA
-  *-----------------------------------------------------------------------------
-  *        PLLSAI1_Q                              | NA
-  *-----------------------------------------------------------------------------
-  *        PLLSAI1_R                              | NA
-  *-----------------------------------------------------------------------------
-  *        PLLSAI2_P                              | NA
-  *-----------------------------------------------------------------------------
-  *        PLLSAI2_Q                              | NA
-  *-----------------------------------------------------------------------------
-  *        PLLSAI2_R                              | NA
-  *-----------------------------------------------------------------------------
-  *        Require 48MHz for USB OTG FS,          | Disabled
-  *        SDIO and RNG clock                     |
-  *-----------------------------------------------------------------------------
-  *=============================================================================
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Apache License, Version 2.0,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/Apache-2.0
-  *
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32l4xx_system
-  * @{
-  */
-
-/** @addtogroup STM32L4xx_System_Private_Includes
-  * @{
-  */
-
-#include "stm32l4xx.h"
-
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    8000000U  /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (MSI_VALUE)
-  #define MSI_VALUE    4000000U  /*!< Value of the Internal oscillator in Hz*/
-#endif /* MSI_VALUE */
-
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    16000000U /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32L4xx_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32L4xx_System_Private_Defines
-  * @{
-  */
-
-/************************* Miscellaneous Configuration ************************/
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */
-/* #define VECT_TAB_SRAM */
-
-#ifdef NO_BOOTLOADER
-#define VECT_TAB_OFFSET  0x0000 /*!< Vector Table base offset field.
-                                   This value must be a multiple of 0x200. */
-#else
-#define VECT_TAB_OFFSET  0x8000 /*!< Vector Table base offset field.
-                                   This value must be a multiple of 0x200. */
-#endif
-
-    /******************************************************************************/
-    /**
-  * @}
-  */
-
-    /** @addtogroup STM32L4xx_System_Private_Macros
-  * @{
-  */
-
-    /**
-  * @}
-  */
-
-    /** @addtogroup STM32L4xx_System_Private_Variables
-  * @{
-  */
-    /* The SystemCoreClock variable is updated in three ways:
-      1) by calling CMSIS function SystemCoreClockUpdate()
-      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
-      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
-         Note: If you use this function to configure the system clock; then there
-               is no need to call the 2 first functions listed above, since SystemCoreClock
-               variable is updated automatically.
-  */
-    uint32_t SystemCoreClock = 4000000U;
-
-  const uint8_t  AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
-  const uint8_t  APBPrescTable[8] =  {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
-  const uint32_t MSIRangeTable[12] = {100000U,   200000U,   400000U,   800000U,  1000000U,  2000000U, \
-                                      4000000U, 8000000U, 16000000U, 24000000U, 32000000U, 48000000U};
-/**
-  * @}
-  */
-
-/** @addtogroup STM32L4xx_System_Private_FunctionPrototypes
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32L4xx_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system.
-  * @param  None
-  * @retval None
-  */
-
-void SystemInit(void)
-{
-  /* FPU settings ------------------------------------------------------------*/
-  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
-    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
-  #endif
-
-  /* Reset the RCC clock configuration to the default reset state ------------*/
-  /* Set MSION bit */
-  RCC->CR |= RCC_CR_MSION;
-
-  /* Reset CFGR register */
-  RCC->CFGR = 0x00000000U;
-
-  /* Reset HSEON, CSSON , HSION, and PLLON bits */
-  RCC->CR &= 0xEAF6FFFFU;
-
-  /* Reset PLLCFGR register */
-  RCC->PLLCFGR = 0x00001000U;
-
-  /* Reset HSEBYP bit */
-  RCC->CR &= 0xFFFBFFFFU;
-
-  /* Disable all interrupts */
-  RCC->CIER = 0x00000000U;
-
-  /* Configure the Vector Table location add offset address ------------------*/
-#ifdef VECT_TAB_SRAM
-  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
-#else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
-#endif
-}
-
-/**
-  * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock (HCLK), it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *
-  * @note   Each time the core clock (HCLK) changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.
-  *
-  * @note   - The system frequency computed by this function is not the real
-  *           frequency in the chip. It is calculated based on the predefined
-  *           constant and the selected clock source:
-  *
-  *           - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*)
-  *
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
-  *
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
-  *
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
-  *             or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors.
-  *
-  *         (*) MSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
-  *             4 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.
-  *
-  *         (**) HSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value
-  *              16 MHz) but the real value may vary depending on the variations
-  *              in voltage and temperature.
-  *
-  *         (***) HSE_VALUE is a constant defined in stm32l4xx_hal.h file (default value
-  *              8 MHz), user has to ensure that HSE_VALUE is same as the real
-  *              frequency of the crystal used. Otherwise, this function may
-  *              have wrong result.
-  *
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  *
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate(void)
-{
-  uint32_t tmp = 0U, msirange = 0U, pllvco = 0U, pllr = 2U, pllsource = 0U, pllm = 2U;
-
-  /* Get MSI Range frequency--------------------------------------------------*/
-  if((RCC->CR & RCC_CR_MSIRGSEL) == RESET)
-  { /* MSISRANGE from RCC_CSR applies */
-    msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8U;
-  }
-  else
-  { /* MSIRANGE from RCC_CR applies */
-    msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4U;
-  }
-  /*MSI frequency range in HZ*/
-  msirange = MSIRangeTable[msirange];
-
-  /* Get SYSCLK source -------------------------------------------------------*/
-  switch (RCC->CFGR & RCC_CFGR_SWS)
-  {
-    case 0x00:  /* MSI used as system clock source */
-      SystemCoreClock = msirange;
-      break;
-
-    case 0x04:  /* HSI used as system clock source */
-      SystemCoreClock = HSI_VALUE;
-      break;
-
-    case 0x08:  /* HSE used as system clock source */
-      SystemCoreClock = HSE_VALUE;
-      break;
-
-    case 0x0C:  /* PLL used as system clock  source */
-      /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
-         SYSCLK = PLL_VCO / PLLR
-         */
-      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
-      pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4U) + 1U ;
-
-      switch (pllsource)
-      {
-        case 0x02:  /* HSI used as PLL clock source */
-          pllvco = (HSI_VALUE / pllm);
-          break;
-
-        case 0x03:  /* HSE used as PLL clock source */
-          pllvco = (HSE_VALUE / pllm);
-          break;
-
-        default:    /* MSI used as PLL clock source */
-          pllvco = (msirange / pllm);
-          break;
-      }
-      pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8U);
-      pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25U) + 1U) * 2U;
-      SystemCoreClock = pllvco/pllr;
-      break;
-
-    default:
-      SystemCoreClock = msirange;
-      break;
-  }
-  /* Compute HCLK clock frequency --------------------------------------------*/
-  /* Get HCLK prescaler */
-  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
-  /* HCLK clock frequency */
-  SystemCoreClock >>= tmp;
-}
-
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/tim.c

@@ -1,416 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : TIM.c
-  * Description        : This file provides code for the configuration
-  *                      of the TIM instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "tim.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-TIM_HandleTypeDef htim2;
-TIM_HandleTypeDef htim5;
-TIM_HandleTypeDef htim8;
-TIM_HandleTypeDef htim15;
-
-/* TIM2 init function */
-void MX_TIM2_Init(void)
-{
-  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
-  TIM_MasterConfigTypeDef sMasterConfig = {0};
-  TIM_OC_InitTypeDef sConfigOC = {0};
-
-  htim2.Instance = TIM2;
-  htim2.Init.Prescaler = 0;
-  htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
-  htim2.Init.Period = 1684;
-  htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-  htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
-  if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
-  if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
-  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-  if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sConfigOC.OCMode = TIM_OCMODE_PWM1;
-  sConfigOC.Pulse = 842;
-  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
-  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
-  if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  HAL_TIM_MspPostInit(&htim2);
-
-}
-/* TIM5 init function */
-void MX_TIM5_Init(void)
-{
-  TIM_MasterConfigTypeDef sMasterConfig = {0};
-  TIM_OC_InitTypeDef sConfigOC = {0};
-
-  htim5.Instance = TIM5;
-  htim5.Init.Prescaler = 500 - 1;
-  htim5.Init.CounterMode = TIM_COUNTERMODE_UP;
-  htim5.Init.Period = 291;
-  htim5.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-  htim5.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-  if (HAL_TIM_PWM_Init(&htim5) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
-  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-  if (HAL_TIMEx_MasterConfigSynchronization(&htim5, &sMasterConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sConfigOC.OCMode = TIM_OCMODE_PWM1;
-  sConfigOC.Pulse = 145;
-  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
-  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
-  if (HAL_TIM_PWM_ConfigChannel(&htim5, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  HAL_TIM_MspPostInit(&htim5);
-
-}
-/* TIM8 init function */
-void MX_TIM8_Init(void)
-{
-  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
-  TIM_MasterConfigTypeDef sMasterConfig = {0};
-  TIM_IC_InitTypeDef sConfigIC = {0};
-
-  htim8.Instance = TIM8;
-  htim8.Init.Prescaler = 64-1;
-  htim8.Init.CounterMode = TIM_COUNTERMODE_UP;
-  htim8.Init.Period = 32768-1;
-  htim8.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-  htim8.Init.RepetitionCounter = 0;
-  htim8.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-  if (HAL_TIM_Base_Init(&htim8) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
-  if (HAL_TIM_ConfigClockSource(&htim8, &sClockSourceConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  if (HAL_TIM_IC_Init(&htim8) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
-  sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
-  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-  if (HAL_TIMEx_MasterConfigSynchronization(&htim8, &sMasterConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sConfigIC.ICPolarity = TIM_INPUTCHANNELPOLARITY_BOTHEDGE;
-  sConfigIC.ICSelection = TIM_ICSELECTION_DIRECTTI;
-  sConfigIC.ICPrescaler = TIM_ICPSC_DIV1;
-  sConfigIC.ICFilter = 0;
-  if (HAL_TIM_IC_ConfigChannel(&htim8, &sConfigIC, TIM_CHANNEL_2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-/* TIM15 init function */
-void MX_TIM15_Init(void)
-{
-  TIM_MasterConfigTypeDef sMasterConfig = {0};
-  TIM_OC_InitTypeDef sConfigOC = {0};
-  TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
-
-  htim15.Instance = TIM15;
-  htim15.Init.Prescaler = 16 - 1;
-  htim15.Init.CounterMode = TIM_COUNTERMODE_UP;
-  htim15.Init.Period = 32-1;
-  htim15.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-  htim15.Init.RepetitionCounter = 0;
-  htim15.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-  if (HAL_TIM_OC_Init(&htim15) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
-  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-  if (HAL_TIMEx_MasterConfigSynchronization(&htim15, &sMasterConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sConfigOC.OCMode = TIM_OCMODE_TIMING;
-  sConfigOC.Pulse = 0;
-  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
-  sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
-  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
-  sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
-  sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-  if (HAL_TIM_OC_ConfigChannel(&htim15, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
-  sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
-  sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
-  sBreakDeadTimeConfig.DeadTime = 0;
-  sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
-  sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
-  sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
-  if (HAL_TIMEx_ConfigBreakDeadTime(&htim15, &sBreakDeadTimeConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  HAL_TIM_MspPostInit(&htim15);
-
-}
-
-void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(tim_baseHandle->Instance==TIM2)
-  {
-  /* USER CODE BEGIN TIM2_MspInit 0 */
-
-  /* USER CODE END TIM2_MspInit 0 */
-    /* TIM2 clock enable */
-    __HAL_RCC_TIM2_CLK_ENABLE();
-  /* USER CODE BEGIN TIM2_MspInit 1 */
-
-  /* USER CODE END TIM2_MspInit 1 */
-  }
-  else if(tim_baseHandle->Instance==TIM8)
-  {
-  /* USER CODE BEGIN TIM8_MspInit 0 */
-
-  /* USER CODE END TIM8_MspInit 0 */
-    /* TIM8 clock enable */
-    __HAL_RCC_TIM8_CLK_ENABLE();
-
-    __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**TIM8 GPIO Configuration
-    PC7     ------> TIM8_CH2
-    */
-    GPIO_InitStruct.Pin = iButton_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM;
-    GPIO_InitStruct.Alternate = GPIO_AF3_TIM8;
-    HAL_GPIO_Init(iButton_GPIO_Port, &GPIO_InitStruct);
-
-    /* TIM8 interrupt Init */
-    HAL_NVIC_SetPriority(TIM8_CC_IRQn, 5, 0);
-    HAL_NVIC_EnableIRQ(TIM8_CC_IRQn);
-  /* USER CODE BEGIN TIM8_MspInit 1 */
-
-  /* USER CODE END TIM8_MspInit 1 */
-  }
-}
-
-void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef* tim_pwmHandle)
-{
-
-  if(tim_pwmHandle->Instance==TIM5)
-  {
-  /* USER CODE BEGIN TIM5_MspInit 0 */
-
-  /* USER CODE END TIM5_MspInit 0 */
-    /* TIM5 clock enable */
-    __HAL_RCC_TIM5_CLK_ENABLE();
-  /* USER CODE BEGIN TIM5_MspInit 1 */
-
-  /* USER CODE END TIM5_MspInit 1 */
-  }
-}
-
-void HAL_TIM_OC_MspInit(TIM_HandleTypeDef* tim_ocHandle)
-{
-
-  if(tim_ocHandle->Instance==TIM15)
-  {
-  /* USER CODE BEGIN TIM15_MspInit 0 */
-
-  /* USER CODE END TIM15_MspInit 0 */
-    /* TIM15 clock enable */
-    __HAL_RCC_TIM15_CLK_ENABLE();
-  /* USER CODE BEGIN TIM15_MspInit 1 */
-
-  /* USER CODE END TIM15_MspInit 1 */
-  }
-}
-void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(timHandle->Instance==TIM2)
-  {
-  /* USER CODE BEGIN TIM2_MspPostInit 0 */
-
-  /* USER CODE END TIM2_MspPostInit 0 */
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**TIM2 GPIO Configuration
-    PB11     ------> TIM2_CH4
-    */
-    GPIO_InitStruct.Pin = IR_TX_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
-    HAL_GPIO_Init(IR_TX_GPIO_Port, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN TIM2_MspPostInit 1 */
-
-  /* USER CODE END TIM2_MspPostInit 1 */
-  }
-  else if(timHandle->Instance==TIM5)
-  {
-  /* USER CODE BEGIN TIM5_MspPostInit 0 */
-
-  /* USER CODE END TIM5_MspPostInit 0 */
-
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**TIM5 GPIO Configuration
-    PA3     ------> TIM5_CH4
-    */
-    GPIO_InitStruct.Pin = SPEAKER_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF2_TIM5;
-    HAL_GPIO_Init(SPEAKER_GPIO_Port, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN TIM5_MspPostInit 1 */
-
-  /* USER CODE END TIM5_MspPostInit 1 */
-  }
-  else if(timHandle->Instance==TIM15)
-  {
-  /* USER CODE BEGIN TIM15_MspPostInit 0 */
-
-  /* USER CODE END TIM15_MspPostInit 0 */
-
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**TIM15 GPIO Configuration
-    PB13     ------> TIM15_CH1N
-    */
-    GPIO_InitStruct.Pin = RFID_OUT_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF14_TIM15;
-    HAL_GPIO_Init(RFID_OUT_GPIO_Port, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN TIM15_MspPostInit 1 */
-
-  /* USER CODE END TIM15_MspPostInit 1 */
-  }
-
-}
-
-void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
-{
-
-  if(tim_baseHandle->Instance==TIM2)
-  {
-  /* USER CODE BEGIN TIM2_MspDeInit 0 */
-
-  /* USER CODE END TIM2_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_TIM2_CLK_DISABLE();
-  /* USER CODE BEGIN TIM2_MspDeInit 1 */
-
-  /* USER CODE END TIM2_MspDeInit 1 */
-  }
-  else if(tim_baseHandle->Instance==TIM8)
-  {
-  /* USER CODE BEGIN TIM8_MspDeInit 0 */
-
-  /* USER CODE END TIM8_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_TIM8_CLK_DISABLE();
-
-    /**TIM8 GPIO Configuration
-    PC7     ------> TIM8_CH2
-    */
-    HAL_GPIO_DeInit(iButton_GPIO_Port, iButton_Pin);
-
-    /* TIM8 interrupt Deinit */
-    HAL_NVIC_DisableIRQ(TIM8_CC_IRQn);
-  /* USER CODE BEGIN TIM8_MspDeInit 1 */
-
-  /* USER CODE END TIM8_MspDeInit 1 */
-  }
-}
-
-void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef* tim_pwmHandle)
-{
-
-  if(tim_pwmHandle->Instance==TIM5)
-  {
-  /* USER CODE BEGIN TIM5_MspDeInit 0 */
-
-  /* USER CODE END TIM5_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_TIM5_CLK_DISABLE();
-  /* USER CODE BEGIN TIM5_MspDeInit 1 */
-
-  /* USER CODE END TIM5_MspDeInit 1 */
-  }
-}
-
-void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef* tim_ocHandle)
-{
-
-  if(tim_ocHandle->Instance==TIM15)
-  {
-  /* USER CODE BEGIN TIM15_MspDeInit 0 */
-
-  /* USER CODE END TIM15_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_TIM15_CLK_DISABLE();
-  /* USER CODE BEGIN TIM15_MspDeInit 1 */
-
-  /* USER CODE END TIM15_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/usart.c

@@ -1,108 +0,0 @@
-/**
-  ******************************************************************************
-  * File Name          : USART.c
-  * Description        : This file provides code for the configuration
-  *                      of the USART instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usart.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-UART_HandleTypeDef huart1;
-
-/* USART1 init function */
-
-void MX_USART1_UART_Init(void)
-{
-
-  huart1.Instance = USART1;
-  huart1.Init.BaudRate = 115200;
-  huart1.Init.WordLength = UART_WORDLENGTH_8B;
-  huart1.Init.StopBits = UART_STOPBITS_1;
-  huart1.Init.Parity = UART_PARITY_NONE;
-  huart1.Init.Mode = UART_MODE_TX_RX;
-  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
-  huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
-  huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
-  if (HAL_UART_Init(&huart1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(uartHandle->Instance==USART1)
-  {
-  /* USER CODE BEGIN USART1_MspInit 0 */
-
-  /* USER CODE END USART1_MspInit 0 */
-    /* USART1 clock enable */
-    __HAL_RCC_USART1_CLK_ENABLE();
-
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART1 GPIO Configuration
-    PA9     ------> USART1_TX
-    PA10     ------> USART1_RX
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN USART1_MspInit 1 */
-
-  /* USER CODE END USART1_MspInit 1 */
-  }
-}
-
-void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
-{
-
-  if(uartHandle->Instance==USART1)
-  {
-  /* USER CODE BEGIN USART1_MspDeInit 0 */
-
-  /* USER CODE END USART1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_USART1_CLK_DISABLE();
-
-    /**USART1 GPIO Configuration
-    PA9     ------> USART1_TX
-    PA10     ------> USART1_RX
-    */
-    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
-
-  /* USER CODE BEGIN USART1_MspDeInit 1 */
-
-  /* USER CODE END USART1_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/usb_device.c

@@ -1,102 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usb_device.c
-  * @version        : v2.0_Cube
-  * @brief          : This file implements the USB Device
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-
-#include "usb_device.h"
-#include "usbd_core.h"
-#include "usbd_desc.h"
-#include "usbd_cdc.h"
-#include "usbd_cdc_if.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* USER CODE BEGIN PV */
-/* Private variables ---------------------------------------------------------*/
-
-/* USER CODE END PV */
-
-/* USER CODE BEGIN PFP */
-/* Private function prototypes -----------------------------------------------*/
-
-/* USER CODE END PFP */
-
-/* USB Device Core handle declaration. */
-USBD_HandleTypeDef hUsbDeviceFS;
-extern USBD_DescriptorsTypeDef FS_Desc;
-
-/*
- * -- Insert your variables declaration here --
- */
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/*
- * -- Insert your external function declaration here --
- */
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/**
-  * Init USB device Library, add supported class and start the library
-  * @retval None
-  */
-void MX_USB_DEVICE_Init(void)
-{
-  /* USER CODE BEGIN USB_DEVICE_Init_PreTreatment */
-
-  /* USER CODE END USB_DEVICE_Init_PreTreatment */
-
-  /* Init Device Library, add supported class and start the library. */
-  if (USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS) != USBD_OK)
-  {
-    Error_Handler();
-  }
-  if (USBD_RegisterClass(&hUsbDeviceFS, &USBD_CDC) != USBD_OK)
-  {
-    Error_Handler();
-  }
-  if (USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS) != USBD_OK)
-  {
-    Error_Handler();
-  }
-  if (USBD_Start(&hUsbDeviceFS) != USBD_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN USB_DEVICE_Init_PostTreatment */
-
-  /* USER CODE END USB_DEVICE_Init_PostTreatment */
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/usbd_cdc_if.c

@@ -1,311 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usbd_cdc_if.c
-  * @version        : v2.0_Cube
-  * @brief          : Usb device for Virtual Com Port.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_cdc_if.h"
-
-/* USER CODE BEGIN INCLUDE */
-
-/* USER CODE END INCLUDE */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-
-/* USER CODE BEGIN PV */
-/* Private variables ---------------------------------------------------------*/
-
-/* USER CODE END PV */
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
-  * @brief Usb device library.
-  * @{
-  */
-
-/** @addtogroup USBD_CDC_IF
-  * @{
-  */
-
-/** @defgroup USBD_CDC_IF_Private_TypesDefinitions USBD_CDC_IF_Private_TypesDefinitions
-  * @brief Private types.
-  * @{
-  */
-
-/* USER CODE BEGIN PRIVATE_TYPES */
-
-extern void _api_hal_vcp_init();
-extern void _api_hal_vcp_deinit();
-extern void _api_hal_vcp_control_line(uint8_t state);
-extern void _api_hal_vcp_rx_callback(char* buffer, size_t size);
-extern void _api_hal_vcp_tx_complete(size_t size);
-
-/* USER CODE END PRIVATE_TYPES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Private_Defines USBD_CDC_IF_Private_Defines
-  * @brief Private defines.
-  * @{
-  */
-
-/* USER CODE BEGIN PRIVATE_DEFINES */
-/* USER CODE END PRIVATE_DEFINES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Private_Macros USBD_CDC_IF_Private_Macros
-  * @brief Private macros.
-  * @{
-  */
-
-/* USER CODE BEGIN PRIVATE_MACRO */
-
-/* USER CODE END PRIVATE_MACRO */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Private_Variables USBD_CDC_IF_Private_Variables
-  * @brief Private variables.
-  * @{
-  */
-/* Create buffer for reception and transmission           */
-/* It's up to user to redefine and/or remove those define */
-/** Received data over USB are stored in this buffer      */
-uint8_t UserRxBufferFS[APP_RX_DATA_SIZE];
-
-/** Data to send over USB CDC are stored in this buffer   */
-uint8_t UserTxBufferFS[APP_TX_DATA_SIZE];
-
-/* USER CODE BEGIN PRIVATE_VARIABLES */
-
-/* USER CODE END PRIVATE_VARIABLES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
-  * @brief Public variables.
-  * @{
-  */
-
-extern USBD_HandleTypeDef hUsbDeviceFS;
-
-/* USER CODE BEGIN EXPORTED_VARIABLES */
-
-/* USER CODE END EXPORTED_VARIABLES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Private_FunctionPrototypes USBD_CDC_IF_Private_FunctionPrototypes
-  * @brief Private functions declaration.
-  * @{
-  */
-
-static int8_t CDC_Init_FS(void);
-static int8_t CDC_DeInit_FS(void);
-static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length);
-static int8_t CDC_Receive_FS(uint8_t* pbuf, uint32_t *Len);
-static int8_t CDC_TransmitCplt_FS(uint8_t *pbuf, uint32_t *Len, uint8_t epnum);
-
-/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */
-
-/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */
-
-/**
-  * @}
-  */
-
-USBD_CDC_ItfTypeDef USBD_Interface_fops_FS =
-{
-  CDC_Init_FS,
-  CDC_DeInit_FS,
-  CDC_Control_FS,
-  CDC_Receive_FS,
-  CDC_TransmitCplt_FS
-};
-
-/* Private functions ---------------------------------------------------------*/
-/**
-  * @brief  Initializes the CDC media low layer over the FS USB IP
-  * @retval USBD_OK if all operations are OK else USBD_FAIL
-  */
-static int8_t CDC_Init_FS(void)
-{
-  /* USER CODE BEGIN 3 */
-  /* Set Application Buffers */
-  USBD_CDC_SetTxBuffer(&hUsbDeviceFS, UserTxBufferFS, 0);
-  USBD_CDC_SetRxBuffer(&hUsbDeviceFS, UserRxBufferFS);
-  _api_hal_vcp_init();
-  return (USBD_OK);
-  /* USER CODE END 3 */
-}
-
-/**
-  * @brief  DeInitializes the CDC media low layer
-  * @retval USBD_OK if all operations are OK else USBD_FAIL
-  */
-static int8_t CDC_DeInit_FS(void)
-{
-  /* USER CODE BEGIN 4 */
-  _api_hal_vcp_deinit();
-  return (USBD_OK);
-  /* USER CODE END 4 */
-}
-
-/**
-  * @brief  Manage the CDC class requests
-  * @param  cmd: Command code
-  * @param  pbuf: Buffer containing command data (request parameters)
-  * @param  length: Number of data to be sent (in bytes)
-  * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
-  */
-static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length)
-{
-  /* USER CODE BEGIN 5 */
-  if (cmd == CDC_SEND_ENCAPSULATED_COMMAND) {
-  } else if (cmd == CDC_GET_ENCAPSULATED_RESPONSE) {
-  } else if (cmd == CDC_SET_COMM_FEATURE) {
-  } else if (cmd == CDC_GET_COMM_FEATURE) {
-  } else if (cmd == CDC_CLEAR_COMM_FEATURE) {
-  } else if (cmd == CDC_SET_LINE_CODING) {
-      /*******************************************************************************/
-      /* Line Coding Structure                                                       */
-      /*-----------------------------------------------------------------------------*/
-      /* Offset | Field       | Size | Value  | Description                          */
-      /* 0      | dwDTERate   |   4  | Number |Data terminal rate, in bits per second*/
-      /* 4      | bCharFormat |   1  | Number | Stop bits                            */
-      /*                                        0 - 1 Stop bit                       */
-      /*                                        1 - 1.5 Stop bits                    */
-      /*                                        2 - 2 Stop bits                      */
-      /* 5      | bParityType |  1   | Number | Parity                               */
-      /*                                        0 - None                             */
-      /*                                        1 - Odd                              */
-      /*                                        2 - Even                             */
-      /*                                        3 - Mark                             */
-      /*                                        4 - Space                            */
-      /* 6      | bDataBits  |   1   | Number Data bits (5, 6, 7, 8 or 16).          */
-      /*******************************************************************************/
-  } else if (cmd == CDC_GET_LINE_CODING) {
-  } else if (cmd == CDC_SET_CONTROL_LINE_STATE) {
-    _api_hal_vcp_control_line(((USBD_SetupReqTypedef*)pbuf)->wValue);
-  } else if (cmd == CDC_SEND_BREAK) {
-  } else {
-  }
-
-  return (USBD_OK);
-  /* USER CODE END 5 */
-}
-
-/**
-  * @brief  Data received over USB OUT endpoint are sent over CDC interface
-  *         through this function.
-  *
-  *         @note
-  *         This function will issue a NAK packet on any OUT packet received on
-  *         USB endpoint until exiting this function. If you exit this function
-  *         before transfer is complete on CDC interface (ie. using DMA controller)
-  *         it will result in receiving more data while previous ones are still
-  *         not sent.
-  *
-  * @param  Buf: Buffer of data to be received
-  * @param  Len: Number of data received (in bytes)
-  * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
-  */
-static int8_t CDC_Receive_FS(uint8_t* Buf, uint32_t *Len)
-{
-  /* USER CODE BEGIN 6 */
-  _api_hal_vcp_rx_callback((char*)Buf, *Len);
-  USBD_CDC_ReceivePacket(&hUsbDeviceFS);
-  return (USBD_OK);
-  /* USER CODE END 6 */
-}
-
-/**
-  * @brief  CDC_Transmit_FS
-  *         Data to send over USB IN endpoint are sent over CDC interface
-  *         through this function.
-  *         @note
-  *
-  *
-  * @param  Buf: Buffer of data to be sent
-  * @param  Len: Number of data to be sent (in bytes)
-  * @retval USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY
-  */
-uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len)
-{
-  uint8_t result = USBD_OK;
-  /* USER CODE BEGIN 7 */
-  USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*)hUsbDeviceFS.pClassData;
-  if (hcdc->TxState != 0){
-    return USBD_BUSY;
-  }
-  memcpy(UserTxBufferFS, Buf, Len);
-  USBD_CDC_SetTxBuffer(&hUsbDeviceFS, UserTxBufferFS, Len);
-  result = USBD_CDC_TransmitPacket(&hUsbDeviceFS);
-  /* USER CODE END 7 */
-  return result;
-}
-
-/**
-  * @brief  CDC_TransmitCplt_FS
-  *         Data transmited callback
-  *
-  *         @note
-  *         This function is IN transfer complete callback used to inform user that
-  *         the submitted Data is successfully sent over USB.
-  *
-  * @param  Buf: Buffer of data to be received
-  * @param  Len: Number of data received (in bytes)
-  * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
-  */
-static int8_t CDC_TransmitCplt_FS(uint8_t *Buf, uint32_t *Len, uint8_t epnum)
-{
-  uint8_t result = USBD_OK;
-  /* USER CODE BEGIN 13 */
-  UNUSED(Buf);
-  UNUSED(epnum);
-  _api_hal_vcp_tx_complete(*Len);
-  /* USER CODE END 13 */
-  return result;
-}
-
-/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
-
-/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/usbd_conf.c

@@ -1,873 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usbd_conf.c
-  * @version        : v2.0_Cube
-  * @brief          : This file implements the board support package for the USB device library
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l4xx.h"
-#include "stm32l4xx_hal.h"
-#include "usbd_def.h"
-#include "usbd_core.h"
-#include "usbd_cdc.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-
-/* USER CODE BEGIN PV */
-/* Private variables ---------------------------------------------------------*/
-
-/* USER CODE END PV */
-
-PCD_HandleTypeDef hpcd_USB_OTG_FS;
-void Error_Handler(void);
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/* Exported function prototypes ----------------------------------------------*/
-extern USBD_StatusTypeDef USBD_LL_BatteryCharging(USBD_HandleTypeDef *pdev);
-
-/* USER CODE BEGIN PFP */
-/* Private function prototypes -----------------------------------------------*/
-
-/* USER CODE END PFP */
-
-/* Private functions ---------------------------------------------------------*/
-
-/* USER CODE BEGIN 1 */
-static void SystemClockConfig_Resume(void);
-
-/* USER CODE END 1 */
-extern void SystemClock_Config(void);
-
-/*******************************************************************************
-                       LL Driver Callbacks (PCD -> USB Device Library)
-*******************************************************************************/
-/* MSP Init */
-
-void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
-{
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(pcdHandle->Instance==USB_OTG_FS)
-  {
-  /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
-
-  /* USER CODE END USB_OTG_FS_MspInit 0 */
-
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USB_OTG_FS GPIO Configuration
-    PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-    /* Peripheral clock enable */
-    __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
-
-    /* Enable VDDUSB */
-    if(__HAL_RCC_PWR_IS_CLK_DISABLED())
-    {
-      __HAL_RCC_PWR_CLK_ENABLE();
-      HAL_PWREx_EnableVddUSB();
-      __HAL_RCC_PWR_CLK_DISABLE();
-    }
-    else
-    {
-      HAL_PWREx_EnableVddUSB();
-    }
-
-    /* Peripheral interrupt init */
-    HAL_NVIC_SetPriority(OTG_FS_IRQn, 5, 0);
-    HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
-  /* USER CODE BEGIN USB_OTG_FS_MspInit 1 */
-
-  /* USER CODE END USB_OTG_FS_MspInit 1 */
-  }
-}
-
-void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
-{
-  if(pcdHandle->Instance==USB_OTG_FS)
-  {
-  /* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */
-
-  /* USER CODE END USB_OTG_FS_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
-
-    /**USB_OTG_FS GPIO Configuration
-    PA11     ------> USB_OTG_FS_DM
-    PA12     ------> USB_OTG_FS_DP
-    */
-    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
-
-    /* Disable VDDUSB */
-    if(__HAL_RCC_PWR_IS_CLK_DISABLED())
-    {
-      __HAL_RCC_PWR_CLK_ENABLE();
-      HAL_PWREx_DisableVddUSB();
-      __HAL_RCC_PWR_CLK_DISABLE();
-    }
-    else
-    {
-      HAL_PWREx_DisableVddUSB();
-    }
-
-    /* Peripheral interrupt Deinit*/
-    HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
-
-  /* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
-
-  /* USER CODE END USB_OTG_FS_MspDeInit 1 */
-  }
-}
-
-/**
-  * @brief  Setup stage callback
-  * @param  hpcd: PCD handle
-  * @retval None
-  */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-static void PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
-#else
-void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
-  USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
-}
-
-/**
-  * @brief  Data Out stage callback.
-  * @param  hpcd: PCD handle
-  * @param  epnum: Endpoint number
-  * @retval None
-  */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-static void PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-#else
-void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
-  USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
-}
-
-/**
-  * @brief  Data In stage callback.
-  * @param  hpcd: PCD handle
-  * @param  epnum: Endpoint number
-  * @retval None
-  */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-static void PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-#else
-void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
-  USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
-}
-
-/**
-  * @brief  SOF callback.
-  * @param  hpcd: PCD handle
-  * @retval None
-  */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-static void PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
-#else
-void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
-  USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/**
-  * @brief  Reset callback.
-  * @param  hpcd: PCD handle
-  * @retval None
-  */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-static void PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
-#else
-void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
-  USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
-
-  if ( hpcd->Init.speed != PCD_SPEED_FULL)
-  {
-    Error_Handler();
-  }
-    /* Set Speed. */
-  USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed);
-
-  /* Reset Device. */
-  USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/**
-  * @brief  Suspend callback.
-  * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
-  * @param  hpcd: PCD handle
-  * @retval None
-  */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-static void PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
-#else
-void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
-  __HAL_PCD_GATE_PHYCLOCK(hpcd);
-  /* Inform USB library that core enters in suspend Mode. */
-  USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
-  /* Enter in STOP mode. */
-  /* USER CODE BEGIN 2 */
-  if (hpcd->Init.low_power_enable)
-  {
-    /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
-    SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
-  }
-  /* USER CODE END 2 */
-}
-
-/**
-  * @brief  Resume callback.
-  * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
-  * @param  hpcd: PCD handle
-  * @retval None
-  */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-static void PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
-#else
-void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
-  __HAL_PCD_UNGATE_PHYCLOCK(hpcd);
-
-  /* USER CODE BEGIN 3 */
-  if (hpcd->Init.low_power_enable)
-  {
-    /* Reset SLEEPDEEP bit of Cortex System Control Register. */
-    SCB->SCR &= (uint32_t)~((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
-    SystemClockConfig_Resume();
-  }
-  /* USER CODE END 3 */
-  USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/**
-  * @brief  ISOOUTIncomplete callback.
-  * @param  hpcd: PCD handle
-  * @param  epnum: Endpoint number
-  * @retval None
-  */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-static void PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-#else
-void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
-  USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
-}
-
-/**
-  * @brief  ISOINIncomplete callback.
-  * @param  hpcd: PCD handle
-  * @param  epnum: Endpoint number
-  * @retval None
-  */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-static void PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-#else
-void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
-  USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
-}
-
-/**
-  * @brief  Connect callback.
-  * @param  hpcd: PCD handle
-  * @retval None
-  */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-static void PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
-#else
-void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
-  USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/**
-  * @brief  Disconnect callback.
-  * @param  hpcd: PCD handle
-  * @retval None
-  */
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-static void PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
-#else
-void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-{
-  USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
-}
-
-/*******************************************************************************
-                       LL Driver Interface (USB Device Library --> PCD)
-*******************************************************************************/
-
-/**
-  * @brief  Initializes the low level portion of the device driver.
-  * @param  pdev: Device handle
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
-{
-  /* Init USB Ip. */
-  if (pdev->id == DEVICE_FS) {
-  /* Enable USB power on Pwrctrl CR2 register. */
-  /* Link the driver to the stack. */
-  hpcd_USB_OTG_FS.pData = pdev;
-  pdev->pData = &hpcd_USB_OTG_FS;
-
-  hpcd_USB_OTG_FS.Instance = USB_OTG_FS;
-  hpcd_USB_OTG_FS.Init.dev_endpoints = 6;
-  hpcd_USB_OTG_FS.Init.speed = PCD_SPEED_FULL;
-  hpcd_USB_OTG_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
-  hpcd_USB_OTG_FS.Init.Sof_enable = DISABLE;
-  hpcd_USB_OTG_FS.Init.low_power_enable = DISABLE;
-  hpcd_USB_OTG_FS.Init.lpm_enable = DISABLE;
-  hpcd_USB_OTG_FS.Init.battery_charging_enable = DISABLE;
-  hpcd_USB_OTG_FS.Init.use_dedicated_ep1 = DISABLE;
-  hpcd_USB_OTG_FS.Init.vbus_sensing_enable = DISABLE;
-  if (HAL_PCD_Init(&hpcd_USB_OTG_FS) != HAL_OK)
-  {
-    Error_Handler( );
-  }
-
-#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
-  /* Register USB PCD CallBacks */
-  HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_SOF_CB_ID, PCD_SOFCallback);
-  HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_SETUPSTAGE_CB_ID, PCD_SetupStageCallback);
-  HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_RESET_CB_ID, PCD_ResetCallback);
-  HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_SUSPEND_CB_ID, PCD_SuspendCallback);
-  HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_RESUME_CB_ID, PCD_ResumeCallback);
-  HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_CONNECT_CB_ID, PCD_ConnectCallback);
-  HAL_PCD_RegisterCallback(&hpcd_USB_OTG_FS, HAL_PCD_DISCONNECT_CB_ID, PCD_DisconnectCallback);
-
-  HAL_PCD_RegisterDataOutStageCallback(&hpcd_USB_OTG_FS, PCD_DataOutStageCallback);
-  HAL_PCD_RegisterDataInStageCallback(&hpcd_USB_OTG_FS, PCD_DataInStageCallback);
-  HAL_PCD_RegisterIsoOutIncpltCallback(&hpcd_USB_OTG_FS, PCD_ISOOUTIncompleteCallback);
-  HAL_PCD_RegisterIsoInIncpltCallback(&hpcd_USB_OTG_FS, PCD_ISOINIncompleteCallback);
-#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
-  HAL_PCDEx_SetRxFiFo(&hpcd_USB_OTG_FS, 0x80);
-  HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 0, 0x40);
-  HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 1, 0x80);
-  }
-  return USBD_OK;
-}
-
-/**
-  * @brief  De-Initializes the low level portion of the device driver.
-  * @param  pdev: Device handle
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
-{
-  HAL_StatusTypeDef hal_status = HAL_OK;
-  USBD_StatusTypeDef usb_status = USBD_OK;
-
-  hal_status = HAL_PCD_DeInit(pdev->pData);
-
-  switch (hal_status) {
-    case HAL_OK :
-      usb_status = USBD_OK;
-    break;
-    case HAL_ERROR :
-      usb_status = USBD_FAIL;
-    break;
-    case HAL_BUSY :
-      usb_status = USBD_BUSY;
-    break;
-    case HAL_TIMEOUT :
-      usb_status = USBD_FAIL;
-    break;
-    default :
-      usb_status = USBD_FAIL;
-    break;
-  }
-  return usb_status;
-}
-
-/**
-  * @brief  Starts the low level portion of the device driver.
-  * @param  pdev: Device handle
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
-{
-  HAL_StatusTypeDef hal_status = HAL_OK;
-  USBD_StatusTypeDef usb_status = USBD_OK;
-
-  hal_status = HAL_PCD_Start(pdev->pData);
-
-  switch (hal_status) {
-    case HAL_OK :
-      usb_status = USBD_OK;
-    break;
-    case HAL_ERROR :
-      usb_status = USBD_FAIL;
-    break;
-    case HAL_BUSY :
-      usb_status = USBD_BUSY;
-    break;
-    case HAL_TIMEOUT :
-      usb_status = USBD_FAIL;
-    break;
-    default :
-      usb_status = USBD_FAIL;
-    break;
-  }
-  return usb_status;
-}
-
-/**
-  * @brief  Stops the low level portion of the device driver.
-  * @param  pdev: Device handle
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
-{
-  HAL_StatusTypeDef hal_status = HAL_OK;
-  USBD_StatusTypeDef usb_status = USBD_OK;
-
-  hal_status = HAL_PCD_Stop(pdev->pData);
-
-  switch (hal_status) {
-    case HAL_OK :
-      usb_status = USBD_OK;
-    break;
-    case HAL_ERROR :
-      usb_status = USBD_FAIL;
-    break;
-    case HAL_BUSY :
-      usb_status = USBD_BUSY;
-    break;
-    case HAL_TIMEOUT :
-      usb_status = USBD_FAIL;
-    break;
-    default :
-      usb_status = USBD_FAIL;
-    break;
-  }
-  return usb_status;
-}
-
-/**
-  * @brief  Opens an endpoint of the low level driver.
-  * @param  pdev: Device handle
-  * @param  ep_addr: Endpoint number
-  * @param  ep_type: Endpoint type
-  * @param  ep_mps: Endpoint max packet size
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps)
-{
-  HAL_StatusTypeDef hal_status = HAL_OK;
-  USBD_StatusTypeDef usb_status = USBD_OK;
-
-  hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type);
-
-  switch (hal_status) {
-    case HAL_OK :
-      usb_status = USBD_OK;
-    break;
-    case HAL_ERROR :
-      usb_status = USBD_FAIL;
-    break;
-    case HAL_BUSY :
-      usb_status = USBD_BUSY;
-    break;
-    case HAL_TIMEOUT :
-      usb_status = USBD_FAIL;
-    break;
-    default :
-      usb_status = USBD_FAIL;
-    break;
-  }
-  return usb_status;
-}
-
-/**
-  * @brief  Closes an endpoint of the low level driver.
-  * @param  pdev: Device handle
-  * @param  ep_addr: Endpoint number
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
-  HAL_StatusTypeDef hal_status = HAL_OK;
-  USBD_StatusTypeDef usb_status = USBD_OK;
-
-  hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
-
-  switch (hal_status) {
-    case HAL_OK :
-      usb_status = USBD_OK;
-    break;
-    case HAL_ERROR :
-      usb_status = USBD_FAIL;
-    break;
-    case HAL_BUSY :
-      usb_status = USBD_BUSY;
-    break;
-    case HAL_TIMEOUT :
-      usb_status = USBD_FAIL;
-    break;
-    default :
-      usb_status = USBD_FAIL;
-    break;
-  }
-  return usb_status;
-}
-
-/**
-  * @brief  Flushes an endpoint of the Low Level Driver.
-  * @param  pdev: Device handle
-  * @param  ep_addr: Endpoint number
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
-  HAL_StatusTypeDef hal_status = HAL_OK;
-  USBD_StatusTypeDef usb_status = USBD_OK;
-
-  hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
-
-  switch (hal_status) {
-    case HAL_OK :
-      usb_status = USBD_OK;
-    break;
-    case HAL_ERROR :
-      usb_status = USBD_FAIL;
-    break;
-    case HAL_BUSY :
-      usb_status = USBD_BUSY;
-    break;
-    case HAL_TIMEOUT :
-      usb_status = USBD_FAIL;
-    break;
-    default :
-      usb_status = USBD_FAIL;
-    break;
-  }
-  return usb_status;
-}
-
-/**
-  * @brief  Sets a Stall condition on an endpoint of the Low Level Driver.
-  * @param  pdev: Device handle
-  * @param  ep_addr: Endpoint number
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
-  HAL_StatusTypeDef hal_status = HAL_OK;
-  USBD_StatusTypeDef usb_status = USBD_OK;
-
-  hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
-
-  switch (hal_status) {
-    case HAL_OK :
-      usb_status = USBD_OK;
-    break;
-    case HAL_ERROR :
-      usb_status = USBD_FAIL;
-    break;
-    case HAL_BUSY :
-      usb_status = USBD_BUSY;
-    break;
-    case HAL_TIMEOUT :
-      usb_status = USBD_FAIL;
-    break;
-    default :
-      usb_status = USBD_FAIL;
-    break;
-  }
-  return usb_status;
-}
-
-/**
-  * @brief  Clears a Stall condition on an endpoint of the Low Level Driver.
-  * @param  pdev: Device handle
-  * @param  ep_addr: Endpoint number
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
-  HAL_StatusTypeDef hal_status = HAL_OK;
-  USBD_StatusTypeDef usb_status = USBD_OK;
-
-  hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
-
-  switch (hal_status) {
-    case HAL_OK :
-      usb_status = USBD_OK;
-    break;
-    case HAL_ERROR :
-      usb_status = USBD_FAIL;
-    break;
-    case HAL_BUSY :
-      usb_status = USBD_BUSY;
-    break;
-    case HAL_TIMEOUT :
-      usb_status = USBD_FAIL;
-    break;
-    default :
-      usb_status = USBD_FAIL;
-    break;
-  }
-  return usb_status;
-}
-
-/**
-  * @brief  Returns Stall condition.
-  * @param  pdev: Device handle
-  * @param  ep_addr: Endpoint number
-  * @retval Stall (1: Yes, 0: No)
-  */
-uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
-  PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
-
-  if((ep_addr & 0x80) == 0x80)
-  {
-    return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
-  }
-  else
-  {
-    return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
-  }
-}
-
-/**
-  * @brief  Assigns a USB address to the device.
-  * @param  pdev: Device handle
-  * @param  dev_addr: Device address
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
-{
-  HAL_StatusTypeDef hal_status = HAL_OK;
-  USBD_StatusTypeDef usb_status = USBD_OK;
-
-  hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
-
-  switch (hal_status) {
-    case HAL_OK :
-      usb_status = USBD_OK;
-    break;
-    case HAL_ERROR :
-      usb_status = USBD_FAIL;
-    break;
-    case HAL_BUSY :
-      usb_status = USBD_BUSY;
-    break;
-    case HAL_TIMEOUT :
-      usb_status = USBD_FAIL;
-    break;
-    default :
-      usb_status = USBD_FAIL;
-    break;
-  }
-  return usb_status;
-}
-
-/**
-  * @brief  Transmits data over an endpoint.
-  * @param  pdev: Device handle
-  * @param  ep_addr: Endpoint number
-  * @param  pbuf: Pointer to data to be sent
-  * @param  size: Data size
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size)
-{
-  HAL_StatusTypeDef hal_status = HAL_OK;
-  USBD_StatusTypeDef usb_status = USBD_OK;
-
-  hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
-
-  switch (hal_status) {
-    case HAL_OK :
-      usb_status = USBD_OK;
-    break;
-    case HAL_ERROR :
-      usb_status = USBD_FAIL;
-    break;
-    case HAL_BUSY :
-      usb_status = USBD_BUSY;
-    break;
-    case HAL_TIMEOUT :
-      usb_status = USBD_FAIL;
-    break;
-    default :
-      usb_status = USBD_FAIL;
-    break;
-  }
-  return usb_status;
-}
-
-/**
-  * @brief  Prepares an endpoint for reception.
-  * @param  pdev: Device handle
-  * @param  ep_addr: Endpoint number
-  * @param  pbuf: Pointer to data to be received
-  * @param  size: Data size
-  * @retval USBD status
-  */
-USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size)
-{
-  HAL_StatusTypeDef hal_status = HAL_OK;
-  USBD_StatusTypeDef usb_status = USBD_OK;
-
-  hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
-
-  switch (hal_status) {
-    case HAL_OK :
-      usb_status = USBD_OK;
-    break;
-    case HAL_ERROR :
-      usb_status = USBD_FAIL;
-    break;
-    case HAL_BUSY :
-      usb_status = USBD_BUSY;
-    break;
-    case HAL_TIMEOUT :
-      usb_status = USBD_FAIL;
-    break;
-    default :
-      usb_status = USBD_FAIL;
-    break;
-  }
-  return usb_status;
-}
-
-/**
-  * @brief  Returns the last transfered packet size.
-  * @param  pdev: Device handle
-  * @param  ep_addr: Endpoint number
-  * @retval Recived Data Size
-  */
-uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
-{
-  return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
-}
-
-/**
-  * @brief  Send LPM message to user layer
-  * @param  hpcd: PCD handle
-  * @param  msg: LPM message
-  * @retval None
-  */
-void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
-{
-  switch (msg)
-  {
-  case PCD_LPM_L0_ACTIVE:
-    if (hpcd->Init.low_power_enable)
-    {
-      SystemClockConfig_Resume();
-
-      /* Reset SLEEPDEEP bit of Cortex System Control Register. */
-      SCB->SCR &= (uint32_t)~((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
-    }
-    __HAL_PCD_UNGATE_PHYCLOCK(hpcd);
-    USBD_LL_Resume(hpcd->pData);
-    break;
-
-  case PCD_LPM_L1_ACTIVE:
-    __HAL_PCD_GATE_PHYCLOCK(hpcd);
-    USBD_LL_Suspend(hpcd->pData);
-
-    /* Enter in STOP mode. */
-    if (hpcd->Init.low_power_enable)
-    {
-      /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
-      SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
-    }
-    break;
-  }
-}
-
-/**
-  * @brief  Delays routine for the USB Device Library.
-  * @param  Delay: Delay in ms
-  * @retval None
-  */
-void USBD_LL_Delay(uint32_t Delay)
-{
-  HAL_Delay(Delay);
-}
-
-/**
-  * @brief  Static single allocation.
-  * @param  size: Size of allocated memory
-  * @retval None
-  */
-void *USBD_static_malloc(uint32_t size)
-{
-  static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */
-  return mem;
-}
-
-/**
-  * @brief  Dummy memory free
-  * @param  p: Pointer to allocated  memory address
-  * @retval None
-  */
-void USBD_static_free(void *p)
-{
-
-}
-
-/* USER CODE BEGIN 5 */
-/**
-  * @brief  Configures system clock after wake-up from USB resume callBack:
-  *         enable HSI, PLL and select PLL as system clock source.
-  * @retval None
-  */
-static void SystemClockConfig_Resume(void)
-{
-  SystemClock_Config();
-}
-/* USER CODE END 5 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/Src/usbd_desc.c

@@ -1,445 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usbd_desc.c
-  * @version        : v2.0_Cube
-  * @brief          : This file implements the USB device descriptors.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_core.h"
-#include "usbd_desc.h"
-#include "usbd_conf.h"
-
-/* USER CODE BEGIN INCLUDE */
-
-/* USER CODE END INCLUDE */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-
-/* USER CODE BEGIN PV */
-/* Private variables ---------------------------------------------------------*/
-
-/* USER CODE END PV */
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
-  * @{
-  */
-
-/** @addtogroup USBD_DESC
-  * @{
-  */
-
-/** @defgroup USBD_DESC_Private_TypesDefinitions USBD_DESC_Private_TypesDefinitions
-  * @brief Private types.
-  * @{
-  */
-
-/* USER CODE BEGIN PRIVATE_TYPES */
-
-/* USER CODE END PRIVATE_TYPES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Private_Defines USBD_DESC_Private_Defines
-  * @brief Private defines.
-  * @{
-  */
-
-#define USBD_VID     1155
-#define USBD_LANGID_STRING     1033
-#define USBD_MANUFACTURER_STRING     "STMicroelectronics"
-#define USBD_PID_FS     22336
-#define USBD_PRODUCT_STRING_FS     "STM32 Virtual ComPort"
-#define USBD_CONFIGURATION_STRING_FS     "CDC Config"
-#define USBD_INTERFACE_STRING_FS     "CDC Interface"
-
-#define USB_SIZ_BOS_DESC            0x0C
-
-/* USER CODE BEGIN PRIVATE_DEFINES */
-
-/* USER CODE END PRIVATE_DEFINES */
-
-/**
-  * @}
-  */
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/** @defgroup USBD_DESC_Private_Macros USBD_DESC_Private_Macros
-  * @brief Private macros.
-  * @{
-  */
-
-/* USER CODE BEGIN PRIVATE_MACRO */
-
-/* USER CODE END PRIVATE_MACRO */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
-  * @brief Private functions declaration.
-  * @{
-  */
-
-static void Get_SerialNum(void);
-static void IntToUnicode(uint32_t value, uint8_t * pbuf, uint8_t len);
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
-  * @brief Private functions declaration for FS.
-  * @{
-  */
-
-uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-#if (USBD_LPM_ENABLED == 1)
-uint8_t * USBD_FS_USR_BOSDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
-#endif /* (USBD_LPM_ENABLED == 1) */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
-  * @brief Private variables.
-  * @{
-  */
-
-USBD_DescriptorsTypeDef FS_Desc =
-{
-  USBD_FS_DeviceDescriptor
-, USBD_FS_LangIDStrDescriptor
-, USBD_FS_ManufacturerStrDescriptor
-, USBD_FS_ProductStrDescriptor
-, USBD_FS_SerialStrDescriptor
-, USBD_FS_ConfigStrDescriptor
-, USBD_FS_InterfaceStrDescriptor
-#if (USBD_LPM_ENABLED == 1)
-, USBD_FS_USR_BOSDescriptor
-#endif /* (USBD_LPM_ENABLED == 1) */
-};
-
-#if defined ( __ICCARM__ ) /* IAR Compiler */
-  #pragma data_alignment=4
-#endif /* defined ( __ICCARM__ ) */
-/** USB standard device descriptor. */
-__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
-{
-  0x12,                       /*bLength */
-  USB_DESC_TYPE_DEVICE,       /*bDescriptorType*/
-#if (USBD_LPM_ENABLED == 1)
-  0x01,                       /*bcdUSB */ /* changed to USB version 2.01
-                                             in order to support LPM L1 suspend
-                                             resume test of USBCV3.0*/
-#else
-  0x00,                       /*bcdUSB */
-#endif /* (USBD_LPM_ENABLED == 1) */
-  0x02,
-  0x02,                       /*bDeviceClass*/
-  0x02,                       /*bDeviceSubClass*/
-  0x00,                       /*bDeviceProtocol*/
-  USB_MAX_EP0_SIZE,           /*bMaxPacketSize*/
-  LOBYTE(USBD_VID),           /*idVendor*/
-  HIBYTE(USBD_VID),           /*idVendor*/
-  LOBYTE(USBD_PID_FS),        /*idProduct*/
-  HIBYTE(USBD_PID_FS),        /*idProduct*/
-  0x00,                       /*bcdDevice rel. 2.00*/
-  0x02,
-  USBD_IDX_MFC_STR,           /*Index of manufacturer  string*/
-  USBD_IDX_PRODUCT_STR,       /*Index of product string*/
-  USBD_IDX_SERIAL_STR,        /*Index of serial number string*/
-  USBD_MAX_NUM_CONFIGURATION  /*bNumConfigurations*/
-};
-
-/* USB_DeviceDescriptor */
-/** BOS descriptor. */
-#if (USBD_LPM_ENABLED == 1)
-#if defined ( __ICCARM__ ) /* IAR Compiler */
-  #pragma data_alignment=4
-#endif /* defined ( __ICCARM__ ) */
-__ALIGN_BEGIN uint8_t USBD_FS_BOSDesc[USB_SIZ_BOS_DESC] __ALIGN_END =
-{
-  0x5,
-  USB_DESC_TYPE_BOS,
-  0xC,
-  0x0,
-  0x1,  /* 1 device capability*/
-        /* device capability*/
-  0x7,
-  USB_DEVICE_CAPABITY_TYPE,
-  0x2,
-  0x2,  /* LPM capability bit set*/
-  0x0,
-  0x0,
-  0x0
-};
-#endif /* (USBD_LPM_ENABLED == 1) */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
-  * @brief Private variables.
-  * @{
-  */
-
-#if defined ( __ICCARM__ ) /* IAR Compiler */
-  #pragma data_alignment=4
-#endif /* defined ( __ICCARM__ ) */
-
-/** USB lang indentifier descriptor. */
-__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END =
-{
-     USB_LEN_LANGID_STR_DESC,
-     USB_DESC_TYPE_STRING,
-     LOBYTE(USBD_LANGID_STRING),
-     HIBYTE(USBD_LANGID_STRING)
-};
-
-#if defined ( __ICCARM__ ) /* IAR Compiler */
-  #pragma data_alignment=4
-#endif /* defined ( __ICCARM__ ) */
-/* Internal string descriptor. */
-__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
-
-#if defined ( __ICCARM__ ) /*!< IAR Compiler */
-  #pragma data_alignment=4
-#endif
-__ALIGN_BEGIN uint8_t USBD_StringSerial[USB_SIZ_STRING_SERIAL] __ALIGN_END = {
-  USB_SIZ_STRING_SERIAL,
-  USB_DESC_TYPE_STRING,
-};
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Private_Functions USBD_DESC_Private_Functions
-  * @brief Private functions.
-  * @{
-  */
-
-/**
-  * @brief  Return the device descriptor
-  * @param  speed : Current device speed
-  * @param  length : Pointer to data length variable
-  * @retval Pointer to descriptor buffer
-  */
-uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
-  UNUSED(speed);
-  *length = sizeof(USBD_FS_DeviceDesc);
-  return USBD_FS_DeviceDesc;
-}
-
-/**
-  * @brief  Return the LangID string descriptor
-  * @param  speed : Current device speed
-  * @param  length : Pointer to data length variable
-  * @retval Pointer to descriptor buffer
-  */
-uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
-  UNUSED(speed);
-  *length = sizeof(USBD_LangIDDesc);
-  return USBD_LangIDDesc;
-}
-
-/**
-  * @brief  Return the product string descriptor
-  * @param  speed : Current device speed
-  * @param  length : Pointer to data length variable
-  * @retval Pointer to descriptor buffer
-  */
-uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
-  if(speed == 0)
-  {
-    USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
-  }
-  else
-  {
-    USBD_GetString((uint8_t *)USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
-  }
-  return USBD_StrDesc;
-}
-
-/**
-  * @brief  Return the manufacturer string descriptor
-  * @param  speed : Current device speed
-  * @param  length : Pointer to data length variable
-  * @retval Pointer to descriptor buffer
-  */
-uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
-  UNUSED(speed);
-  USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
-  return USBD_StrDesc;
-}
-
-/**
-  * @brief  Return the serial number string descriptor
-  * @param  speed : Current device speed
-  * @param  length : Pointer to data length variable
-  * @retval Pointer to descriptor buffer
-  */
-uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
-  UNUSED(speed);
-  *length = USB_SIZ_STRING_SERIAL;
-
-  /* Update the serial number string descriptor with the data from the unique
-   * ID */
-  Get_SerialNum();
-  /* USER CODE BEGIN USBD_FS_SerialStrDescriptor */
-
-  /* USER CODE END USBD_FS_SerialStrDescriptor */
-  return (uint8_t *) USBD_StringSerial;
-}
-
-/**
-  * @brief  Return the configuration string descriptor
-  * @param  speed : Current device speed
-  * @param  length : Pointer to data length variable
-  * @retval Pointer to descriptor buffer
-  */
-uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
-  if(speed == USBD_SPEED_HIGH)
-  {
-    USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
-  }
-  else
-  {
-    USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
-  }
-  return USBD_StrDesc;
-}
-
-/**
-  * @brief  Return the interface string descriptor
-  * @param  speed : Current device speed
-  * @param  length : Pointer to data length variable
-  * @retval Pointer to descriptor buffer
-  */
-uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
-  if(speed == 0)
-  {
-    USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
-  }
-  else
-  {
-    USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
-  }
-  return USBD_StrDesc;
-}
-
-#if (USBD_LPM_ENABLED == 1)
-/**
-  * @brief  Return the BOS descriptor
-  * @param  speed : Current device speed
-  * @param  length : Pointer to data length variable
-  * @retval Pointer to descriptor buffer
-  */
-uint8_t * USBD_FS_USR_BOSDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
-{
-  UNUSED(speed);
-  *length = sizeof(USBD_FS_BOSDesc);
-  return (uint8_t*)USBD_FS_BOSDesc;
-}
-#endif /* (USBD_LPM_ENABLED == 1) */
-
-/**
-  * @brief  Create the serial number string descriptor
-  * @param  None
-  * @retval None
-  */
-static void Get_SerialNum(void)
-{
-  uint32_t deviceserial0, deviceserial1, deviceserial2;
-
-  deviceserial0 = *(uint32_t *) DEVICE_ID1;
-  deviceserial1 = *(uint32_t *) DEVICE_ID2;
-  deviceserial2 = *(uint32_t *) DEVICE_ID3;
-
-  deviceserial0 += deviceserial2;
-
-  if (deviceserial0 != 0)
-  {
-    IntToUnicode(deviceserial0, &USBD_StringSerial[2], 8);
-    IntToUnicode(deviceserial1, &USBD_StringSerial[18], 4);
-  }
-}
-
-/**
-  * @brief  Convert Hex 32Bits value into char
-  * @param  value: value to convert
-  * @param  pbuf: pointer to the buffer
-  * @param  len: buffer length
-  * @retval None
-  */
-static void IntToUnicode(uint32_t value, uint8_t * pbuf, uint8_t len)
-{
-  uint8_t idx = 0;
-
-  for (idx = 0; idx < len; idx++)
-  {
-    if (((value >> 28)) < 0xA)
-    {
-      pbuf[2 * idx] = (value >> 28) + '0';
-    }
-    else
-    {
-      pbuf[2 * idx] = (value >> 28) + 'A' - 10;
-    }
-
-    value = value << 4;
-
-    pbuf[2 * idx + 1] = 0;
-  }
-}
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/api-hal/api-hal-boot.c

@@ -1,13 +0,0 @@
-#include <api-hal-boot.h>
-#include <stm32l4xx_ll_rtc.h>
-
-#define BOOT_REQUEST_NONE 0x00000000
-#define BOOT_REQUEST_DFU 0xDF00B000
-
-void api_hal_boot_set_mode(ApiHalBootMode mode) {
-    if (mode == ApiHalBootModeNormal) {
-        LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR0, BOOT_REQUEST_NONE);
-    } else if (mode == ApiHalBootModeDFU) {
-        LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR0, BOOT_REQUEST_DFU);
-    }
-}

firmware/targets/f2/api-hal/api-hal-bt.c

@@ -1,12 +0,0 @@
-#include <api-hal-bt.h>
-
-void api_hal_bt_init() {
-}
-
-void api_hal_bt_dump_state(string_t buffer) {
-    string_cat_printf(buffer, "BLE unsupported");
-}
-
-bool api_hal_bt_is_alive() {
-    return false;
-}

firmware/targets/f2/api-hal/api-hal-delay.c

@@ -1,24 +0,0 @@
-#include "api-hal-delay.h"
-#include "assert.h"
-#include "cmsis_os2.h"
-
-void delay_us_init_DWT(void) {
-    CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;
-    DWT->CTRL |= DWT_CTRL_CYCCNTENA_Msk;
-    DWT->CYCCNT = 0U;
-}
-
-void delay_us(float microseconds) {
-    uint32_t start = DWT->CYCCNT;
-    uint32_t time_ticks = microseconds * (SystemCoreClock / 1000000.0f);
-    while((DWT->CYCCNT - start) < time_ticks) {
-    };
-}
-
-// cannot be used in ISR
-// TODO add delay_ISR variant
-void delay(float milliseconds) {
-    uint32_t ticks = milliseconds / (1000.0f / osKernelGetTickFreq());
-    osStatus_t result = osDelay(ticks);
-    assert(result == osOK);
-}

firmware/targets/f2/api-hal/api-hal-gpio.c

@@ -1,26 +0,0 @@
-#include "api-hal-gpio.h"
-
-// init GPIO
-void hal_gpio_init(
-    const GpioPin* gpio,
-    const GpioMode mode,
-    const GpioPull pull,
-    const GpioSpeed speed) {
-    // TODO: Alternate Functions
-    GPIO_InitTypeDef GPIO_InitStruct = {0};
-
-    GPIO_InitStruct.Pin = gpio->pin;
-    GPIO_InitStruct.Mode = mode;
-    GPIO_InitStruct.Pull = pull;
-    GPIO_InitStruct.Speed = speed;
-
-    HAL_GPIO_Init(gpio->port, &GPIO_InitStruct);
-}
-
-bool hal_gpio_read_sd_detect(void) {
-    return true;
-}
-
-void enable_cc1101_irq() {
-    
-}

firmware/targets/f2/api-hal/api-hal-power.c

@@ -1,64 +0,0 @@
-#include <api-hal-power.h>
-#include <adc.h>
-#include <math.h>
-
-#define BATTERY_MIN_VOLTAGE 3.4f
-#define BATTERY_MAX_VOLTAGE 4.1f
-
-void api_hal_power_init() {}
-
-uint8_t api_hal_power_get_pct() {
-    float value = api_hal_power_get_battery_voltage();
-
-    if (value == NAN || value < BATTERY_MIN_VOLTAGE) {
-        return 0;
-    }
-
-    value = (value - BATTERY_MIN_VOLTAGE) / (BATTERY_MAX_VOLTAGE - BATTERY_MIN_VOLTAGE) * 100;
-
-    if(value > 100) {
-        value = 100;
-    }
-
-    return value;
-}
-
-bool api_hal_power_is_charging() {
-    return false;
-}
-
-void api_hal_power_off() {}
-
-void api_hal_power_enable_otg() {}
-
-void api_hal_power_disable_otg() {}
-
-float api_hal_power_get_battery_voltage() {
-    ADC_ChannelConfTypeDef sConfig = {0};
-    sConfig.Channel = ADC_CHANNEL_4;
-    sConfig.Rank = ADC_REGULAR_RANK_1;
-    sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
-    sConfig.SingleDiff = ADC_SINGLE_ENDED;
-    sConfig.OffsetNumber = ADC_OFFSET_NONE;
-    sConfig.Offset = 0;
-    if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK) {
-        Error_Handler();
-    }
-
-    float value = NAN;
-    HAL_ADC_Start(&hadc1);
-    if(HAL_ADC_PollForConversion(&hadc1, 1000) != HAL_TIMEOUT) {
-        // adc range / 12 bits * adc_value * divider ratio * sampling drag correction
-        value = 3.3f / 4096.0f * HAL_ADC_GetValue(&hadc1) * 2 * 1.3;
-    }
-
-    return value;
-}
-
-float api_hal_power_get_battery_current() {
-    return NAN;
-}
-
-void api_hal_power_dump_state(string_t buffer) {
-    string_cat_printf(buffer, "Not supported");
-}

firmware/targets/f2/api-hal/api-hal-pwm.c

@@ -1,51 +0,0 @@
-#include "api-hal-pwm.h"
-
-void hal_pwm_set(float value, float freq, TIM_HandleTypeDef* tim, uint32_t channel) {
-    tim->Init.CounterMode = TIM_COUNTERMODE_UP;
-    tim->Init.Period = (uint32_t)((SystemCoreClock / (tim->Init.Prescaler + 1)) / freq);
-    tim->Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-    tim->Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-    HAL_TIM_PWM_Init(tim);
-
-    TIM_OC_InitTypeDef sConfigOC;
-
-    sConfigOC.OCMode = TIM_OCMODE_PWM1;
-    sConfigOC.Pulse = (uint16_t)(tim->Init.Period * value);
-    sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
-    sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
-    HAL_TIM_PWM_ConfigChannel(tim, &sConfigOC, channel);
-    HAL_TIM_PWM_Start(tim, channel);
-}
-
-void hal_pwmn_set(float value, float freq, TIM_HandleTypeDef* tim, uint32_t channel) {
-    tim->Init.CounterMode = TIM_COUNTERMODE_UP;
-    tim->Init.Period = (uint32_t)((SystemCoreClock / (tim->Init.Prescaler + 1)) / freq - 1);
-    tim->Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-    tim->Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-    HAL_TIM_PWM_Init(tim);
-
-    TIM_OC_InitTypeDef sConfigOC;
-
-    sConfigOC.OCMode = TIM_OCMODE_PWM1;
-    sConfigOC.Pulse = (uint16_t)(tim->Init.Period * value);
-    sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
-    sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
-    HAL_TIM_PWM_ConfigChannel(tim, &sConfigOC, channel);
-    HAL_TIMEx_PWMN_Start(tim, channel);
-}
-
-void hal_pwm_stop(TIM_HandleTypeDef* tim, uint32_t channel) {
-    HAL_TIM_PWM_Stop(tim, channel);
-}
-
-void hal_pwmn_stop(TIM_HandleTypeDef* tim, uint32_t channel) {
-    HAL_TIMEx_PWMN_Stop(tim, channel);
-}
-
-void irda_pwm_set(float value, float freq){
-    hal_pwm_set(value, freq, &IRDA_TX_TIM, IRDA_TX_CH);
-}
-
-void irda_pwm_stop(){
-    hal_pwm_stop(&IRDA_TX_TIM, IRDA_TX_CH);
-}

firmware/targets/f2/api-hal/api-hal-resources.c

@@ -1,33 +0,0 @@
-#include "main.h"
-#include "flipper_v2.h"
-
-#define DEBOUNCE_TICKS 10
-
-const GpioPin input_gpio[GPIO_INPUT_PINS_COUNT] = {
-    {BUTTON_UP_GPIO_Port, BUTTON_UP_Pin},
-    {BUTTON_DOWN_GPIO_Port, BUTTON_DOWN_Pin},
-    {BUTTON_RIGHT_GPIO_Port, BUTTON_RIGHT_Pin},
-    {BUTTON_LEFT_GPIO_Port, BUTTON_LEFT_Pin},
-    {BUTTON_OK_GPIO_Port, BUTTON_OK_Pin},
-    {BUTTON_BACK_GPIO_Port, BUTTON_BACK_Pin},
-    {CHRG_GPIO_Port, CHRG_Pin}};
-
-const bool input_invert[GPIO_INPUT_PINS_COUNT] = {
-    false, // {BUTTON_UP_GPIO_Port, BUTTON_UP_Pin},
-    false, // {BUTTON_DOWN_GPIO_Port, BUTTON_DOWN_Pin},
-    false, // {BUTTON_RIGHT_GPIO_Port, BUTTON_RIGHT_Pin},
-    false, // {BUTTON_LEFT_GPIO_Port, BUTTON_LEFT_Pin},
-    false, // {BUTTON_OK_GPIO_Port, BUTTON_OK_Pin},
-    false, // {BUTTON_BACK_GPIO_Port, BUTTON_BACK_Pin},
-    true, // {CHRG_GPIO_Port, CHRG_Pin}
-};
-
-const GpioPin led_gpio[3] = {
-    {LED_RED_GPIO_Port, LED_RED_Pin},
-    {LED_GREEN_GPIO_Port, LED_GREEN_Pin},
-    {LED_BLUE_GPIO_Port, LED_BLUE_Pin}};
-
-const GpioPin backlight_gpio = {DISPLAY_BACKLIGHT_GPIO_Port, DISPLAY_BACKLIGHT_Pin};
-const GpioPin vibro_gpio = {VIBRO_GPIO_Port, VIBRO_Pin};
-const GpioPin ibutton_gpio = {iButton_GPIO_Port, iButton_Pin};
-const GpioPin cc1101_g0_gpio = {NULL, 0};

firmware/targets/f2/api-hal/api-hal-resources.h

@@ -1,15 +0,0 @@
-#pragma once
-#include "main.h"
-#include "flipper_v2.h"
-
-#define DEBOUNCE_TICKS 10
-#define GPIO_INPUT_PINS_COUNT 7
-
-extern const GpioPin input_gpio[GPIO_INPUT_PINS_COUNT];
-extern const bool input_invert[GPIO_INPUT_PINS_COUNT];
-
-extern const GpioPin led_gpio[3];
-extern const GpioPin backlight_gpio;
-extern const GpioPin vibro_gpio;
-extern const GpioPin ibutton_gpio;
-extern const GpioPin cc1101_g0_gpio;

firmware/targets/f2/api-hal/api-hal-task.h

@@ -1,13 +0,0 @@
-#pragma once
-#include "main.h"
-#include <cmsis_os.h>
-#include <stdbool.h>
-
-// Task stack size in bytes
-#define DEFAULT_STACK_SIZE 2048
-
-// Max system tasks count
-#define MAX_TASK_COUNT 10
-
-bool task_equal(TaskHandle_t a, TaskHandle_t b);
-bool task_is_isr_context(void);

firmware/targets/f2/api-hal/api-hal-tim.c

@@ -1,5 +0,0 @@
-#include "cmsis_os.h"
-#include "api-hal-tim.h"
-
-void tim_irda_rx_init(void) {
-}

firmware/targets/f2/api-hal/api-hal-uid.c

@@ -1,10 +0,0 @@
-#include <api-hal-uid.h>
-#include <stm32l4xx.h>
-
-size_t api_hal_uid_size() {
-    return 96/8;
-}
-
-const uint8_t* api_hal_uid() {
-    return (const uint8_t *)UID_BASE;
-}

firmware/targets/f2/cube.ioc

@@ -1,521 +0,0 @@
-#MicroXplorer Configuration settings - do not modify
-PB13.GPIOParameters=GPIO_Label
-PC7.GPIOParameters=GPIO_ModeDefaultPP,GPIO_Speed,GPIO_PuPd,GPIO_Label
-PA15\ (JTDI).GPIOParameters=PinState,GPIO_Label
-RCC.USART1Freq_Value=64000000
-TIM8.ICPolarity_CH2=TIM_INPUTCHANNELPOLARITY_BOTHEDGE
-SPI3.Direction=SPI_DIRECTION_2LINES
-PC10.GPIO_PuPd=GPIO_PULLDOWN
-SPI3.VirtualType=VM_MASTER
-SPI1.VirtualType=VM_MASTER
-VP_ADC1_TempSens_Input.Mode=IN-TempSens
-PC12.Locked=true
-SH.GPXTI9.0=GPIO_EXTI9
-PC12.Signal=SPI3_MOSI
-PB14.GPIO_Label=LED_GREEN
-PC7.Locked=true
-PA13\ (JTMS-SWDIO).Locked=true
-PC6.GPIO_Label=VIBRO
-VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
-PC3.Locked=true
-RCC.RTCFreq_Value=32768
-PA3.GPIOParameters=GPIO_Label
-PB6.GPIO_Label=DISPLAY_BACKLIGHT
-PA15\ (JTDI).Signal=GPIO_Output
-PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
-PC5.Mode=INP
-USART1.IPParameters=VirtualMode-Asynchronous
-PB13.Signal=TIM15_CH1N
-VP_TIM8_VS_ClockSourceINT.Signal=TIM8_VS_ClockSourceINT
-PA2.GPIOParameters=GPIO_Label
-PinOutPanel.RotationAngle=0
-RCC.MCO1PinFreq_Value=64000000
-RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
-TIM15.Channel-Output\ Compare1\ CH1N=TIM_CHANNEL_1
-PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
-SH.GPXTI13.0=GPIO_EXTI13
-PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
-RCC.LPTIM1Freq_Value=64000000
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false
-NVIC.EXTI1_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-PB4\ (NJTRST).GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-RCC.ADCCLockSelection=RCC_ADCCLKSOURCE_SYSCLK
-SPI1.Direction=SPI_DIRECTION_2LINES
-RCC.APB2TimFreq_Value=64000000
-PB6.Signal=GPIO_Output
-PC7.Signal=S_TIM8_CH2
-RTC.IPParameters=Year,Month,Date
-SPI1.CalculateBaudRate=4.0 MBits/s
-PC3.Signal=ADCx_IN4
-RCC.SAI2Freq_Value=13714285.714285715
-FREERTOS.configMINIMAL_STACK_SIZE=128
-PA1.GPIO_PuPd=GPIO_PULLDOWN
-RCC.PREFETCH_ENABLE=1
-PB13.Locked=true
-RCC.USART3Freq_Value=64000000
-NVIC.EXTI15_10_IRQn=true\:5\:0\:true\:false\:true\:false\:true\:true
-ProjectManager.ProjectBuild=false
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-PA0.Locked=true
-PB2.Signal=GPIO_Analog
-PA8.Locked=true
-PA4.Locked=true
-RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
-ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.16.0
-VP_ADC1_Vref_Input.Mode=IN-Vrefint
-MxDb.Version=DB.6.0.0
-PB0.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-PA1.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-ProjectManager.BackupPrevious=false
-VP_SYS_VS_tim17.Signal=SYS_VS_tim17
-PC4.GPIO_Label=NFC_CS
-PB1.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
-FREERTOS.HEAP_NUMBER=4
-PB1.GPIO_Label=LED_BLUE
-SPI1.DataSize=SPI_DATASIZE_8BIT
-PC7.GPIO_ModeDefaultPP=GPIO_MODE_AF_OD
-PA8.Signal=GPIO_Output
-PA8.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
-RCC.PLLRCLKFreq_Value=64000000
-SH.ADCx_IN4.ConfNb=1
-PB6.Locked=true
-NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:false\:false
-ProjectManager.HalAssertFull=false
-ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
-PA0.Signal=ADCx_IN5
-PC8.GPIOParameters=GPIO_Label
-Mcu.Package=LQFP64
-PB9.Signal=GPXTI9
-PB1.Signal=GPIO_Output
-PA5.Locked=true
-NVIC.TimeBase=TIM1_TRG_COM_TIM17_IRQn
-SPI3.Mode=SPI_MODE_MASTER
-SH.GPXTI8.0=GPIO_EXTI8
-SH.GPXTI8.ConfNb=1
-NVIC.TimeBaseIP=TIM17
-RCC.LSCOPinFreq_Value=32000
-PA10.Signal=USART1_RX
-PB9.GPIO_PuPd=GPIO_PULLDOWN
-VP_RTC_VS_RTC_Calendar.Mode=RTC_Calendar
-FREERTOS.FootprintOK=true
-RCC.DFSDMFreq_Value=64000000
-PC11.Mode=Full_Duplex_Master
-PB14.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
-NVIC.EXTI2_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-RCC.PLLPoutputFreq_Value=18285714.285714287
-RCC.APB1TimFreq_Value=64000000
-FREERTOS.configGENERATE_RUN_TIME_STATS=1
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-RCC.LPUART1Freq_Value=64000000
-USB_OTG_FS.IPParameters=VirtualMode
-PB13.Mode=Output Compare1 CH1N
-PB10.GPIOParameters=GPIO_Label
-PC12.GPIO_PuPd=GPIO_PULLDOWN
-PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
-PA13\ (JTMS-SWDIO).GPIOParameters=GPIO_Label
-PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
-PA8.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
-ProjectManager.CustomerFirmwarePackage=../../../lib/STM32CubeL4
-PC4.GPIOParameters=PinState,GPIO_Label
-PC2.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-NVIC.EXTI4_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-RCC.PLLQoutputFreq_Value=64000000
-ProjectManager.ProjectFileName=cube.ioc
-FREERTOS.Tasks01=defaultTask,24,1024,StartDefaultTask,Default,NULL,Dynamic,NULL,NULL;app_main,8,1024,app,As external,NULL,Dynamic,NULL,NULL
-ADC1.Rank-0\#ChannelRegularConversion=1
-TIM5.IPParameters=Prescaler,Period,Channel-PWM Generation4 CH4,Pulse-PWM Generation4 CH4
-Mcu.PinsNb=60
-PC4.PinState=GPIO_PIN_SET
-PC11.Locked=true
-VP_SYS_VS_tim17.Mode=TIM17
-ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag,master,NbrOfConversion
-PC13.Locked=true
-ADC1.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
-PC13.Signal=GPXTI13
-RCC.SWPMI1Freq_Value=64000000
-FREERTOS.configCHECK_FOR_STACK_OVERFLOW=1
-PB8.GPIO_PuPd=GPIO_PULLDOWN
-PC6.Signal=GPIO_Output
-PC2.Signal=GPXTI2
-PB11.GPIO_Label=IR_TX
-PC9.PinState=GPIO_PIN_SET
-SH.GPXTI0.ConfNb=1
-SPI1.CLKPhase=SPI_PHASE_1EDGE
-PC0.Signal=GPIO_Analog
-PB14.Locked=true
-PC11.GPIOParameters=GPIO_PuPd
-SH.S_TIM8_CH2.0=TIM8_CH2,Input_Capture2_from_TI2
-PC3.GPIOParameters=GPIO_Label
-PB8.GPIO_Label=BUTTON_RIGHT
-PA11.Locked=true
-PA8.GPIO_Label=LED_RED
-Mcu.Pin59=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS
-SH.GPXTI2.ConfNb=1
-Mcu.Pin57=VP_SYS_VS_tim17
-Mcu.Pin58=VP_TIM8_VS_ClockSourceINT
-PB14.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
-Mcu.Pin51=VP_ADC1_TempSens_Input
-RTC.Year=20
-Mcu.Pin52=VP_ADC1_Vref_Input
-Mcu.Pin50=PB9
-Mcu.Pin55=VP_RTC_VS_RTC_Activate
-Mcu.Pin56=VP_RTC_VS_RTC_Calendar
-Mcu.Pin53=VP_COMP1_VS_VREFINT12
-Mcu.Pin54=VP_FREERTOS_VS_CMSIS_V2
-PC6.Locked=true
-PA9.Signal=USART1_TX
-PB11.GPIOParameters=GPIO_Label
-PB5.Locked=true
-PB9.Locked=true
-VP_TIM8_VS_ClockSourceINT.Mode=Internal
-PC7.GPIO_PuPd=GPIO_NOPULL
-Mcu.Pin48=PB7
-Mcu.Pin49=PB8
-RCC.PLLSAI1PoutputFreq_Value=13714285.714285715
-Mcu.Pin46=PB5
-Mcu.Pin47=PB6
-PB10.Signal=GPIO_Output
-PB14.Signal=GPIO_Output
-RCC.PLLSAI2RoutputFreq_Value=32000000
-PA5.Signal=GPIO_Analog
-Mcu.Pin40=PC10
-Mcu.Pin41=PC11
-PC12.Mode=Full_Duplex_Master
-Mcu.Pin44=PB3 (JTDO-TRACESWO)
-Mcu.Pin45=PB4 (NJTRST)
-Mcu.Pin42=PC12
-Mcu.Pin43=PD2
-ProjectManager.LastFirmware=true
-Mcu.Pin37=PA13 (JTMS-SWDIO)
-Mcu.Pin38=PA14 (JTCK-SWCLK)
-PB15.GPIO_Label=RFID_PULL
-Mcu.Pin35=PA11
-RCC.I2C1Freq_Value=64000000
-Mcu.Pin36=PA12
-SPI1.Mode=SPI_MODE_MASTER
-Mcu.Pin39=PA15 (JTDI)
-PB3\ (JTDO-TRACESWO).Mode=TX_Only_Simplex_Unidirect_Master
-RCC.RNGFreq_Value=48000000
-RCC.LCDFreq_Value=32768
-PC2.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-VP_ADC1_TempSens_Input.Signal=ADC1_TempSens_Input
-Mcu.Pin30=PC8
-PA1.GPIO_Label=BUTTON_DOWN
-Mcu.Pin33=PA9
-Mcu.Pin34=PA10
-Mcu.Pin31=PC9
-SH.ADCx_IN4.0=ADC1_IN4,IN4-Single-Ended
-Mcu.Pin32=PA8
-PA9.Locked=true
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-PC10.GPIOParameters=GPIO_PuPd
-SH.S_TIM5_CH4.ConfNb=1
-ProjectManager.FreePins=false
-PC9.GPIOParameters=PinState,GPIO_Label
-RCC.LPTIM2Freq_Value=64000000
-Mcu.Pin26=PB14
-Mcu.Pin27=PB15
-Mcu.Pin24=PB12
-ProjectManager.UnderRoot=false
-Mcu.Pin25=PB13
-TIM8.Period=32768-1
-Mcu.Pin28=PC6
-PC7.GPIO_Label=iButton
-Mcu.Pin29=PC7
-PA13\ (JTMS-SWDIO).Mode=Serial_Wire
-PA4.Signal=GPIO_Analog
-Mcu.Pin22=PB10
-PB5.Signal=SPI1_MOSI
-Mcu.Pin23=PB11
-Mcu.Pin20=PB1
-ADC1.master=1
-PA3.Locked=true
-Mcu.Pin21=PB2
-PA10.Locked=true
-PA14\ (JTCK-SWCLK).Locked=true
-NVIC.ForceEnableDMAVector=true
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-ProjectManager.CompilerOptimize=6
-PA11.Signal=USB_OTG_FS_DM
-ProjectManager.HeapSize=0x200
-PA0.GPIOParameters=GPIO_Label
-Mcu.Pin15=PA6
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-Mcu.Pin16=PA7
-Mcu.Pin13=PA4
-Mcu.Pin14=PA5
-Mcu.Pin19=PB0
-SH.GPXTI15.ConfNb=1
-ProjectManager.ComputerToolchain=false
-Mcu.Pin17=PC4
-Mcu.Pin18=PC5
-SH.ADCx_IN5.0=ADC1_IN5,IN5-Single-Ended
-NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-Mcu.Pin11=PA2
-Mcu.Pin12=PA3
-Mcu.Pin10=PA1
-PC3.GPIO_Label=BATT_V
-RCC.PWRFreq_Value=64000000
-PA15\ (JTDI).PinState=GPIO_PIN_SET
-SH.ADCx_IN5.ConfNb=1
-PB4\ (NJTRST).GPIO_Label=BUTTON_LEFT
-PB1.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
-SH.GPXTI1.ConfNb=1
-PD2.Signal=GPIO_Analog
-PB6.GPIO_Speed=GPIO_SPEED_FREQ_LOW
-RCC.I2C2Freq_Value=64000000
-PB0.Signal=GPXTI0
-PB4\ (NJTRST).GPIO_PuPd=GPIO_PULLDOWN
-RTC.Date=20
-PC0.Locked=true
-PC1.Signal=GPIO_Analog
-Mcu.Family=STM32L4
-SH.GPXTI1.0=GPIO_EXTI1
-ProjectManager.MainLocation=Src
-USB_DEVICE.CLASS_NAME_FS=CDC
-RCC.SAI1Freq_Value=13714285.714285715
-RCC.CortexFreq_Value=64000000
-ProjectManager.KeepUserCode=true
-Mcu.UserName=STM32L476RGTx
-PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
-PH0-OSC_IN\ (PH0).Locked=true
-PC10.Locked=true
-PC10.Signal=SPI3_SCK
-RCC.PLLSAI1RoutputFreq_Value=48000000
-PA0.GPIO_Label=IR_RX
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_SPI1_Init-SPI1-false-HAL-true,4-MX_SPI3_Init-SPI3-false-HAL-true,5-MX_ADC1_Init-ADC1-false-HAL-true,6-MX_COMP1_Init-COMP1-false-HAL-true,7-MX_TIM5_Init-TIM5-false-HAL-true,8-MX_TIM15_Init-TIM15-false-HAL-true,9-MX_USART1_UART_Init-USART1-false-HAL-true,10-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-false,11-MX_TIM8_Init-TIM8-false-HAL-true,12-MX_RTC_Init-RTC-false-HAL-true
-PA11.Mode=Device_Only
-PC9.Locked=true
-TIM5.Pulse-PWM\ Generation4\ CH4=145
-PB0.GPIO_Label=BUTTON_UP
-RCC.USART2Freq_Value=64000000
-PD2.Locked=true
-VP_RTC_VS_RTC_Calendar.Signal=RTC_VS_RTC_Calendar
-VP_COMP1_VS_VREFINT12.Signal=COMP1_VS_VREFINT12
-PC13.GPIO_Label=BUTTON_BACK
-PC1.Locked=true
-PB13.GPIO_Label=RFID_OUT
-PB11.Signal=GPIO_Output
-PB15.Signal=GPXTI15
-ProjectManager.StackSize=0x400
-PB3\ (JTDO-TRACESWO).Signal=SPI1_SCK
-VP_FREERTOS_VS_CMSIS_V2.Mode=CMSIS_V2
-SH.GPXTI2.0=GPIO_EXTI2
-RCC.I2C3Freq_Value=64000000
-Mcu.IP4=RCC
-RCC.FCLKCortexFreq_Value=64000000
-Mcu.IP5=RTC
-Mcu.IP2=FREERTOS
-Mcu.IP3=NVIC
-PC11.GPIO_PuPd=GPIO_PULLDOWN
-Mcu.IP0=ADC1
-Mcu.IP1=COMP1
-PA12.Locked=true
-PA12.Signal=USB_OTG_FS_DP
-PB8.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-SPI1.CLKPolarity=SPI_POLARITY_LOW
-Mcu.UserConstants=
-RCC.VCOSAI1OutputFreq_Value=96000000
-SPI3.CLKPolarity=SPI_POLARITY_LOW
-RCC.SDMMCFreq_Value=48000000
-PA14\ (JTCK-SWCLK).GPIOParameters=GPIO_Label
-SH.GPXTI13.ConfNb=1
-Mcu.ThirdPartyNb=0
-RCC.HCLKFreq_Value=64000000
-Mcu.IPNb=15
-ProjectManager.PreviousToolchain=
-PA8.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
-Mcu.Pin6=PC1
-PB9.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-Mcu.Pin7=PC2
-Mcu.Pin8=PC3
-Mcu.Pin9=PA0
-FREERTOS.IPParameters=Tasks01,configTOTAL_HEAP_SIZE,HEAP_NUMBER,configUSE_TIMERS,configUSE_IDLE_HOOK,FootprintOK,configCHECK_FOR_STACK_OVERFLOW,configRECORD_STACK_HIGH_ADDRESS,configGENERATE_RUN_TIME_STATS,configMINIMAL_STACK_SIZE
-RCC.AHBFreq_Value=64000000
-Mcu.Pin0=PC13
-SPI3.DataSize=SPI_DATASIZE_8BIT
-Mcu.Pin1=PC14-OSC32_IN (PC14)
-TIM8.IPParameters=Channel-Input_Capture2_from_TI2,ICPolarity_CH2,Prescaler,Period
-GPIO.groupedBy=Group By Peripherals
-Mcu.Pin2=PC15-OSC32_OUT (PC15)
-Mcu.Pin3=PH0-OSC_IN (PH0)
-Mcu.Pin4=PH1-OSC_OUT (PH1)
-Mcu.Pin5=PC0
-ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_4
-PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
-RCC.HSE_VALUE=16000000
-FREERTOS.configUSE_TIMERS=1
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-Mcu.IP10=TIM8
-NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:false\:true\:true\:false
-Mcu.IP12=USART1
-Mcu.IP11=TIM15
-PB0.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-NVIC.TIM1_TRG_COM_TIM17_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
-RTC.Month=RTC_MONTH_NOVEMBER
-Mcu.IP14=USB_OTG_FS
-Mcu.IP13=USB_DEVICE
-RCC.VCOInputFreq_Value=8000000
-TIM5.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
-PB5.Mode=TX_Only_Simplex_Unidirect_Master
-File.Version=6
-PC13.GPIO_PuPd=GPIO_PULLDOWN
-PB7.Signal=GPIO_Input
-PB8.Locked=true
-PB6.GPIOParameters=GPIO_Speed,GPIO_Label
-PB0.Locked=true
-FREERTOS.configTOTAL_HEAP_SIZE=40960
-VP_COMP1_VS_VREFINT12.Mode=VREFINT_12
-ProjectManager.ProjectName=cube
-PB1.PinState=GPIO_PIN_SET
-PB7.GPIO_Label=CC1101_G0
-PB4\ (NJTRST).Locked=true
-PA6.Signal=GPIO_Analog
-PA7.Locked=true
-PB15.GPIO_PuPd=GPIO_PULLDOWN
-NVIC.OTG_FS_IRQn=true\:5\:0\:false\:false\:true\:true\:false\:true
-ProjectManager.ToolChainLocation=
-PA2.GPIO_Label=DISPLAY_DI
-RCC.LSI_VALUE=32000
-SH.GPXTI0.0=GPIO_EXTI0
-USB_OTG_FS.VirtualMode=Device_Only
-VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Signal=USB_DEVICE_VS_USB_DEVICE_CDC_FS
-PC14-OSC32_IN\ (PC14).Locked=true
-TIM8.Prescaler=64-1
-PC4.Locked=true
-SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,BaudRatePrescaler,CLKPolarity,CLKPhase
-PC5.Signal=COMP1_INP
-SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_16
-PA1.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-PC2.GPIO_Label=CHRG
-PA8.PinState=GPIO_PIN_SET
-PB15.Locked=true
-PB3\ (JTDO-TRACESWO).Locked=true
-RCC.PLLSAI1N=12
-PA3.Signal=S_TIM5_CH4
-PA2.Locked=true
-VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
-RCC.MSI_VALUE=4000000
-RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
-PA14\ (JTCK-SWCLK).Mode=Serial_Wire
-PB8.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-PB9.GPIO_Label=BUTTON_OK
-PA10.Mode=Asynchronous
-PC9.GPIO_Label=SD_CS
-ProjectManager.NoMain=false
-SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,BaudRatePrescaler,CLKPolarity,CLKPhase
-USB_DEVICE.VirtualModeFS=Cdc_FS
-NVIC.SavedSvcallIrqHandlerGenerated=true
-PC11.Signal=SPI3_MISO
-PC8.Signal=GPIO_Output
-PC4.Signal=GPIO_Output
-PC10.Mode=Full_Duplex_Master
-ProjectManager.DefaultFWLocation=false
-PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
-PB12.Locked=true
-PA14\ (JTCK-SWCLK).GPIO_Label=TCK
-ProjectManager.DeletePrevious=true
-PB10.Locked=true
-RCC.VCOSAI2OutputFreq_Value=64000000
-boardIOC=true
-USB_DEVICE.IPParameters=VirtualMode,VirtualModeFS,CLASS_NAME_FS
-RCC.FamilyName=M
-PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
-PB9.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-PC8.GPIO_Label=DISPLAY_CS
-PC12.GPIOParameters=GPIO_PuPd
-USART1.VirtualMode-Asynchronous=VM_ASYNC
-FREERTOS.configUSE_IDLE_HOOK=1
-PA9.Mode=Asynchronous
-PB4\ (NJTRST).GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-NVIC.TIM8_CC_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-PB14.PinState=GPIO_PIN_SET
-FREERTOS.configRECORD_STACK_HIGH_ADDRESS=1
-ProjectManager.TargetToolchain=Makefile
-PB10.GPIO_Label=DISPLAY_RST
-PB7.GPIOParameters=GPIO_Label
-VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Mode=CDC_FS
-PC5.GPIOParameters=GPIO_Label
-PC2.Locked=true
-ProjectManager.RegisterCallBack=
-PC15-OSC32_OUT\ (PC15).Locked=true
-RCC.USBFreq_Value=48000000
-TIM15.IPParameters=Channel-Output Compare1 CH1N
-PB14.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
-PA1.Signal=GPXTI1
-PB1.Locked=true
-PB15.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING
-PH1-OSC_OUT\ (PH1).Locked=true
-board=NUCLEO-L476RG
-SPI3.CLKPhase=SPI_PHASE_2EDGE
-PC7.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
-RCC.VCOOutputFreq_Value=128000000
-NVIC.SavedSystickIrqHandlerGenerated=true
-RCC.APB2Freq_Value=64000000
-RCC.UART4Freq_Value=64000000
-SPI3.CalculateBaudRate=1000.0 KBits/s
-MxCube.Version=6.0.1
-PA13\ (JTMS-SWDIO).GPIO_Label=TMS
-PC13.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-RCC.PLLSAI1QoutputFreq_Value=48000000
-RCC.ADCFreq_Value=64000000
-SPI3.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_64
-VP_ADC1_Vref_Input.Signal=ADC1_Vref_Input
-SH.S_TIM5_CH4.0=TIM5_CH4,PWM Generation4 CH4
-PC2.GPIO_PuPd=GPIO_PULLUP
-RCC.UART5Freq_Value=64000000
-PB15.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-ADC1.NbrOfConversion=1
-PA15\ (JTDI).GPIO_Label=CC1101_CS
-RCC.IPParameters=ADCCLockSelection,ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LCDFreq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLM,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1N,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PREFETCH_ENABLE,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
-ProjectManager.AskForMigrate=true
-Mcu.Name=STM32L476R(C-E-G)Tx
-NVIC.SavedPendsvIrqHandlerGenerated=true
-PA2.Signal=GPIO_Output
-PB2.Locked=true
-Mcu.IP8=SYS
-VP_FREERTOS_VS_CMSIS_V2.Signal=FREERTOS_VS_CMSIS_V2
-Mcu.IP9=TIM5
-Mcu.IP6=SPI1
-Mcu.IP7=SPI3
-ProjectManager.CoupleFile=true
-NVIC.EXTI0_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-RCC.SYSCLKFreq_VALUE=64000000
-PA1.Locked=true
-PA12.Mode=Device_Only
-SH.GPXTI4.0=GPIO_EXTI4
-RCC.PLLSAI2PoutputFreq_Value=9142857.142857144
-KeepUserPlacement=false
-TIM5.Prescaler=500 - 1
-PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-PC5.GPIO_Label=RFID_RF_IN
-PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
-SH.GPXTI9.ConfNb=1
-NVIC.EXTI9_5_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-SH.GPXTI4.ConfNb=1
-PC6.GPIOParameters=GPIO_Label
-RCC.HSI_VALUE=16000000
-ADC1.NbrOfConversionFlag=1
-SH.GPXTI15.0=GPIO_EXTI15
-RCC.PLLM=2
-RCC.PLLN=16
-TIM8.Channel-Input_Capture2_from_TI2=TIM_CHANNEL_2
-PB7.Locked=true
-PB8.Signal=GPXTI8
-PC8.Locked=true
-TIM5.Period=291
-PC9.Signal=GPIO_Output
-PA15\ (JTDI).Locked=true
-RCC.APB1Freq_Value=64000000
-USB_DEVICE.VirtualMode=Cdc
-PB11.Locked=true
-ProjectManager.DeviceId=STM32L476RGTx
-SH.S_TIM8_CH2.ConfNb=1
-PB12.Signal=GPIO_Analog
-ProjectManager.LibraryCopy=2
-PB0.GPIO_PuPd=GPIO_PULLDOWN
-PA3.GPIO_Label=SPEAKER
-PB1.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
-PA7.Signal=GPIO_Analog
-PB4\ (NJTRST).Signal=GPXTI4
-PA6.Locked=true

firmware/targets/f2/startup_stm32l476xx.s

@@ -1,509 +0,0 @@
-/**
-  ******************************************************************************
-  * @file      startup_stm32l476xx.s
-  * @author    MCD Application Team
-  * @brief     STM32L476xx devices vector table GCC toolchain.
-  *            This module performs:
-  *                - Set the initial SP
-  *                - Set the initial PC == Reset_Handler,
-  *                - Set the vector table entries with the exceptions ISR address,
-  *                - Configure the clock system  
-  *                - Branches to main in the C library (which eventually
-  *                  calls main()).
-  *            After Reset the Cortex-M4 processor is in Thread mode,
-  *            priority is Privileged, and the Stack is set to Main.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Apache License, Version 2.0,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/Apache-2.0
-  *
-  ******************************************************************************
-  */
-
-  .syntax unified
-	.cpu cortex-m4
-	.fpu softvfp
-	.thumb
-
-.global	g_pfnVectors
-.global	Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word	_sidata
-/* start address for the .data section. defined in linker script */
-.word	_sdata
-/* end address for the .data section. defined in linker script */
-.word	_edata
-/* start address for the .bss section. defined in linker script */
-.word	_sbss
-/* end address for the .bss section. defined in linker script */
-.word	_ebss
-
-.equ  BootRAM,        0xF1E0F85F
-/**
- * @brief  This is the code that gets called when the processor first
- *          starts execution following a reset event. Only the absolutely
- *          necessary set is performed, after which the application
- *          supplied main() routine is called.
- * @param  None
- * @retval : None
-*/
-
-    .section	.text.Reset_Handler
-	.weak	Reset_Handler
-	.type	Reset_Handler, %function
-Reset_Handler:
-  ldr   sp, =_estack    /* Set stack pointer */
-
-/* Call the clock system initialization function.*/
-    bl  SystemInit
-
-/* Copy the data segment initializers from flash to SRAM */
-  movs	r1, #0
-  b	LoopCopyDataInit
-
-CopyDataInit:
-	ldr	r3, =_sidata
-	ldr	r3, [r3, r1]
-	str	r3, [r0, r1]
-	adds	r1, r1, #4
-
-LoopCopyDataInit:
-	ldr	r0, =_sdata
-	ldr	r3, =_edata
-	adds	r2, r0, r1
-	cmp	r2, r3
-	bcc	CopyDataInit
-	ldr	r2, =_sbss
-	b	LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
-	movs	r3, #0
-	str	r3, [r2], #4
-
-LoopFillZerobss:
-	ldr	r3, = _ebss
-	cmp	r2, r3
-	bcc	FillZerobss
-
-/* Call static constructors */
-    bl __libc_init_array
-/* Call the application's entry point.*/
-	bl	main
-
-LoopForever:
-    b LoopForever
-    
-.size	Reset_Handler, .-Reset_Handler
-
-/**
- * @brief  This is the code that gets called when the processor receives an
- *         unexpected interrupt.  This simply enters an infinite loop, preserving
- *         the system state for examination by a debugger.
- *
- * @param  None
- * @retval : None
-*/
-    .section	.text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
-	b	Infinite_Loop
-	.size	Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex-M4.  Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- 	.section	.isr_vector,"a",%progbits
-	.type	g_pfnVectors, %object
-	.size	g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-	.word	_estack
-	.word	Reset_Handler
-	.word	NMI_Handler
-	.word	HardFault_Handler
-	.word	MemManage_Handler
-	.word	BusFault_Handler
-	.word	UsageFault_Handler
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	SVC_Handler
-	.word	DebugMon_Handler
-	.word	0
-	.word	PendSV_Handler
-	.word	SysTick_Handler
-	.word	WWDG_IRQHandler
-	.word	PVD_PVM_IRQHandler
-	.word	TAMP_STAMP_IRQHandler
-	.word	RTC_WKUP_IRQHandler
-	.word	FLASH_IRQHandler
-	.word	RCC_IRQHandler
-	.word	EXTI0_IRQHandler
-	.word	EXTI1_IRQHandler
-	.word	EXTI2_IRQHandler
-	.word	EXTI3_IRQHandler
-	.word	EXTI4_IRQHandler
-	.word	DMA1_Channel1_IRQHandler
-	.word	DMA1_Channel2_IRQHandler
-	.word	DMA1_Channel3_IRQHandler
-	.word	DMA1_Channel4_IRQHandler
-	.word	DMA1_Channel5_IRQHandler
-	.word	DMA1_Channel6_IRQHandler
-	.word	DMA1_Channel7_IRQHandler
-	.word	ADC1_2_IRQHandler
-	.word	CAN1_TX_IRQHandler
-	.word	CAN1_RX0_IRQHandler
-	.word	CAN1_RX1_IRQHandler
-	.word	CAN1_SCE_IRQHandler
-	.word	EXTI9_5_IRQHandler
-	.word	TIM1_BRK_TIM15_IRQHandler
-	.word	TIM1_UP_TIM16_IRQHandler
-	.word	TIM1_TRG_COM_TIM17_IRQHandler
-	.word	TIM1_CC_IRQHandler
-	.word	TIM2_IRQHandler
-	.word	TIM3_IRQHandler
-	.word	TIM4_IRQHandler
-	.word	I2C1_EV_IRQHandler
-	.word	I2C1_ER_IRQHandler
-	.word	I2C2_EV_IRQHandler
-	.word	I2C2_ER_IRQHandler
-	.word	SPI1_IRQHandler
-	.word	SPI2_IRQHandler
-	.word	USART1_IRQHandler
-	.word	USART2_IRQHandler
-	.word	USART3_IRQHandler
-	.word	EXTI15_10_IRQHandler
-	.word	RTC_Alarm_IRQHandler
-	.word	DFSDM1_FLT3_IRQHandler
-	.word	TIM8_BRK_IRQHandler
-	.word	TIM8_UP_IRQHandler
-	.word	TIM8_TRG_COM_IRQHandler
-	.word	TIM8_CC_IRQHandler
-	.word	ADC3_IRQHandler
-	.word	FMC_IRQHandler
-	.word	SDMMC1_IRQHandler
-	.word	TIM5_IRQHandler
-	.word	SPI3_IRQHandler
-	.word	UART4_IRQHandler
-	.word	UART5_IRQHandler
-	.word	TIM6_DAC_IRQHandler
-	.word	TIM7_IRQHandler
-	.word	DMA2_Channel1_IRQHandler
-	.word	DMA2_Channel2_IRQHandler
-	.word	DMA2_Channel3_IRQHandler
-	.word	DMA2_Channel4_IRQHandler
-	.word	DMA2_Channel5_IRQHandler
-	.word	DFSDM1_FLT0_IRQHandler
-	.word	DFSDM1_FLT1_IRQHandler
-	.word	DFSDM1_FLT2_IRQHandler
-	.word	COMP_IRQHandler
-	.word	LPTIM1_IRQHandler
-	.word	LPTIM2_IRQHandler
-	.word	OTG_FS_IRQHandler
-	.word	DMA2_Channel6_IRQHandler
-	.word	DMA2_Channel7_IRQHandler
-	.word	LPUART1_IRQHandler
-	.word	QUADSPI_IRQHandler
-	.word	I2C3_EV_IRQHandler
-	.word	I2C3_ER_IRQHandler
-	.word	SAI1_IRQHandler
-	.word	SAI2_IRQHandler
-	.word	SWPMI1_IRQHandler
-	.word	TSC_IRQHandler
-	.word	LCD_IRQHandler
-	.word 0
-	.word	RNG_IRQHandler
-	.word	FPU_IRQHandler
-
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
-  .weak	NMI_Handler
-	.thumb_set NMI_Handler,Default_Handler
-
-  .weak	HardFault_Handler
-	.thumb_set HardFault_Handler,Default_Handler
-
-  .weak	MemManage_Handler
-	.thumb_set MemManage_Handler,Default_Handler
-
-  .weak	BusFault_Handler
-	.thumb_set BusFault_Handler,Default_Handler
-
-	.weak	UsageFault_Handler
-	.thumb_set UsageFault_Handler,Default_Handler
-
-	.weak	SVC_Handler
-	.thumb_set SVC_Handler,Default_Handler
-
-	.weak	DebugMon_Handler
-	.thumb_set DebugMon_Handler,Default_Handler
-
-	.weak	PendSV_Handler
-	.thumb_set PendSV_Handler,Default_Handler
-
-	.weak	SysTick_Handler
-	.thumb_set SysTick_Handler,Default_Handler
-
-	.weak	WWDG_IRQHandler
-	.thumb_set WWDG_IRQHandler,Default_Handler
-
-	.weak	PVD_PVM_IRQHandler
-	.thumb_set PVD_PVM_IRQHandler,Default_Handler
-
-	.weak	TAMP_STAMP_IRQHandler
-	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
-
-	.weak	RTC_WKUP_IRQHandler
-	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
-
-	.weak	FLASH_IRQHandler
-	.thumb_set FLASH_IRQHandler,Default_Handler
-
-	.weak	RCC_IRQHandler
-	.thumb_set RCC_IRQHandler,Default_Handler
-
-	.weak	EXTI0_IRQHandler
-	.thumb_set EXTI0_IRQHandler,Default_Handler
-
-	.weak	EXTI1_IRQHandler
-	.thumb_set EXTI1_IRQHandler,Default_Handler
-
-	.weak	EXTI2_IRQHandler
-	.thumb_set EXTI2_IRQHandler,Default_Handler
-
-	.weak	EXTI3_IRQHandler
-	.thumb_set EXTI3_IRQHandler,Default_Handler
-
-	.weak	EXTI4_IRQHandler
-	.thumb_set EXTI4_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel1_IRQHandler
-	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel2_IRQHandler
-	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel3_IRQHandler
-	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel4_IRQHandler
-	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel5_IRQHandler
-	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel6_IRQHandler
-	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel7_IRQHandler
-	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
-	.weak	ADC1_2_IRQHandler
-	.thumb_set ADC1_2_IRQHandler,Default_Handler
-
-	.weak	CAN1_TX_IRQHandler
-	.thumb_set CAN1_TX_IRQHandler,Default_Handler
-
-	.weak	CAN1_RX0_IRQHandler
-	.thumb_set CAN1_RX0_IRQHandler,Default_Handler
-
-	.weak	CAN1_RX1_IRQHandler
-	.thumb_set CAN1_RX1_IRQHandler,Default_Handler
-
-	.weak	CAN1_SCE_IRQHandler
-	.thumb_set CAN1_SCE_IRQHandler,Default_Handler
-
-	.weak	EXTI9_5_IRQHandler
-	.thumb_set EXTI9_5_IRQHandler,Default_Handler
-
-	.weak	TIM1_BRK_TIM15_IRQHandler
-	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
-
-	.weak	TIM1_UP_TIM16_IRQHandler
-	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
-
-	.weak	TIM1_TRG_COM_TIM17_IRQHandler
-	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
-
-	.weak	TIM1_CC_IRQHandler
-	.thumb_set TIM1_CC_IRQHandler,Default_Handler
-
-	.weak	TIM2_IRQHandler
-	.thumb_set TIM2_IRQHandler,Default_Handler
-
-	.weak	TIM3_IRQHandler
-	.thumb_set TIM3_IRQHandler,Default_Handler
-
-	.weak	TIM4_IRQHandler
-	.thumb_set TIM4_IRQHandler,Default_Handler
-
-	.weak	I2C1_EV_IRQHandler
-	.thumb_set I2C1_EV_IRQHandler,Default_Handler
-
-	.weak	I2C1_ER_IRQHandler
-	.thumb_set I2C1_ER_IRQHandler,Default_Handler
-
-	.weak	I2C2_EV_IRQHandler
-	.thumb_set I2C2_EV_IRQHandler,Default_Handler
-
-	.weak	I2C2_ER_IRQHandler
-	.thumb_set I2C2_ER_IRQHandler,Default_Handler
-
-	.weak	SPI1_IRQHandler
-	.thumb_set SPI1_IRQHandler,Default_Handler
-
-	.weak	SPI2_IRQHandler
-	.thumb_set SPI2_IRQHandler,Default_Handler
-
-	.weak	USART1_IRQHandler
-	.thumb_set USART1_IRQHandler,Default_Handler
-
-	.weak	USART2_IRQHandler
-	.thumb_set USART2_IRQHandler,Default_Handler
-
-	.weak	USART3_IRQHandler
-	.thumb_set USART3_IRQHandler,Default_Handler
-
-	.weak	EXTI15_10_IRQHandler
-	.thumb_set EXTI15_10_IRQHandler,Default_Handler
-
-	.weak	RTC_Alarm_IRQHandler
-	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
-	.weak	DFSDM1_FLT3_IRQHandler
-	.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
-
-	.weak	TIM8_BRK_IRQHandler
-	.thumb_set TIM8_BRK_IRQHandler,Default_Handler
-
-	.weak	TIM8_UP_IRQHandler
-	.thumb_set TIM8_UP_IRQHandler,Default_Handler
-
-	.weak	TIM8_TRG_COM_IRQHandler
-	.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
-
-	.weak	TIM8_CC_IRQHandler
-	.thumb_set TIM8_CC_IRQHandler,Default_Handler
-
-	.weak	ADC3_IRQHandler
-	.thumb_set ADC3_IRQHandler,Default_Handler
-
-	.weak	FMC_IRQHandler
-	.thumb_set FMC_IRQHandler,Default_Handler
-
-	.weak	SDMMC1_IRQHandler
-	.thumb_set SDMMC1_IRQHandler,Default_Handler
-
-	.weak	TIM5_IRQHandler
-	.thumb_set TIM5_IRQHandler,Default_Handler
-
-	.weak	SPI3_IRQHandler
-	.thumb_set SPI3_IRQHandler,Default_Handler
-
-	.weak	UART4_IRQHandler
-	.thumb_set UART4_IRQHandler,Default_Handler
-
-	.weak	UART5_IRQHandler
-	.thumb_set UART5_IRQHandler,Default_Handler
-
-	.weak	TIM6_DAC_IRQHandler
-	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
-	.weak	TIM7_IRQHandler
-	.thumb_set TIM7_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel1_IRQHandler
-	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel2_IRQHandler
-	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel3_IRQHandler
-	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel4_IRQHandler
-	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel5_IRQHandler
-	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
-
-	.weak	DFSDM1_FLT0_IRQHandler
-	.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler	
-	
-	.weak	DFSDM1_FLT1_IRQHandler
-	.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler	
-	
-	.weak	DFSDM1_FLT2_IRQHandler
-	.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler	
-	
-	.weak	COMP_IRQHandler
-	.thumb_set COMP_IRQHandler,Default_Handler
-	
-	.weak	LPTIM1_IRQHandler
-	.thumb_set LPTIM1_IRQHandler,Default_Handler
-	
-	.weak	LPTIM2_IRQHandler
-	.thumb_set LPTIM2_IRQHandler,Default_Handler	
-	
-	.weak	OTG_FS_IRQHandler
-	.thumb_set OTG_FS_IRQHandler,Default_Handler	
-	
-	.weak	DMA2_Channel6_IRQHandler
-	.thumb_set DMA2_Channel6_IRQHandler,Default_Handler	
-	
-	.weak	DMA2_Channel7_IRQHandler
-	.thumb_set DMA2_Channel7_IRQHandler,Default_Handler	
-	
-	.weak	LPUART1_IRQHandler
-	.thumb_set LPUART1_IRQHandler,Default_Handler	
-	
-	.weak	QUADSPI_IRQHandler
-	.thumb_set QUADSPI_IRQHandler,Default_Handler	
-	
-	.weak	I2C3_EV_IRQHandler
-	.thumb_set I2C3_EV_IRQHandler,Default_Handler	
-	
-	.weak	I2C3_ER_IRQHandler
-	.thumb_set I2C3_ER_IRQHandler,Default_Handler	
-	
-	.weak	SAI1_IRQHandler
-	.thumb_set SAI1_IRQHandler,Default_Handler
-	
-	.weak	SAI2_IRQHandler
-	.thumb_set SAI2_IRQHandler,Default_Handler
-	
-	.weak	SWPMI1_IRQHandler
-	.thumb_set SWPMI1_IRQHandler,Default_Handler
-	
-	.weak	TSC_IRQHandler
-	.thumb_set TSC_IRQHandler,Default_Handler
-	
-	.weak	LCD_IRQHandler
-	.thumb_set LCD_IRQHandler,Default_Handler
-	
-	.weak	RNG_IRQHandler
-	.thumb_set RNG_IRQHandler,Default_Handler
-	
-	.weak	FPU_IRQHandler
-	.thumb_set FPU_IRQHandler,Default_Handler
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/target.mk

@@ -1,104 +0,0 @@
-TOOLCHAIN = arm
-
-OPENOCD_OPTS	= -f interface/stlink.cfg -c "transport select hla_swd" -f target/stm32l4x.cfg -c "init" -c "adapter speed 4000"
-
-BOOT_ADDRESS	= 0x08000000
-FW_ADDRESS		= 0x08008000
-OS_OFFSET		= 0x00008000
-FLASH_ADDRESS	= 0x08008000
-
-NO_BOOTLOADER ?= 0
-ifeq ($(NO_BOOTLOADER), 1)
-BOOT_ADDRESS	= 0x08000000
-FW_ADDRESS		= 0x08000000
-OS_OFFSET		= 0x00000000
-FLASH_ADDRESS	= 0x08000000
-CFLAGS			+= -DNO_BOOTLOADER
-endif
-
-BOOT_CFLAGS		= -DBOOT_ADDRESS=$(BOOT_ADDRESS) -DFW_ADDRESS=$(FW_ADDRESS) -DOS_OFFSET=$(OS_OFFSET)
-MCU_FLAGS		= -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
-
-CFLAGS			+= $(MCU_FLAGS) $(BOOT_CFLAGS) -DSTM32L476xx -Wall -fdata-sections -ffunction-sections
-LDFLAGS			+= $(MCU_FLAGS) -specs=nosys.specs -specs=nano.specs 
-
-CPPFLAGS		+= -fno-rtti -fno-use-cxa-atexit -fno-exceptions
-LDFLAGS			+= -Wl,--start-group -lstdc++ -lsupc++ -Wl,--end-group
-
-CUBE_DIR		= ../lib/STM32CubeL4
-C_SOURCES		+= \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pcd.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pcd_ex.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_ll_usb.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc_ex.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_comp.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c \
-	$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c \
-	$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/croutine.c \
-	$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c \
-	$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/list.c \
-	$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/queue.c \
-	$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c \
-	$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/tasks.c \
-	$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/timers.c \
-	$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.c \
-	$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c \
-	$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c \
-	$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \
-	$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \
-	$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c \
-	$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c \
-	$(wildcard $(TARGET_DIR)/Src/*.c) \
-	$(wildcard $(TARGET_DIR)/Src/fatfs/*.c) \
-	$(wildcard $(TARGET_DIR)/api-hal/*.c)
-
-ASM_SOURCES += $(TARGET_DIR)/startup_stm32l476xx.s
-
-# Common
-CFLAGS			+= \
-	-DUSE_HAL_DRIVER \
-	-DHAVE_FREERTOS \
-	-DDEBUG_UART=huart1
-
-ifeq ($(NO_BOOTLOADER), 1)
-LDFLAGS			+= -T$(TARGET_DIR)/STM32L476RGTx_FLASH_NO_BOOT.ld
-else
-LDFLAGS			+= -T$(TARGET_DIR)/STM32L476RGTx_FLASH.ld
-endif
-
-CFLAGS += \
-	-I$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Inc \
-	-I$(CUBE_DIR)/Drivers/STM32L4xx_HAL_Driver/Inc/Legacy \
-	-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/include \
-	-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2 \
-	-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F \
-	-I$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Inc \
-	-I$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc \
-	-I$(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32L4xx/Include \
-	-I$(CUBE_DIR)/Drivers/CMSIS/Include \
-	-I$(TARGET_DIR)/Inc \
-	-I$(TARGET_DIR)/Src/fatfs \
-	-I$(TARGET_DIR)/api-hal
-
-SVD_FILE = ../debug/STM32L4x6.svd

firmware/targets/f3/Inc/main.h

@@ -1,200 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : main.h
-  * @brief          : Header for main.c file.
-  *                   This file contains the common defines of the application.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __MAIN_H
-#define __MAIN_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32wbxx_hal.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-/* Exported functions prototypes ---------------------------------------------*/
-void Error_Handler(void);
-
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-/* Private defines -----------------------------------------------------------*/
-#define BUTTON_BACK_Pin GPIO_PIN_13
-#define BUTTON_BACK_GPIO_Port GPIOC
-#define BUTTON_BACK_EXTI_IRQn EXTI15_10_IRQn
-#define QUARTZ_32MHZ_IN_Pin GPIO_PIN_14
-#define QUARTZ_32MHZ_IN_GPIO_Port GPIOC
-#define QUARTZ_32MHZ_OUT_Pin GPIO_PIN_15
-#define QUARTZ_32MHZ_OUT_GPIO_Port GPIOC
-#define BOOT0_Pin GPIO_PIN_3
-#define BOOT0_GPIO_Port GPIOH
-#define SPEAKER_Pin GPIO_PIN_8
-#define SPEAKER_GPIO_Port GPIOB
-#define IR_TX_Pin GPIO_PIN_9
-#define IR_TX_GPIO_Port GPIOB
-#define PC0_Pin GPIO_PIN_0
-#define PC0_GPIO_Port GPIOC
-#define PC1_Pin GPIO_PIN_1
-#define PC1_GPIO_Port GPIOC
-#define BUTTON_OK_Pin GPIO_PIN_2
-#define BUTTON_OK_GPIO_Port GPIOC
-#define BUTTON_OK_EXTI_IRQn EXTI2_IRQn
-#define PC3_Pin GPIO_PIN_3
-#define PC3_GPIO_Port GPIOC
-#define IR_RX_Pin GPIO_PIN_0
-#define IR_RX_GPIO_Port GPIOA
-#define LED_RED_Pin GPIO_PIN_1
-#define LED_RED_GPIO_Port GPIOA
-#define LED_GREEN_Pin GPIO_PIN_2
-#define LED_GREEN_GPIO_Port GPIOA
-#define LED_BLUE_Pin GPIO_PIN_3
-#define LED_BLUE_GPIO_Port GPIOA
-#define PA4_Pin GPIO_PIN_4
-#define PA4_GPIO_Port GPIOA
-#define PA5_Pin GPIO_PIN_5
-#define PA5_GPIO_Port GPIOA
-#define PA6_Pin GPIO_PIN_6
-#define PA6_GPIO_Port GPIOA
-#define PA7_Pin GPIO_PIN_7
-#define PA7_GPIO_Port GPIOA
-#define RFID_PULL_Pin GPIO_PIN_8
-#define RFID_PULL_GPIO_Port GPIOA
-#define RFID_PULL_EXTI_IRQn EXTI9_5_IRQn
-#define I2C_SCL_Pin GPIO_PIN_9
-#define I2C_SCL_GPIO_Port GPIOA
-#define CC1101_G0_Pin GPIO_PIN_4
-#define CC1101_G0_GPIO_Port GPIOC
-#define RFID_RF_IN_Pin GPIO_PIN_5
-#define RFID_RF_IN_GPIO_Port GPIOC
-#define PB2_Pin GPIO_PIN_2
-#define PB2_GPIO_Port GPIOB
-#define BUTTON_UP_Pin GPIO_PIN_10
-#define BUTTON_UP_GPIO_Port GPIOB
-#define BUTTON_UP_EXTI_IRQn EXTI15_10_IRQn
-#define BUTTON_LEFT_Pin GPIO_PIN_11
-#define BUTTON_LEFT_GPIO_Port GPIOB
-#define BUTTON_LEFT_EXTI_IRQn EXTI15_10_IRQn
-#define DISPLAY_RST_Pin GPIO_PIN_0
-#define DISPLAY_RST_GPIO_Port GPIOB
-#define BUTTON_DOWN_Pin GPIO_PIN_1
-#define BUTTON_DOWN_GPIO_Port GPIOB
-#define BUTTON_DOWN_EXTI_IRQn EXTI1_IRQn
-#define NFC_CS_Pin GPIO_PIN_4
-#define NFC_CS_GPIO_Port GPIOE
-#define BUTTON_RIGHT_Pin GPIO_PIN_12
-#define BUTTON_RIGHT_GPIO_Port GPIOB
-#define BUTTON_RIGHT_EXTI_IRQn EXTI15_10_IRQn
-#define RFID_OUT_Pin GPIO_PIN_13
-#define RFID_OUT_GPIO_Port GPIOB
-#define iBTN_Pin GPIO_PIN_14
-#define iBTN_GPIO_Port GPIOB
-#define SPI_D_MOSI_Pin GPIO_PIN_15
-#define SPI_D_MOSI_GPIO_Port GPIOB
-#define DISPLAY_DI_Pin GPIO_PIN_6
-#define DISPLAY_DI_GPIO_Port GPIOC
-#define I2C_SDA_Pin GPIO_PIN_10
-#define I2C_SDA_GPIO_Port GPIOA
-#define DISPLAY_BACKLIGHT_Pin GPIO_PIN_15
-#define DISPLAY_BACKLIGHT_GPIO_Port GPIOA
-#define PC10_Pin GPIO_PIN_10
-#define PC10_GPIO_Port GPIOC
-#define DISPLAY_CS_Pin GPIO_PIN_11
-#define DISPLAY_CS_GPIO_Port GPIOC
-#define SD_CS_Pin GPIO_PIN_12
-#define SD_CS_GPIO_Port GPIOC
-#define CC1101_CS_Pin GPIO_PIN_0
-#define CC1101_CS_GPIO_Port GPIOD
-#define SPI_D_SCK_Pin GPIO_PIN_1
-#define SPI_D_SCK_GPIO_Port GPIOD
-#define SPI_R_SCK_Pin GPIO_PIN_3
-#define SPI_R_SCK_GPIO_Port GPIOB
-#define SPI_R_MISO_Pin GPIO_PIN_4
-#define SPI_R_MISO_GPIO_Port GPIOB
-#define SPI_R_MOSI_Pin GPIO_PIN_5
-#define SPI_R_MOSI_GPIO_Port GPIOB
-/* USER CODE BEGIN Private defines */
-
-#define MISO_PIN GpioPin{.port = SPI_R_MISO_GPIO_Port, .pin = SPI_R_MISO_Pin}
-
-#define SPI_R hspi1
-#define SPI_D hspi2
-#define SPI_SD_HANDLE SPI_R
-
-extern TIM_HandleTypeDef htim1;
-extern TIM_HandleTypeDef htim2;
-extern TIM_HandleTypeDef htim16;
-
-#define TIM_A htim1
-#define TIM_B htim2
-#define TIM_C htim16
-
-#define SPEAKER_TIM htim16
-#define SPEAKER_CH TIM_CHANNEL_1
-
-#define LFRFID_TIM htim1
-#define LFRFID_CH TIM_CHANNEL_1
-
-#define IRDA_TX_TIM htim1
-#define IRDA_TX_CH TIM_CHANNEL_3
-
-// only for reference
-// IRDA RX timer dont exist in F2
-// and timer need more data to init (NVIC IRQn to set priority)
-#define IRDA_RX_TIM htim2
-#define IRDA_RX_FALLING_CH TIM_CHANNEL_1
-#define IRDA_RX_RISING_CH TIM_CHANNEL_2
-
-#define NFC_IRQ_Pin RFID_PULL_Pin
-#define NFC_IRQ_GPIO_Port RFID_PULL_GPIO_Port
-
-#define VIBRO_Pin GPIO_PIN_10
-#define VIBRO_GPIO_Port GPIOC
-
-/* USER CODE END Private defines */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __MAIN_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Inc/stm32wbxx_it.h

@@ -1,78 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32wbxx_it.h
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
- ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32WBxx_IT_H
-#define __STM32WBxx_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
-
-/* USER CODE END ET */
-
-/* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
-
-/* USER CODE END EC */
-
-/* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
-
-/* USER CODE END EM */
-
-/* Exported functions prototypes ---------------------------------------------*/
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void DebugMon_Handler(void);
-void TAMP_STAMP_LSECSS_IRQHandler(void);
-void RCC_IRQHandler(void);
-void EXTI1_IRQHandler(void);
-void EXTI2_IRQHandler(void);
-void ADC1_IRQHandler(void);
-void USB_LP_IRQHandler(void);
-void COMP_IRQHandler(void);
-void EXTI9_5_IRQHandler(void);
-void TIM1_TRG_COM_TIM17_IRQHandler(void);
-void TIM2_IRQHandler(void);
-void EXTI15_10_IRQHandler(void);
-void HSEM_IRQHandler(void);
-/* USER CODE BEGIN EFP */
-
-/* USER CODE END EFP */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32WBxx_IT_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Src/fatfs/fatfs.c

@@ -1,56 +0,0 @@
-/**
-  ******************************************************************************
-  * @file   fatfs.c
-  * @brief  Code for fatfs applications
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-#include "fatfs.h"
-
-uint8_t retUSER;    /* Return value for USER */
-char USERPath[4];   /* USER logical drive path */
-FATFS USERFatFS;    /* File system object for USER logical drive */
-FIL USERFile;       /* File object for USER */
-
-/* USER CODE BEGIN Variables */
-
-/* USER CODE END Variables */    
-
-void MX_FATFS_Init(void) 
-{
-  /*## FatFS: Link the USER driver ###########################*/
-  retUSER = FATFS_LinkDriver(&USER_Driver, USERPath);
-
-  /* USER CODE BEGIN Init */
-  /* additional user code for init */     
-  /* USER CODE END Init */
-}
-
-/**
-  * @brief  Gets Time from RTC 
-  * @param  None
-  * @retval Time in DWORD
-  */
-DWORD get_fattime(void)
-{
-  /* USER CODE BEGIN get_fattime */
-  return 0;
-  /* USER CODE END get_fattime */  
-}
-
-/* USER CODE BEGIN Application */
-     
-/* USER CODE END Application */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Src/fatfs/fatfs.h

@@ -1,49 +0,0 @@
-/**
-  ******************************************************************************
-  * @file   fatfs.h
-  * @brief  Header for fatfs applications
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __fatfs_H
-#define __fatfs_H
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "fatfs/ff.h"
-#include "fatfs/ff_gen_drv.h"
-#include "user_diskio.h" /* defines USER_Driver as external */
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern uint8_t retUSER; /* Return value for USER */
-extern char USERPath[4]; /* USER logical drive path */
-extern FATFS USERFatFS; /* File system object for USER logical drive */
-extern FIL USERFile; /* File object for USER */
-
-void MX_FATFS_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-#ifdef __cplusplus
-}
-#endif
-#endif /*__fatfs_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Src/fatfs/spi_sd_hal.c

@@ -1,124 +0,0 @@
-#include "main.h"
-
-#define SD_DUMMY_BYTE 0xFF
-#define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_Port, SD_CS_Pin, GPIO_PIN_RESET)
-#define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_Port, SD_CS_Pin, GPIO_PIN_SET)
-
-const uint32_t SpiTimeout = 1000;
-extern SPI_HandleTypeDef SPI_SD_HANDLE;
-uint8_t SD_IO_WriteByte(uint8_t Data);
-
-/******************************************************************************
-                            BUS OPERATIONS
- *******************************************************************************/
-
-/**
- * @brief  SPI error treatment function
- * @retval None
- */
-static void SPIx_Error(void) {
-    /* De-initialize the SPI communication BUS */
-    HAL_SPI_DeInit(&SPI_SD_HANDLE);
-
-    /* Re-Initiaize the SPI communication BUS */
-    HAL_SPI_Init(&SPI_SD_HANDLE);
-}
-
-/**
- * @brief  SPI Write byte(s) to device
- * @param  DataIn: Pointer to data buffer to write
- * @param  DataOut: Pointer to data buffer for read data
- * @param  DataLength: number of bytes to write
- * @retval None
- */
-static void SPIx_WriteReadData(const uint8_t* DataIn, uint8_t* DataOut, uint16_t DataLength) {
-    HAL_StatusTypeDef status = HAL_OK;
-    status =
-        HAL_SPI_TransmitReceive(&SPI_SD_HANDLE, (uint8_t*)DataIn, DataOut, DataLength, SpiTimeout);
-
-    /* Check the communication status */
-    if(status != HAL_OK) {
-        /* Execute user timeout callback */
-        SPIx_Error();
-    }
-}
-
-/**
- * @brief  SPI Write a byte to device
- * @param  Value: value to be written
- * @retval None
- */
-__attribute__((unused)) static void SPIx_Write(uint8_t Value) {
-    HAL_StatusTypeDef status = HAL_OK;
-    uint8_t data;
-
-    status = HAL_SPI_TransmitReceive(&SPI_SD_HANDLE, (uint8_t*)&Value, &data, 1, SpiTimeout);
-
-    /* Check the communication status */
-    if(status != HAL_OK) {
-        /* Execute user timeout callback */
-        SPIx_Error();
-    }
-}
-
-/******************************************************************************
-                            LINK OPERATIONS
- *******************************************************************************/
-
-/********************************* LINK SD ************************************/
-/**
- * @brief  Initialize the SD Card and put it into StandBy State (Ready for
- *         data transfer).
- * @retval None
- */
-void SD_IO_Init(void) {
-    uint8_t counter = 0;
-
-    /* SD chip select high */
-    SD_CS_HIGH();
-
-    /* Send dummy byte 0xFF, 10 times with CS high */
-    /* Rise CS and MOSI for 80 clocks cycles */
-    for(counter = 0; counter <= 200; counter++) {
-        /* Send dummy byte 0xFF */
-        SD_IO_WriteByte(SD_DUMMY_BYTE);
-    }
-}
-
-/**
- * @brief  Set SD interface Chip Select state
- * @param  val: 0 (low) or 1 (high) state
- * @retval None
- */
-void SD_IO_CSState(uint8_t val) {
-    if(val == 1) {
-        SD_CS_HIGH();
-    } else {
-        SD_CS_LOW();
-    }
-}
-
-/**
- * @brief  Write byte(s) on the SD
- * @param  DataIn: Pointer to data buffer to write
- * @param  DataOut: Pointer to data buffer for read data
- * @param  DataLength: number of bytes to write
- * @retval None
- */
-void SD_IO_WriteReadData(const uint8_t* DataIn, uint8_t* DataOut, uint16_t DataLength) {
-    /* Send the byte */
-    SPIx_WriteReadData(DataIn, DataOut, DataLength);
-}
-
-/**
- * @brief  Write a byte on the SD.
- * @param  Data: byte to send.
- * @retval Data written
- */
-uint8_t SD_IO_WriteByte(uint8_t Data) {
-    uint8_t tmp;
-
-    /* Send the byte */
-    SPIx_WriteReadData(&Data, &tmp, 1);
-    return tmp;
-}

firmware/targets/f3/Src/fatfs/stm32_adafruit_sd.c

@@ -1,1013 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32_adafruit_sd.c
-  * @author  MCD Application Team
-  * @version V3.0.0
-  * @date    23-December-2016
-  * @brief   This file provides a set of functions needed to manage the SD card
-  *          mounted on the Adafruit 1.8" TFT LCD shield (reference ID 802),
-  *          that is used with the STM32 Nucleo board through SPI interface.
-  *          It implements a high level communication layer for read and write 
-  *          from/to this memory. The needed STM32XXxx hardware resources (SPI and 
-  *          GPIO) are defined in stm32XXxx_nucleo.h file, and the initialization is 
-  *          performed in SD_IO_Init() function declared in stm32XXxx_nucleo.c 
-  *          file.
-  *          You can easily tailor this driver to any other development board, 
-  *          by just adapting the defines for hardware resources and 
-  *          SD_IO_Init() function.
-  *            
-  *          +-------------------------------------------------------+
-  *          |                     Pin assignment                    |
-  *          +-------------------------+---------------+-------------+
-  *          |  STM32XXxx SPI Pins     |     SD        |    Pin      |
-  *          +-------------------------+---------------+-------------+
-  *          | SD_SPI_CS_PIN           |   ChipSelect  |    1        |
-  *          | SD_SPI_MOSI_PIN / MOSI  |   DataIn      |    2        |
-  *          |                         |   GND         |    3 (0 V)  |
-  *          |                         |   VDD         |    4 (3.3 V)|
-  *          | SD_SPI_SCK_PIN / SCLK   |   Clock       |    5        |
-  *          |                         |   GND         |    6 (0 V)  |
-  *          | SD_SPI_MISO_PIN / MISO  |   DataOut     |    7        |
-  *          +-------------------------+---------------+-------------+
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* File Info : -----------------------------------------------------------------
-                                   User NOTES
-1. How to use this driver:
---------------------------
-   - This driver does not need a specific component driver for the micro SD device
-     to be included with.
-
-2. Driver description:
----------------------
-  + Initialization steps:
-     o Initialize the micro SD card using the BSP_SD_Init() function. 
-     o Checking the SD card presence is not managed because SD detection pin is
-       not physically mapped on the Adafruit shield.
-     o The function BSP_SD_GetCardInfo() is used to get the micro SD card information 
-       which is stored in the structure "SD_CardInfo".
-  
-  + Micro SD card operations
-     o The micro SD card can be accessed with read/write block(s) operations once 
-       it is ready for access. The access can be performed in polling 
-       mode by calling the functions BSP_SD_ReadBlocks()/BSP_SD_WriteBlocks()
-       
-     o The SD erase block(s) is performed using the function BSP_SD_Erase() with 
-       specifying the number of blocks to erase.
-     o The SD runtime status is returned when calling the function BSP_SD_GetStatus().
-     
-------------------------------------------------------------------------------*/
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32_adafruit_sd.h"
-#include "stdlib.h"
-#include "string.h"
-#include "stdio.h"
-#include "spi.h"
-
-/** @addtogroup BSP
-  * @{
-  */
-
-/** @addtogroup STM32_ADAFRUIT
-  * @{
-  */
-
-/** @defgroup STM32_ADAFRUIT_SD
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-
-/** @defgroup STM32_ADAFRUIT_SD_Private_Types_Definitions
-  * @{
-  */
-typedef struct {
-    uint8_t r1;
-    uint8_t r2;
-    uint8_t r3;
-    uint8_t r4;
-    uint8_t r5;
-} SD_CmdAnswer_typedef;
-
-/**
-  * @}
-  */
-
-/* Private define ------------------------------------------------------------*/
-
-/** @defgroup STM32_ADAFRUIT_SD_Private_Defines
-  * @{
-  */
-#define SD_DUMMY_BYTE 0xFF
-
-#define SD_MAX_FRAME_LENGTH 17 /* Lenght = 16 + 1 */
-#define SD_CMD_LENGTH 6
-
-#define SD_MAX_TRY 100 /* Number of try */
-
-#define SD_CSD_STRUCT_V1 0x2 /* CSD struct version V1 */
-#define SD_CSD_STRUCT_V2 0x1 /* CSD struct version V2 */
-
-/**
-  * @brief  SD ansewer format
-  */
-typedef enum {
-    SD_ANSWER_R1_EXPECTED,
-    SD_ANSWER_R1B_EXPECTED,
-    SD_ANSWER_R2_EXPECTED,
-    SD_ANSWER_R3_EXPECTED,
-    SD_ANSWER_R4R5_EXPECTED,
-    SD_ANSWER_R7_EXPECTED,
-} SD_Answer_type;
-
-/**
-  * @brief  Start Data tokens:
-  *         Tokens (necessary because at nop/idle (and CS active) only 0xff is 
-  *         on the data/command line)  
-  */
-#define SD_TOKEN_START_DATA_SINGLE_BLOCK_READ \
-    0xFE /* Data token start byte, Start Single Block Read */
-#define SD_TOKEN_START_DATA_MULTIPLE_BLOCK_READ \
-    0xFE /* Data token start byte, Start Multiple Block Read */
-#define SD_TOKEN_START_DATA_SINGLE_BLOCK_WRITE \
-    0xFE /* Data token start byte, Start Single Block Write */
-#define SD_TOKEN_START_DATA_MULTIPLE_BLOCK_WRITE \
-    0xFD /* Data token start byte, Start Multiple Block Write */
-#define SD_TOKEN_STOP_DATA_MULTIPLE_BLOCK_WRITE \
-    0xFD /* Data toke stop byte, Stop Multiple Block Write */
-
-/**
-  * @brief  Commands: CMDxx = CMD-number | 0x40
-  */
-#define SD_CMD_GO_IDLE_STATE 0 /* CMD0 = 0x40  */
-#define SD_CMD_SEND_OP_COND 1 /* CMD1 = 0x41  */
-#define SD_CMD_SEND_IF_COND 8 /* CMD8 = 0x48  */
-#define SD_CMD_SEND_CSD 9 /* CMD9 = 0x49  */
-#define SD_CMD_SEND_CID 10 /* CMD10 = 0x4A */
-#define SD_CMD_STOP_TRANSMISSION 12 /* CMD12 = 0x4C */
-#define SD_CMD_SEND_STATUS 13 /* CMD13 = 0x4D */
-#define SD_CMD_SET_BLOCKLEN 16 /* CMD16 = 0x50 */
-#define SD_CMD_READ_SINGLE_BLOCK 17 /* CMD17 = 0x51 */
-#define SD_CMD_READ_MULT_BLOCK 18 /* CMD18 = 0x52 */
-#define SD_CMD_SET_BLOCK_COUNT 23 /* CMD23 = 0x57 */
-#define SD_CMD_WRITE_SINGLE_BLOCK 24 /* CMD24 = 0x58 */
-#define SD_CMD_WRITE_MULT_BLOCK 25 /* CMD25 = 0x59 */
-#define SD_CMD_PROG_CSD 27 /* CMD27 = 0x5B */
-#define SD_CMD_SET_WRITE_PROT 28 /* CMD28 = 0x5C */
-#define SD_CMD_CLR_WRITE_PROT 29 /* CMD29 = 0x5D */
-#define SD_CMD_SEND_WRITE_PROT 30 /* CMD30 = 0x5E */
-#define SD_CMD_SD_ERASE_GRP_START 32 /* CMD32 = 0x60 */
-#define SD_CMD_SD_ERASE_GRP_END 33 /* CMD33 = 0x61 */
-#define SD_CMD_UNTAG_SECTOR 34 /* CMD34 = 0x62 */
-#define SD_CMD_ERASE_GRP_START 35 /* CMD35 = 0x63 */
-#define SD_CMD_ERASE_GRP_END 36 /* CMD36 = 0x64 */
-#define SD_CMD_UNTAG_ERASE_GROUP 37 /* CMD37 = 0x65 */
-#define SD_CMD_ERASE 38 /* CMD38 = 0x66 */
-#define SD_CMD_SD_APP_OP_COND 41 /* CMD41 = 0x69 */
-#define SD_CMD_APP_CMD 55 /* CMD55 = 0x77 */
-#define SD_CMD_READ_OCR 58 /* CMD55 = 0x79 */
-
-/**
-  * @brief  SD reponses and error flags
-  */
-typedef enum {
-    /* R1 answer value */
-    SD_R1_NO_ERROR = (0x00),
-    SD_R1_IN_IDLE_STATE = (0x01),
-    SD_R1_ERASE_RESET = (0x02),
-    SD_R1_ILLEGAL_COMMAND = (0x04),
-    SD_R1_COM_CRC_ERROR = (0x08),
-    SD_R1_ERASE_SEQUENCE_ERROR = (0x10),
-    SD_R1_ADDRESS_ERROR = (0x20),
-    SD_R1_PARAMETER_ERROR = (0x40),
-
-    /* R2 answer value */
-    SD_R2_NO_ERROR = 0x00,
-    SD_R2_CARD_LOCKED = 0x01,
-    SD_R2_LOCKUNLOCK_ERROR = 0x02,
-    SD_R2_ERROR = 0x04,
-    SD_R2_CC_ERROR = 0x08,
-    SD_R2_CARD_ECC_FAILED = 0x10,
-    SD_R2_WP_VIOLATION = 0x20,
-    SD_R2_ERASE_PARAM = 0x40,
-    SD_R2_OUTOFRANGE = 0x80,
-
-    /**
-  * @brief  Data response error
-  */
-    SD_DATA_OK = (0x05),
-    SD_DATA_CRC_ERROR = (0x0B),
-    SD_DATA_WRITE_ERROR = (0x0D),
-    SD_DATA_OTHER_ERROR = (0xFF)
-} SD_Error;
-
-/**
-  * @}
-  */
-
-/* Private macro -------------------------------------------------------------*/
-
-/** @defgroup STM32_ADAFRUIT_SD_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/* Private variables ---------------------------------------------------------*/
-
-/** @defgroup STM32_ADAFRUIT_SD_Private_Variables
-  * @{
-  */
-__IO uint8_t SdStatus = SD_NOT_PRESENT;
-
-/* flag_SDHC :
-      0 :  Standard capacity
-      1 : High capacity
-*/
-uint16_t flag_SDHC = 0;
-
-/**
-  * @}
-  */
-
-/* Private function prototypes -----------------------------------------------*/
-static uint8_t SD_GetCIDRegister(SD_CID* Cid);
-static uint8_t SD_GetCSDRegister(SD_CSD* Csd);
-static uint8_t SD_GetDataResponse(void);
-static uint8_t SD_GoIdleState(void);
-static SD_CmdAnswer_typedef SD_SendCmd(uint8_t Cmd, uint32_t Arg, uint8_t Crc, uint8_t Answer);
-static uint8_t SD_WaitData(uint8_t data);
-static uint8_t SD_ReadData(void);
-/** @defgroup STM32_ADAFRUIT_SD_Private_Function_Prototypes
-  * @{
-  */
-/**
-  * @}
-  */
-
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup STM32_ADAFRUIT_SD_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Initializes the SD/SD communication.
-  * @param  None
-  * @retval The SD Response: 
-  *         - MSD_ERROR: Sequence failed
-  *         - MSD_OK: Sequence succeed
-  */
-uint8_t BSP_SD_Init(void) {
-    /* Init to maximum slow speed */
-    SD_SPI_Reconfigure_Slow();
-
-    /* Configure IO functionalities for SD pin */
-    SD_IO_Init();
-
-    /* SD detection pin is not physically mapped on the Adafruit shield */
-    SdStatus = SD_PRESENT;
-    uint8_t res = SD_GoIdleState();
-
-    /* Init to maximum fastest speed */
-    SD_SPI_Reconfigure_Fast();
-
-    /* SD initialized and set to SPI mode properly */
-    return res;
-}
-
-/**
-  * @brief  Returns information about specific card.
-  * @param  pCardInfo: Pointer to a SD_CardInfo structure that contains all SD 
-  *         card information.
-  * @retval The SD Response:
-  *         - MSD_ERROR: Sequence failed
-  *         - MSD_OK: Sequence succeed
-  */
-uint8_t BSP_SD_GetCardInfo(SD_CardInfo* pCardInfo) {
-    uint8_t status;
-
-    status = SD_GetCSDRegister(&(pCardInfo->Csd));
-    status |= SD_GetCIDRegister(&(pCardInfo->Cid));
-    if(flag_SDHC == 1) {
-        pCardInfo->LogBlockSize = 512;
-        pCardInfo->CardBlockSize = 512;
-        pCardInfo->CardCapacity =
-            ((uint64_t)pCardInfo->Csd.version.v2.DeviceSize + 1UL) * 1024UL * (uint64_t)pCardInfo->LogBlockSize;
-        pCardInfo->LogBlockNbr = (pCardInfo->CardCapacity) / (pCardInfo->LogBlockSize);
-    } else {
-        pCardInfo->CardCapacity = (pCardInfo->Csd.version.v1.DeviceSize + 1);
-        pCardInfo->CardCapacity *= (1 << (pCardInfo->Csd.version.v1.DeviceSizeMul + 2));
-        pCardInfo->LogBlockSize = 512;
-        pCardInfo->CardBlockSize = 1 << (pCardInfo->Csd.RdBlockLen);
-        pCardInfo->CardCapacity *= pCardInfo->CardBlockSize;
-        pCardInfo->LogBlockNbr = (pCardInfo->CardCapacity) / (pCardInfo->LogBlockSize);
-    }
-
-    return status;
-}
-
-/**
-  * @brief  Reads block(s) from a specified address in the SD card, in polling mode. 
-  * @param  pData: Pointer to the buffer that will contain the data to transmit
-  * @param  ReadAddr: Address from where data is to be read. The address is counted 
-  *                   in blocks of 512bytes
-  * @param  NumOfBlocks: Number of SD blocks to read
-  * @param  Timeout: This parameter is used for compatibility with BSP implementation
-  * @retval SD status
-  */
-uint8_t
-BSP_SD_ReadBlocks(uint32_t* pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout) {
-    uint32_t offset = 0;
-    uint8_t retr = BSP_SD_ERROR;
-    SD_CmdAnswer_typedef response;
-    uint16_t BlockSize = 512;
-
-    uint8_t* ptr = NULL;
-    //  uint8_t ptr[512];
-
-    /* Send CMD16 (SD_CMD_SET_BLOCKLEN) to set the size of the block and 
-     Check if the SD acknowledged the set block length command: R1 response (0x00: no errors) */
-    response = SD_SendCmd(SD_CMD_SET_BLOCKLEN, BlockSize, 0xFF, SD_ANSWER_R1_EXPECTED);
-    SD_IO_CSState(1);
-    SD_IO_WriteByte(SD_DUMMY_BYTE);
-    if(response.r1 != SD_R1_NO_ERROR) {
-        goto error;
-    }
-
-    ptr = malloc(sizeof(uint8_t) * BlockSize);
-    if(ptr == NULL) {
-        goto error;
-    }
-    memset(ptr, SD_DUMMY_BYTE, sizeof(uint8_t) * BlockSize);
-
-    /* Data transfer */
-    while(NumOfBlocks--) {
-        /* Send CMD17 (SD_CMD_READ_SINGLE_BLOCK) to read one block */
-        /* Check if the SD acknowledged the read block command: R1 response (0x00: no errors) */
-        response = SD_SendCmd(
-            SD_CMD_READ_SINGLE_BLOCK,
-            (ReadAddr + offset) * (flag_SDHC == 1 ? 1 : BlockSize),
-            0xFF,
-            SD_ANSWER_R1_EXPECTED);
-        if(response.r1 != SD_R1_NO_ERROR) {
-            goto error;
-        }
-
-        /* Now look for the data token to signify the start of the data */
-        if(SD_WaitData(SD_TOKEN_START_DATA_SINGLE_BLOCK_READ) == BSP_SD_OK) {
-            /* Read the SD block data : read NumByteToRead data */
-            SD_IO_WriteReadData(ptr, (uint8_t*)pData + offset, BlockSize);
-
-            /* Set next read address*/
-            offset += BlockSize;
-            /* get CRC bytes (not really needed by us, but required by SD) */
-            SD_IO_WriteByte(SD_DUMMY_BYTE);
-            SD_IO_WriteByte(SD_DUMMY_BYTE);
-        } else {
-            goto error;
-        }
-
-        /* End the command data read cycle */
-        SD_IO_CSState(1);
-        SD_IO_WriteByte(SD_DUMMY_BYTE);
-    }
-
-    retr = BSP_SD_OK;
-
-error:
-    /* Send dummy byte: 8 Clock pulses of delay */
-    SD_IO_CSState(1);
-    SD_IO_WriteByte(SD_DUMMY_BYTE);
-    if(ptr != NULL) free(ptr);
-
-    /* Return the reponse */
-    return retr;
-}
-
-/**
-  * @brief  Writes block(s) to a specified address in the SD card, in polling mode. 
-  * @param  pData: Pointer to the buffer that will contain the data to transmit
-  * @param  WriteAddr: Address from where data is to be written. The address is counted 
-  *                   in blocks of 512bytes
-  * @param  NumOfBlocks: Number of SD blocks to write
-  * @param  Timeout: This parameter is used for compatibility with BSP implementation
-  * @retval SD status
-  */
-uint8_t
-BSP_SD_WriteBlocks(uint32_t* pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout) {
-    uint32_t offset = 0;
-    uint8_t retr = BSP_SD_ERROR;
-    uint8_t* ptr = NULL;
-    SD_CmdAnswer_typedef response;
-    uint16_t BlockSize = 512;
-
-    /* Send CMD16 (SD_CMD_SET_BLOCKLEN) to set the size of the block and 
-     Check if the SD acknowledged the set block length command: R1 response (0x00: no errors) */
-    response = SD_SendCmd(SD_CMD_SET_BLOCKLEN, BlockSize, 0xFF, SD_ANSWER_R1_EXPECTED);
-    SD_IO_CSState(1);
-    SD_IO_WriteByte(SD_DUMMY_BYTE);
-    if(response.r1 != SD_R1_NO_ERROR) {
-        goto error;
-    }
-
-    ptr = malloc(sizeof(uint8_t) * BlockSize);
-    if(ptr == NULL) {
-        goto error;
-    }
-
-    /* Data transfer */
-    while(NumOfBlocks--) {
-        /* Send CMD24 (SD_CMD_WRITE_SINGLE_BLOCK) to write blocks  and
-       Check if the SD acknowledged the write block command: R1 response (0x00: no errors) */
-        response = SD_SendCmd(
-            SD_CMD_WRITE_SINGLE_BLOCK,
-            (WriteAddr + offset) * (flag_SDHC == 1 ? 1 : BlockSize),
-            0xFF,
-            SD_ANSWER_R1_EXPECTED);
-        if(response.r1 != SD_R1_NO_ERROR) {
-            goto error;
-        }
-
-        /* Send dummy byte for NWR timing : one byte between CMDWRITE and TOKEN */
-        SD_IO_WriteByte(SD_DUMMY_BYTE);
-        SD_IO_WriteByte(SD_DUMMY_BYTE);
-
-        /* Send the data token to signify the start of the data */
-        SD_IO_WriteByte(SD_TOKEN_START_DATA_SINGLE_BLOCK_WRITE);
-
-        /* Write the block data to SD */
-        SD_IO_WriteReadData((uint8_t*)pData + offset, ptr, BlockSize);
-
-        /* Set next write address */
-        offset += BlockSize;
-
-        /* Put CRC bytes (not really needed by us, but required by SD) */
-        SD_IO_WriteByte(SD_DUMMY_BYTE);
-        SD_IO_WriteByte(SD_DUMMY_BYTE);
-
-        /* Read data response */
-        if(SD_GetDataResponse() != SD_DATA_OK) {
-            /* Set response value to failure */
-            goto error;
-        }
-
-        SD_IO_CSState(1);
-        SD_IO_WriteByte(SD_DUMMY_BYTE);
-    }
-    retr = BSP_SD_OK;
-
-error:
-    if(ptr != NULL) free(ptr);
-    /* Send dummy byte: 8 Clock pulses of delay */
-    SD_IO_CSState(1);
-    SD_IO_WriteByte(SD_DUMMY_BYTE);
-
-    /* Return the reponse */
-    return retr;
-}
-
-/**
-  * @brief  Erases the specified memory area of the given SD card. 
-  * @param  StartAddr: Start address in Blocks (Size of a block is 512bytes)
-  * @param  EndAddr: End address in Blocks (Size of a block is 512bytes)
-  * @retval SD status
-  */
-uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr) {
-    uint8_t retr = BSP_SD_ERROR;
-    SD_CmdAnswer_typedef response;
-    uint16_t BlockSize = 512;
-
-    /* Send CMD32 (Erase group start) and check if the SD acknowledged the erase command: R1 response (0x00: no errors) */
-    response = SD_SendCmd(
-        SD_CMD_SD_ERASE_GRP_START,
-        (StartAddr) * (flag_SDHC == 1 ? 1 : BlockSize),
-        0xFF,
-        SD_ANSWER_R1_EXPECTED);
-    SD_IO_CSState(1);
-    SD_IO_WriteByte(SD_DUMMY_BYTE);
-    if(response.r1 == SD_R1_NO_ERROR) {
-        /* Send CMD33 (Erase group end) and Check if the SD acknowledged the erase command: R1 response (0x00: no errors) */
-        response = SD_SendCmd(
-            SD_CMD_SD_ERASE_GRP_END,
-            (EndAddr * 512) * (flag_SDHC == 1 ? 1 : BlockSize),
-            0xFF,
-            SD_ANSWER_R1_EXPECTED);
-        SD_IO_CSState(1);
-        SD_IO_WriteByte(SD_DUMMY_BYTE);
-        if(response.r1 == SD_R1_NO_ERROR) {
-            /* Send CMD38 (Erase) and Check if the SD acknowledged the erase command: R1 response (0x00: no errors) */
-            response = SD_SendCmd(SD_CMD_ERASE, 0, 0xFF, SD_ANSWER_R1B_EXPECTED);
-            if(response.r1 == SD_R1_NO_ERROR) {
-                retr = BSP_SD_OK;
-            }
-            SD_IO_CSState(1);
-            SD_IO_WriteByte(SD_DUMMY_BYTE);
-        }
-    }
-
-    /* Return the reponse */
-    return retr;
-}
-
-/**
-  * @brief  Returns the SD status.
-  * @param  None
-  * @retval The SD status.
-  */
-uint8_t BSP_SD_GetCardState(void) {
-    SD_CmdAnswer_typedef retr;
-
-    /* Send CMD13 (SD_SEND_STATUS) to get SD status */
-    retr = SD_SendCmd(SD_CMD_SEND_STATUS, 0, 0xFF, SD_ANSWER_R2_EXPECTED);
-    SD_IO_CSState(1);
-    SD_IO_WriteByte(SD_DUMMY_BYTE);
-
-    /* Find SD status according to card state */
-    if((retr.r1 == SD_R1_NO_ERROR) && (retr.r2 == SD_R2_NO_ERROR)) {
-        return BSP_SD_OK;
-    }
-
-    return BSP_SD_ERROR;
-}
-
-/**
-  * @brief  Reads the SD card SCD register.
-  *         Reading the contents of the CSD register in SPI mode is a simple 
-  *         read-block transaction.
-  * @param  Csd: pointer on an SCD register structure
-  * @retval SD status
-  */
-uint8_t SD_GetCSDRegister(SD_CSD* Csd) {
-    uint16_t counter = 0;
-    uint8_t CSD_Tab[16];
-    uint8_t retr = BSP_SD_ERROR;
-    SD_CmdAnswer_typedef response;
-
-    /* Send CMD9 (CSD register) or CMD10(CSD register) and Wait for response in the R1 format (0x00 is no errors) */
-    response = SD_SendCmd(SD_CMD_SEND_CSD, 0, 0xFF, SD_ANSWER_R1_EXPECTED);
-    if(response.r1 == SD_R1_NO_ERROR) {
-        if(SD_WaitData(SD_TOKEN_START_DATA_SINGLE_BLOCK_READ) == BSP_SD_OK) {
-            for(counter = 0; counter < 16; counter++) {
-                /* Store CSD register value on CSD_Tab */
-                CSD_Tab[counter] = SD_IO_WriteByte(SD_DUMMY_BYTE);
-            }
-
-            /* Get CRC bytes (not really needed by us, but required by SD) */
-            SD_IO_WriteByte(SD_DUMMY_BYTE);
-            SD_IO_WriteByte(SD_DUMMY_BYTE);
-
-            /*************************************************************************
-        CSD header decoding 
-      *************************************************************************/
-
-            /* Byte 0 */
-            Csd->CSDStruct = (CSD_Tab[0] & 0xC0) >> 6;
-            Csd->Reserved1 = CSD_Tab[0] & 0x3F;
-
-            /* Byte 1 */
-            Csd->TAAC = CSD_Tab[1];
-
-            /* Byte 2 */
-            Csd->NSAC = CSD_Tab[2];
-
-            /* Byte 3 */
-            Csd->MaxBusClkFrec = CSD_Tab[3];
-
-            /* Byte 4/5 */
-            Csd->CardComdClasses = (CSD_Tab[4] << 4) | ((CSD_Tab[5] & 0xF0) >> 4);
-            Csd->RdBlockLen = CSD_Tab[5] & 0x0F;
-
-            /* Byte 6 */
-            Csd->PartBlockRead = (CSD_Tab[6] & 0x80) >> 7;
-            Csd->WrBlockMisalign = (CSD_Tab[6] & 0x40) >> 6;
-            Csd->RdBlockMisalign = (CSD_Tab[6] & 0x20) >> 5;
-            Csd->DSRImpl = (CSD_Tab[6] & 0x10) >> 4;
-
-            /*************************************************************************
-        CSD v1/v2 decoding  
-      *************************************************************************/
-
-            if(flag_SDHC == 0) {
-                Csd->version.v1.Reserved1 = ((CSD_Tab[6] & 0x0C) >> 2);
-
-                Csd->version.v1.DeviceSize = ((CSD_Tab[6] & 0x03) << 10) | (CSD_Tab[7] << 2) |
-                                             ((CSD_Tab[8] & 0xC0) >> 6);
-                Csd->version.v1.MaxRdCurrentVDDMin = (CSD_Tab[8] & 0x38) >> 3;
-                Csd->version.v1.MaxRdCurrentVDDMax = (CSD_Tab[8] & 0x07);
-                Csd->version.v1.MaxWrCurrentVDDMin = (CSD_Tab[9] & 0xE0) >> 5;
-                Csd->version.v1.MaxWrCurrentVDDMax = (CSD_Tab[9] & 0x1C) >> 2;
-                Csd->version.v1.DeviceSizeMul = ((CSD_Tab[9] & 0x03) << 1) |
-                                                ((CSD_Tab[10] & 0x80) >> 7);
-            } else {
-                Csd->version.v2.Reserved1 = ((CSD_Tab[6] & 0x0F) << 2) |
-                                            ((CSD_Tab[7] & 0xC0) >> 6);
-                Csd->version.v2.DeviceSize = ((CSD_Tab[7] & 0x3F) << 16) | (CSD_Tab[8] << 8) |
-                                             CSD_Tab[9];
-                Csd->version.v2.Reserved2 = ((CSD_Tab[10] & 0x80) >> 8);
-            }
-
-            Csd->EraseSingleBlockEnable = (CSD_Tab[10] & 0x40) >> 6;
-            Csd->EraseSectorSize = ((CSD_Tab[10] & 0x3F) << 1) | ((CSD_Tab[11] & 0x80) >> 7);
-            Csd->WrProtectGrSize = (CSD_Tab[11] & 0x7F);
-            Csd->WrProtectGrEnable = (CSD_Tab[12] & 0x80) >> 7;
-            Csd->Reserved2 = (CSD_Tab[12] & 0x60) >> 5;
-            Csd->WrSpeedFact = (CSD_Tab[12] & 0x1C) >> 2;
-            Csd->MaxWrBlockLen = ((CSD_Tab[12] & 0x03) << 2) | ((CSD_Tab[13] & 0xC0) >> 6);
-            Csd->WriteBlockPartial = (CSD_Tab[13] & 0x20) >> 5;
-            Csd->Reserved3 = (CSD_Tab[13] & 0x1F);
-            Csd->FileFormatGrouop = (CSD_Tab[14] & 0x80) >> 7;
-            Csd->CopyFlag = (CSD_Tab[14] & 0x40) >> 6;
-            Csd->PermWrProtect = (CSD_Tab[14] & 0x20) >> 5;
-            Csd->TempWrProtect = (CSD_Tab[14] & 0x10) >> 4;
-            Csd->FileFormat = (CSD_Tab[14] & 0x0C) >> 2;
-            Csd->Reserved4 = (CSD_Tab[14] & 0x03);
-            Csd->crc = (CSD_Tab[15] & 0xFE) >> 1;
-            Csd->Reserved5 = (CSD_Tab[15] & 0x01);
-
-            retr = BSP_SD_OK;
-        }
-    }
-
-    /* Send dummy byte: 8 Clock pulses of delay */
-    SD_IO_CSState(1);
-    SD_IO_WriteByte(SD_DUMMY_BYTE);
-
-    /* Return the reponse */
-    return retr;
-}
-
-/**
-  * @brief  Reads the SD card CID register.
-  *         Reading the contents of the CID register in SPI mode is a simple 
-  *         read-block transaction.
-  * @param  Cid: pointer on an CID register structure
-  * @retval SD status
-  */
-uint8_t SD_GetCIDRegister(SD_CID* Cid) {
-    uint32_t counter = 0;
-    uint8_t retr = BSP_SD_ERROR;
-    uint8_t CID_Tab[16];
-    SD_CmdAnswer_typedef response;
-
-    /* Send CMD10 (CID register) and Wait for response in the R1 format (0x00 is no errors) */
-    response = SD_SendCmd(SD_CMD_SEND_CID, 0, 0xFF, SD_ANSWER_R1_EXPECTED);
-    if(response.r1 == SD_R1_NO_ERROR) {
-        if(SD_WaitData(SD_TOKEN_START_DATA_SINGLE_BLOCK_READ) == BSP_SD_OK) {
-            /* Store CID register value on CID_Tab */
-            for(counter = 0; counter < 16; counter++) {
-                CID_Tab[counter] = SD_IO_WriteByte(SD_DUMMY_BYTE);
-            }
-
-            /* Get CRC bytes (not really needed by us, but required by SD) */
-            SD_IO_WriteByte(SD_DUMMY_BYTE);
-            SD_IO_WriteByte(SD_DUMMY_BYTE);
-
-            /* Byte 0 */
-            Cid->ManufacturerID = CID_Tab[0];
-
-            /* Byte 1 */
-            Cid->OEM_AppliID = CID_Tab[1] << 8;
-
-            /* Byte 2 */
-            Cid->OEM_AppliID |= CID_Tab[2];
-
-            /* Byte 3 */
-            Cid->ProdName1 = CID_Tab[3] << 24;
-
-            /* Byte 4 */
-            Cid->ProdName1 |= CID_Tab[4] << 16;
-
-            /* Byte 5 */
-            Cid->ProdName1 |= CID_Tab[5] << 8;
-
-            /* Byte 6 */
-            Cid->ProdName1 |= CID_Tab[6];
-
-            /* Byte 7 */
-            Cid->ProdName2 = CID_Tab[7];
-
-            /* Byte 8 */
-            Cid->ProdRev = CID_Tab[8];
-
-            /* Byte 9 */
-            Cid->ProdSN = CID_Tab[9] << 24;
-
-            /* Byte 10 */
-            Cid->ProdSN |= CID_Tab[10] << 16;
-
-            /* Byte 11 */
-            Cid->ProdSN |= CID_Tab[11] << 8;
-
-            /* Byte 12 */
-            Cid->ProdSN |= CID_Tab[12];
-
-            /* Byte 13 */
-            Cid->Reserved1 |= (CID_Tab[13] & 0xF0) >> 4;
-            Cid->ManufactDate = (CID_Tab[13] & 0x0F) << 8;
-
-            /* Byte 14 */
-            Cid->ManufactDate |= CID_Tab[14];
-
-            /* Byte 15 */
-            Cid->CID_CRC = (CID_Tab[15] & 0xFE) >> 1;
-            Cid->Reserved2 = 1;
-
-            retr = BSP_SD_OK;
-        }
-    }
-
-    /* Send dummy byte: 8 Clock pulses of delay */
-    SD_IO_CSState(1);
-    SD_IO_WriteByte(SD_DUMMY_BYTE);
-
-    /* Return the reponse */
-    return retr;
-}
-
-/**
-  * @brief  Sends 5 bytes command to the SD card and get response
-  * @param  Cmd: The user expected command to send to SD card.
-  * @param  Arg: The command argument.
-  * @param  Crc: The CRC.
-  * @param  Answer: SD_ANSWER_NOT_EXPECTED or SD_ANSWER_EXPECTED
-  * @retval SD status
-  */
-SD_CmdAnswer_typedef SD_SendCmd(uint8_t Cmd, uint32_t Arg, uint8_t Crc, uint8_t Answer) {
-    uint8_t frame[SD_CMD_LENGTH], frameout[SD_CMD_LENGTH];
-    SD_CmdAnswer_typedef retr = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
-
-    /* R1 Lenght = NCS(0)+ 6 Bytes command + NCR(min1 max8) + 1 Bytes answer + NEC(0) = 15bytes */
-    /* R1b identical to R1 + Busy information                                                   */
-    /* R2 Lenght = NCS(0)+ 6 Bytes command + NCR(min1 max8) + 2 Bytes answer + NEC(0) = 16bytes */
-
-    /* Prepare Frame to send */
-    frame[0] = (Cmd | 0x40); /* Construct byte 1 */
-    frame[1] = (uint8_t)(Arg >> 24); /* Construct byte 2 */
-    frame[2] = (uint8_t)(Arg >> 16); /* Construct byte 3 */
-    frame[3] = (uint8_t)(Arg >> 8); /* Construct byte 4 */
-    frame[4] = (uint8_t)(Arg); /* Construct byte 5 */
-    frame[5] = (Crc | 0x01); /* Construct byte 6 */
-
-    /* Send the command */
-    SD_IO_CSState(0);
-    SD_IO_WriteReadData(frame, frameout, SD_CMD_LENGTH); /* Send the Cmd bytes */
-
-    switch(Answer) {
-    case SD_ANSWER_R1_EXPECTED:
-        retr.r1 = SD_ReadData();
-        break;
-    case SD_ANSWER_R1B_EXPECTED:
-        retr.r1 = SD_ReadData();
-        retr.r2 = SD_IO_WriteByte(SD_DUMMY_BYTE);
-        /* Set CS High */
-        SD_IO_CSState(1);
-        HAL_Delay(1);
-        /* Set CS Low */
-        SD_IO_CSState(0);
-
-        /* Wait IO line return 0xFF */
-        while(SD_IO_WriteByte(SD_DUMMY_BYTE) != 0xFF)
-            ;
-        break;
-    case SD_ANSWER_R2_EXPECTED:
-        retr.r1 = SD_ReadData();
-        retr.r2 = SD_IO_WriteByte(SD_DUMMY_BYTE);
-        break;
-    case SD_ANSWER_R3_EXPECTED:
-    case SD_ANSWER_R7_EXPECTED:
-        retr.r1 = SD_ReadData();
-        retr.r2 = SD_IO_WriteByte(SD_DUMMY_BYTE);
-        retr.r3 = SD_IO_WriteByte(SD_DUMMY_BYTE);
-        retr.r4 = SD_IO_WriteByte(SD_DUMMY_BYTE);
-        retr.r5 = SD_IO_WriteByte(SD_DUMMY_BYTE);
-        break;
-    default:
-        break;
-    }
-    return retr;
-}
-
-/**
-  * @brief  Gets the SD card data response and check the busy flag.
-  * @param  None
-  * @retval The SD status: Read data response xxx0<status>1
-  *         - status 010: Data accecpted
-  *         - status 101: Data rejected due to a crc error
-  *         - status 110: Data rejected due to a Write error.
-  *         - status 111: Data rejected due to other error.
-  */
-uint8_t SD_GetDataResponse(void) {
-    uint8_t dataresponse;
-    uint8_t rvalue = SD_DATA_OTHER_ERROR;
-
-    dataresponse = SD_IO_WriteByte(SD_DUMMY_BYTE);
-    SD_IO_WriteByte(SD_DUMMY_BYTE); /* read the busy response byte*/
-
-    /* Mask unused bits */
-    switch(dataresponse & 0x1F) {
-    case SD_DATA_OK:
-        rvalue = SD_DATA_OK;
-
-        /* Set CS High */
-        SD_IO_CSState(1);
-        /* Set CS Low */
-        SD_IO_CSState(0);
-
-        /* Wait IO line return 0xFF */
-        while(SD_IO_WriteByte(SD_DUMMY_BYTE) != 0xFF)
-            ;
-        break;
-    case SD_DATA_CRC_ERROR:
-        rvalue = SD_DATA_CRC_ERROR;
-        break;
-    case SD_DATA_WRITE_ERROR:
-        rvalue = SD_DATA_WRITE_ERROR;
-        break;
-    default:
-        break;
-    }
-
-    /* Return response */
-    return rvalue;
-}
-
-/**
-  * @brief  Put the SD in Idle state.
-  * @param  None
-  * @retval SD status
-  */
-uint8_t SD_GoIdleState(void) {
-    SD_CmdAnswer_typedef response;
-    __IO uint8_t counter = 0;
-    /* Send CMD0 (SD_CMD_GO_IDLE_STATE) to put SD in SPI mode and 
-     wait for In Idle State Response (R1 Format) equal to 0x01 */
-    do {
-        counter++;
-        response = SD_SendCmd(SD_CMD_GO_IDLE_STATE, 0, 0x95, SD_ANSWER_R1_EXPECTED);
-        SD_IO_CSState(1);
-        SD_IO_WriteByte(SD_DUMMY_BYTE);
-        if(counter >= SD_MAX_TRY) {
-            return BSP_SD_ERROR;
-        }
-    } while(response.r1 != SD_R1_IN_IDLE_STATE);
-
-    /* Send CMD8 (SD_CMD_SEND_IF_COND) to check the power supply status 
-     and wait until response (R7 Format) equal to 0xAA and */
-    response = SD_SendCmd(SD_CMD_SEND_IF_COND, 0x1AA, 0x87, SD_ANSWER_R7_EXPECTED);
-    SD_IO_CSState(1);
-    SD_IO_WriteByte(SD_DUMMY_BYTE);
-    if((response.r1 & SD_R1_ILLEGAL_COMMAND) == SD_R1_ILLEGAL_COMMAND) {
-        /* initialise card V1 */
-        do {
-            /* initialise card V1 */
-            /* Send CMD55 (SD_CMD_APP_CMD) before any ACMD command: R1 response (0x00: no errors) */
-            response = SD_SendCmd(SD_CMD_APP_CMD, 0x00000000, 0xFF, SD_ANSWER_R1_EXPECTED);
-            SD_IO_CSState(1);
-            SD_IO_WriteByte(SD_DUMMY_BYTE);
-
-            /* Send ACMD41 (SD_CMD_SD_APP_OP_COND) to initialize SDHC or SDXC cards: R1 response (0x00: no errors) */
-            response = SD_SendCmd(SD_CMD_SD_APP_OP_COND, 0x00000000, 0xFF, SD_ANSWER_R1_EXPECTED);
-            SD_IO_CSState(1);
-            SD_IO_WriteByte(SD_DUMMY_BYTE);
-        } while(response.r1 == SD_R1_IN_IDLE_STATE);
-        flag_SDHC = 0;
-    } else if(response.r1 == SD_R1_IN_IDLE_STATE) {
-        /* initialise card V2 */
-        do {
-            /* Send CMD55 (SD_CMD_APP_CMD) before any ACMD command: R1 response (0x00: no errors) */
-            response = SD_SendCmd(SD_CMD_APP_CMD, 0, 0xFF, SD_ANSWER_R1_EXPECTED);
-            SD_IO_CSState(1);
-            SD_IO_WriteByte(SD_DUMMY_BYTE);
-
-            /* Send ACMD41 (SD_CMD_SD_APP_OP_COND) to initialize SDHC or SDXC cards: R1 response (0x00: no errors) */
-            response = SD_SendCmd(SD_CMD_SD_APP_OP_COND, 0x40000000, 0xFF, SD_ANSWER_R1_EXPECTED);
-            SD_IO_CSState(1);
-            SD_IO_WriteByte(SD_DUMMY_BYTE);
-        } while(response.r1 == SD_R1_IN_IDLE_STATE);
-
-        if((response.r1 & SD_R1_ILLEGAL_COMMAND) == SD_R1_ILLEGAL_COMMAND) {
-            do {
-                /* Send CMD55 (SD_CMD_APP_CMD) before any ACMD command: R1 response (0x00: no errors) */
-                response = SD_SendCmd(SD_CMD_APP_CMD, 0, 0xFF, SD_ANSWER_R1_EXPECTED);
-                SD_IO_CSState(1);
-                SD_IO_WriteByte(SD_DUMMY_BYTE);
-                if(response.r1 != SD_R1_IN_IDLE_STATE) {
-                    return BSP_SD_ERROR;
-                }
-                /* Send ACMD41 (SD_CMD_SD_APP_OP_COND) to initialize SDHC or SDXC cards: R1 response (0x00: no errors) */
-                response =
-                    SD_SendCmd(SD_CMD_SD_APP_OP_COND, 0x00000000, 0xFF, SD_ANSWER_R1_EXPECTED);
-                SD_IO_CSState(1);
-                SD_IO_WriteByte(SD_DUMMY_BYTE);
-            } while(response.r1 == SD_R1_IN_IDLE_STATE);
-        }
-
-        /* Send CMD58 (SD_CMD_READ_OCR) to initialize SDHC or SDXC cards: R3 response (0x00: no errors) */
-        response = SD_SendCmd(SD_CMD_READ_OCR, 0x00000000, 0xFF, SD_ANSWER_R3_EXPECTED);
-        SD_IO_CSState(1);
-        SD_IO_WriteByte(SD_DUMMY_BYTE);
-        if(response.r1 != SD_R1_NO_ERROR) {
-            return BSP_SD_ERROR;
-        }
-        flag_SDHC = (response.r2 & 0x40) >> 6;
-    } else {
-        return BSP_SD_ERROR;
-    }
-
-    return BSP_SD_OK;
-}
-
-/**
-  * @brief  Waits a data until a value different from SD_DUMMY_BITE
-  * @param  None
-  * @retval the value read
-  */
-uint8_t SD_ReadData(void) {
-    uint8_t timeout = 0x08;
-    uint8_t readvalue;
-
-    /* Check if response is got or a timeout is happen */
-    do {
-        readvalue = SD_IO_WriteByte(SD_DUMMY_BYTE);
-        timeout--;
-
-    } while((readvalue == SD_DUMMY_BYTE) && timeout);
-
-    /* Right response got */
-    return readvalue;
-}
-
-/**
-  * @brief  Waits a data from the SD card
-  * @param  data : Expected data from the SD card
-  * @retval BSP_SD_OK or BSP_SD_TIMEOUT
-  */
-uint8_t SD_WaitData(uint8_t data) {
-    uint16_t timeout = 0xFFFF;
-    uint8_t readvalue;
-
-    /* Check if response is got or a timeout is happen */
-
-    do {
-        readvalue = SD_IO_WriteByte(SD_DUMMY_BYTE);
-        timeout--;
-    } while((readvalue != data) && timeout);
-
-    if(timeout == 0) {
-        /* After time out */
-        return BSP_SD_TIMEOUT;
-    }
-
-    /* Right response got */
-    return BSP_SD_OK;
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Src/fatfs/stm32_adafruit_sd.h

@@ -1,251 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32_adafruit_sd.h
-  * @author  MCD Application Team
-  * @version V3.0.0
-  * @date    23-December-2016
-  * @brief   This file contains the common defines and functions prototypes for
-  *          the stm32_adafruit_sd.c driver.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32_ADAFRUIT_SD_H
-#define __STM32_ADAFRUIT_SD_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-
-/* Includes ------------------------------------------------------------------*/
-#include <stdint.h>
-
-/** @addtogroup BSP
-  * @{
-  */ 
-#define __IO    volatile   
-   
-/** @addtogroup STM32_ADAFRUIT
-  * @{
-  */
-    
-/** @defgroup STM32_ADAFRUIT_SD
-  * @{
-  */    
-
-/** @defgroup STM32_ADAFRUIT_SD_Exported_Types
-  * @{
-  */
-   
-/** 
-  * @brief  SD status structure definition  
-  */     
-enum {    
-      BSP_SD_OK = 0x00,      
-      MSD_OK = 0x00,
-      BSP_SD_ERROR = 0x01,
-      BSP_SD_TIMEOUT
-};
-   
-typedef struct              
-{
-  uint8_t  Reserved1:2;               /* Reserved */
-  uint16_t DeviceSize:12;             /* Device Size */
-  uint8_t  MaxRdCurrentVDDMin:3;      /* Max. read current @ VDD min */
-  uint8_t  MaxRdCurrentVDDMax:3;      /* Max. read current @ VDD max */
-  uint8_t  MaxWrCurrentVDDMin:3;      /* Max. write current @ VDD min */
-  uint8_t  MaxWrCurrentVDDMax:3;      /* Max. write current @ VDD max */
-  uint8_t  DeviceSizeMul:3;           /* Device size multiplier */
-} struct_v1;
-
-
-typedef struct              
-{
-  uint8_t  Reserved1:6;               /* Reserved */
-  uint32_t DeviceSize:22;             /* Device Size */
-  uint8_t  Reserved2:1;               /* Reserved */
-} struct_v2;
-
-/** 
-  * @brief  Card Specific Data: CSD Register
-  */ 
-typedef struct
-{
-  /* Header part */
-  uint8_t  CSDStruct:2;            /* CSD structure */
-  uint8_t  Reserved1:6;            /* Reserved */
-  uint8_t  TAAC:8;                 /* Data read access-time 1 */
-  uint8_t  NSAC:8;                 /* Data read access-time 2 in CLK cycles */
-  uint8_t  MaxBusClkFrec:8;        /* Max. bus clock frequency */
-  uint16_t CardComdClasses:12;      /* Card command classes */
-  uint8_t  RdBlockLen:4;           /* Max. read data block length */
-  uint8_t  PartBlockRead:1;        /* Partial blocks for read allowed */
-  uint8_t  WrBlockMisalign:1;      /* Write block misalignment */
-  uint8_t  RdBlockMisalign:1;      /* Read block misalignment */
-  uint8_t  DSRImpl:1;              /* DSR implemented */
-  
-  /* v1 or v2 struct */
-  union csd_version {
-    struct_v1 v1;
-    struct_v2 v2;
-  } version;
-  
-  uint8_t  EraseSingleBlockEnable:1;  /* Erase single block enable */
-  uint8_t  EraseSectorSize:7;         /* Erase group size multiplier */
-  uint8_t  WrProtectGrSize:7;         /* Write protect group size */
-  uint8_t  WrProtectGrEnable:1;       /* Write protect group enable */
-  uint8_t  Reserved2:2;               /* Reserved */
-  uint8_t  WrSpeedFact:3;             /* Write speed factor */
-  uint8_t  MaxWrBlockLen:4;           /* Max. write data block length */
-  uint8_t  WriteBlockPartial:1;       /* Partial blocks for write allowed */
-  uint8_t  Reserved3:5;               /* Reserved */
-  uint8_t  FileFormatGrouop:1;        /* File format group */
-  uint8_t  CopyFlag:1;                /* Copy flag (OTP) */
-  uint8_t  PermWrProtect:1;           /* Permanent write protection */
-  uint8_t  TempWrProtect:1;           /* Temporary write protection */
-  uint8_t  FileFormat:2;              /* File Format */
-  uint8_t  Reserved4:2;               /* Reserved */
-  uint8_t  crc:7;                     /* Reserved */
-  uint8_t  Reserved5:1;               /* always 1*/
-  
-} SD_CSD;
-
-/** 
-  * @brief  Card Identification Data: CID Register   
-  */
-typedef struct
-{
-  __IO uint8_t  ManufacturerID;       /* ManufacturerID */
-  __IO uint16_t OEM_AppliID;          /* OEM/Application ID */
-  __IO uint32_t ProdName1;            /* Product Name part1 */
-  __IO uint8_t  ProdName2;            /* Product Name part2*/
-  __IO uint8_t  ProdRev;              /* Product Revision */
-  __IO uint32_t ProdSN;               /* Product Serial Number */
-  __IO uint8_t  Reserved1;            /* Reserved1 */
-  __IO uint16_t ManufactDate;         /* Manufacturing Date */
-  __IO uint8_t  CID_CRC;              /* CID CRC */
-  __IO uint8_t  Reserved2;            /* always 1 */
-} SD_CID;
-
-/** 
-  * @brief SD Card information 
-  */
-typedef struct
-{
-  SD_CSD Csd;
-  SD_CID Cid;
-  uint64_t CardCapacity;              /*!< Card Capacity */
-  uint32_t CardBlockSize;             /*!< Card Block Size */
-  uint32_t LogBlockNbr;               /*!< Specifies the Card logical Capacity in blocks   */
-  uint32_t LogBlockSize;              /*!< Specifies logical block size in bytes           */
-} SD_CardInfo;
-
-/**
-  * @}
-  */
-  
-/** @defgroup STM32_ADAFRUIT_SPI_SD_Exported_Constants
-  * @{
-  */ 
-  
-/**
-  * @brief  Block Size
-  */
-#define SD_BLOCK_SIZE    0x200
-
-/**
-  * @brief  SD detection on its memory slot
-  */
-#define SD_PRESENT               ((uint8_t)0x01)
-#define SD_NOT_PRESENT           ((uint8_t)0x00)
-
-#define SD_DATATIMEOUT           ((uint32_t)100000000)
-
-/** 
-  * @brief SD Card information structure 
-  */   
-#define BSP_SD_CardInfo SD_CardInfo
-
-/**
-  * @}
-  */
-  
-/** @defgroup STM32_ADAFRUIT_SD_Exported_Macro
-  * @{
-  */ 
-
-/**
-  * @}
-  */ 
-
-/** @defgroup STM32_ADAFRUIT_SD_Exported_Functions
-  * @{
-  */   
-uint8_t BSP_SD_Init(void);
-uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout);
-uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout);
-uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr);
-uint8_t BSP_SD_GetCardState(void);
-uint8_t BSP_SD_GetCardInfo(SD_CardInfo *pCardInfo);
-   
-/* Link functions for SD Card peripheral*/
-void    SD_SPI_Slow_Init(void);
-void    SD_SPI_Fast_Init(void);
-void    SD_IO_Init(void);
-void    SD_IO_CSState(uint8_t state);
-void    SD_IO_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength);
-uint8_t SD_IO_WriteByte(uint8_t Data);
-
-/* Link function for HAL delay */
-void HAL_Delay(__IO uint32_t Delay);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32_ADAFRUIT_SD_H */
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Src/fatfs/syscall.c

@@ -1,138 +0,0 @@
-/*------------------------------------------------------------------------*/
-/* Sample code of OS dependent controls for FatFs                         */
-/* (C)ChaN, 2014                                                          */
-/*   Portions COPYRIGHT 2017 STMicroelectronics                           */
-/*   Portions Copyright (C) 2014, ChaN, all right reserved                */
-/*------------------------------------------------------------------------*/
-
-/**
-  ******************************************************************************
-  * @attention
-  *
-  * Copyright (c) 2017 STMicroelectronics. All rights reserved.
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                       opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-**/
-
-
-
-#include "fatfs/ff.h"
-
-
-#if _FS_REENTRANT
-/*------------------------------------------------------------------------*/
-/* Create a Synchronization Object                                        */
-/*------------------------------------------------------------------------*/
-/* This function is called in f_mount() function to create a new
-/  synchronization object, such as semaphore and mutex. When a 0 is returned,
-/  the f_mount() function fails with FR_INT_ERR.
-*/
-
-int ff_cre_syncobj (	/* 1:Function succeeded, 0:Could not create the sync object */
-	BYTE vol,			/* Corresponding volume (logical drive number) */
-	_SYNC_t *sobj		/* Pointer to return the created sync object */
-)
-{
-
-    int ret;
-
-    //osSemaphoreDef(SEM);
-    //*sobj = osSemaphoreCreate(osSemaphore(SEM), 1);
-    *sobj = osMutexNew(NULL);
-    ret = (*sobj != NULL);
-
-    return ret;
-}
-
-
-
-/*------------------------------------------------------------------------*/
-/* Delete a Synchronization Object                                        */
-/*------------------------------------------------------------------------*/
-/* This function is called in f_mount() function to delete a synchronization
-/  object that created with ff_cre_syncobj() function. When a 0 is returned,
-/  the f_mount() function fails with FR_INT_ERR.
-*/
-
-int ff_del_syncobj (	/* 1:Function succeeded, 0:Could not delete due to any error */
-	_SYNC_t sobj		/* Sync object tied to the logical drive to be deleted */
-)
-{
-    osMutexDelete(sobj);
-    return 1;
-}
-
-
-
-/*------------------------------------------------------------------------*/
-/* Request Grant to Access the Volume                                     */
-/*------------------------------------------------------------------------*/
-/* This function is called on entering file functions to lock the volume.
-/  When a 0 is returned, the file function fails with FR_TIMEOUT.
-*/
-
-int ff_req_grant (	/* 1:Got a grant to access the volume, 0:Could not get a grant */
-	_SYNC_t sobj	/* Sync object to wait */
-)
-{
-  int ret = 0;
-
-  if(osMutexAcquire(sobj, _FS_TIMEOUT) == osOK) {
-      ret = 1;
-  }
-
-  return ret;
-}
-
-
-
-/*------------------------------------------------------------------------*/
-/* Release Grant to Access the Volume                                     */
-/*------------------------------------------------------------------------*/
-/* This function is called on leaving file functions to unlock the volume.
-*/
-
-void ff_rel_grant (
-	_SYNC_t sobj	/* Sync object to be signaled */
-)
-{
-    osMutexRelease(sobj);
-}
-
-#endif
-
-
-
-
-#if _USE_LFN == 3	/* LFN with a working buffer on the heap */
-/*------------------------------------------------------------------------*/
-/* Allocate a memory block                                                */
-/*------------------------------------------------------------------------*/
-/* If a NULL is returned, the file function fails with FR_NOT_ENOUGH_CORE.
-*/
-
-void* ff_memalloc (	/* Returns pointer to the allocated memory block */
-	UINT msize		/* Number of bytes to allocate */
-)
-{
-	return ff_malloc(msize);	/* Allocate a new memory block with POSIX API */
-}
-
-
-/*------------------------------------------------------------------------*/
-/* Free a memory block                                                    */
-/*------------------------------------------------------------------------*/
-
-void ff_memfree (
-	void* mblock	/* Pointer to the memory block to free */
-)
-{
-	ff_free(mblock);	/* Discard the memory block with POSIX API */
-}
-
-#endif

firmware/targets/f3/Src/fatfs/user_diskio.c

@@ -1,219 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
- ******************************************************************************
- * @file    user_diskio.c
- * @brief   This file includes a diskio driver skeleton to be completed by the user.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under Ultimate Liberty license
- * SLA0044, the "License"; You may not use this file except in compliance with
- * the License. You may obtain a copy of the License at:
- *                             www.st.com/SLA0044
- *
- ******************************************************************************
- */
-/* USER CODE END Header */
-
-#ifdef USE_OBSOLETE_USER_CODE_SECTION_0
-/* 
- * Warning: the user section 0 is no more in use (starting from CubeMx version 4.16.0)
- * To be suppressed in the future. 
- * Kept to ensure backward compatibility with previous CubeMx versions when 
- * migrating projects. 
- * User code previously added there should be copied in the new user sections before 
- * the section contents can be deleted.
- */
-/* USER CODE BEGIN 0 */
-/* USER CODE END 0 */
-#endif
-
-/* USER CODE BEGIN DECL */
-
-/* Includes ------------------------------------------------------------------*/
-#include "user_diskio.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/* Private variables ---------------------------------------------------------*/
-/* Disk status */
-static volatile DSTATUS Stat = STA_NOINIT;
-
-static DSTATUS User_CheckStatus(BYTE lun) {
-    Stat = STA_NOINIT;
-
-    if(BSP_SD_GetCardState() == MSD_OK) {
-        Stat &= ~STA_NOINIT;
-    }
-
-    return Stat;
-}
-/* USER CODE END DECL */
-
-/* Private function prototypes -----------------------------------------------*/
-DSTATUS USER_initialize(BYTE pdrv);
-DSTATUS USER_status(BYTE pdrv);
-DRESULT USER_read(BYTE pdrv, BYTE* buff, DWORD sector, UINT count);
-#if _USE_WRITE == 1
-DRESULT USER_write(BYTE pdrv, const BYTE* buff, DWORD sector, UINT count);
-#endif /* _USE_WRITE == 1 */
-#if _USE_IOCTL == 1
-DRESULT USER_ioctl(BYTE pdrv, BYTE cmd, void* buff);
-#endif /* _USE_IOCTL == 1 */
-
-Diskio_drvTypeDef USER_Driver = {
-    USER_initialize,
-    USER_status,
-    USER_read,
-#if _USE_WRITE
-    USER_write,
-#endif /* _USE_WRITE == 1 */
-#if _USE_IOCTL == 1
-    USER_ioctl,
-#endif /* _USE_IOCTL == 1 */
-};
-
-/* Private functions ---------------------------------------------------------*/
-
-/**
-  * @brief  Initializes a Drive
-  * @param  pdrv: Physical drive number (0..)
-  * @retval DSTATUS: Operation status
-  */
-DSTATUS USER_initialize(BYTE pdrv /* Physical drive nmuber to identify the drive */
-) {
-    /* USER CODE BEGIN INIT */
-    return User_CheckStatus(pdrv);
-    /* USER CODE END INIT */
-}
-
-/**
-  * @brief  Gets Disk Status 
-  * @param  pdrv: Physical drive number (0..)
-  * @retval DSTATUS: Operation status
-  */
-DSTATUS USER_status(BYTE pdrv /* Physical drive number to identify the drive */
-) {
-    /* USER CODE BEGIN STATUS */
-    return Stat;
-    /* USER CODE END STATUS */
-}
-
-/**
-  * @brief  Reads Sector(s) 
-  * @param  pdrv: Physical drive number (0..)
-  * @param  *buff: Data buffer to store read data
-  * @param  sector: Sector address (LBA)
-  * @param  count: Number of sectors to read (1..128)
-  * @retval DRESULT: Operation result
-  */
-DRESULT USER_read(
-    BYTE pdrv, /* Physical drive nmuber to identify the drive */
-    BYTE* buff, /* Data buffer to store read data */
-    DWORD sector, /* Sector address in LBA */
-    UINT count /* Number of sectors to read */
-) {
-    /* USER CODE BEGIN READ */
-    DRESULT res = RES_ERROR;
-    if(BSP_SD_ReadBlocks((uint32_t*)buff, (uint32_t)(sector), count, SD_DATATIMEOUT) == MSD_OK) {
-        /* wait until the read operation is finished */
-        while(BSP_SD_GetCardState() != MSD_OK) {
-        }
-        res = RES_OK;
-    }
-
-    return res;
-    /* USER CODE END READ */
-}
-
-/**
-  * @brief  Writes Sector(s)  
-  * @param  pdrv: Physical drive number (0..)
-  * @param  *buff: Data to be written
-  * @param  sector: Sector address (LBA)
-  * @param  count: Number of sectors to write (1..128)
-  * @retval DRESULT: Operation result
-  */
-#if _USE_WRITE == 1
-DRESULT USER_write(
-    BYTE pdrv, /* Physical drive nmuber to identify the drive */
-    const BYTE* buff, /* Data to be written */
-    DWORD sector, /* Sector address in LBA */
-    UINT count /* Number of sectors to write */
-) {
-    /* USER CODE BEGIN WRITE */
-    /* USER CODE HERE */
-    DRESULT res = RES_ERROR;
-
-    if(BSP_SD_WriteBlocks((uint32_t*)buff, (uint32_t)(sector), count, SD_DATATIMEOUT) == MSD_OK) {
-        /* wait until the Write operation is finished */
-        while(BSP_SD_GetCardState() != MSD_OK) {
-        }
-        res = RES_OK;
-    }
-
-    return res;
-    /* USER CODE END WRITE */
-}
-#endif /* _USE_WRITE == 1 */
-
-/**
-  * @brief  I/O control operation  
-  * @param  pdrv: Physical drive number (0..)
-  * @param  cmd: Control code
-  * @param  *buff: Buffer to send/receive control data
-  * @retval DRESULT: Operation result
-  */
-#if _USE_IOCTL == 1
-DRESULT USER_ioctl(
-    BYTE pdrv, /* Physical drive nmuber (0..) */
-    BYTE cmd, /* Control code */
-    void* buff /* Buffer to send/receive control data */
-) {
-    /* USER CODE BEGIN IOCTL */
-    DRESULT res = RES_ERROR;
-    BSP_SD_CardInfo CardInfo;
-
-    if(Stat & STA_NOINIT) return RES_NOTRDY;
-
-    switch(cmd) {
-    /* Make sure that no pending write process */
-    case CTRL_SYNC:
-        res = RES_OK;
-        break;
-
-    /* Get number of sectors on the disk (DWORD) */
-    case GET_SECTOR_COUNT:
-        BSP_SD_GetCardInfo(&CardInfo);
-        *(DWORD*)buff = CardInfo.LogBlockNbr;
-        res = RES_OK;
-        break;
-
-    /* Get R/W sector size (WORD) */
-    case GET_SECTOR_SIZE:
-        BSP_SD_GetCardInfo(&CardInfo);
-        *(WORD*)buff = CardInfo.LogBlockSize;
-        res = RES_OK;
-        break;
-
-    /* Get erase block size in unit of sector (DWORD) */
-    case GET_BLOCK_SIZE:
-        BSP_SD_GetCardInfo(&CardInfo);
-        *(DWORD*)buff = CardInfo.LogBlockSize;
-        res = RES_OK;
-        break;
-
-    default:
-        res = RES_PARERR;
-    }
-
-    return res;
-    /* USER CODE END IOCTL */
-}
-#endif /* _USE_IOCTL == 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Src/fatfs/user_diskio.h

@@ -1,48 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
- ******************************************************************************
-  * @file    user_diskio.h
-  * @brief   This file contains the common defines and functions prototypes for  
-  *          the user_diskio driver.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USER_DISKIO_H
-#define __USER_DISKIO_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* USER CODE BEGIN 0 */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32_adafruit_sd.h"
-#include "fatfs/ff_gen_drv.h"
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-extern Diskio_drvTypeDef USER_Driver;
-
-/* USER CODE END 0 */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USER_DISKIO_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Src/freertos-openocd.c

@@ -1,21 +0,0 @@
-
-/*
- * Since at least FreeRTOS V7.5.3 uxTopUsedPriority is no longer
- * present in the kernel, so it has to be supplied by other means for
- * OpenOCD's threads awareness.
- *
- * Add this file to your project, and, if you're using --gc-sections,
- * ``--undefined=uxTopUsedPriority'' (or
- * ``-Wl,--undefined=uxTopUsedPriority'' when using gcc for final
- * linking) to your LDFLAGS; same with all the other symbols you need.
- */
-
-#include "FreeRTOS.h"
-
-#ifdef __GNUC__
-#define USED __attribute__((used))
-#else
-#define USED
-#endif
-
-const int USED uxTopUsedPriority = configMAX_PRIORITIES - 1;

firmware/targets/f3/Src/gpio.c

@@ -1,191 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    gpio.c
-  * @brief   This file provides code for the configuration
-  *          of all used GPIO pins.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "gpio.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/*----------------------------------------------------------------------------*/
-/* Configure GPIO                                                             */
-/*----------------------------------------------------------------------------*/
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/** Configure pins as
-        * Analog
-        * Input
-        * Output
-        * EVENT_OUT
-        * EXTI
-*/
-void MX_GPIO_Init(void)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-
-  /* GPIO Ports Clock Enable */
-  __HAL_RCC_GPIOC_CLK_ENABLE();
-  __HAL_RCC_GPIOH_CLK_ENABLE();
-  __HAL_RCC_GPIOB_CLK_ENABLE();
-  __HAL_RCC_GPIOA_CLK_ENABLE();
-  __HAL_RCC_GPIOE_CLK_ENABLE();
-  __HAL_RCC_GPIOD_CLK_ENABLE();
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOA, LED_RED_Pin|LED_GREEN_Pin|LED_BLUE_Pin, GPIO_PIN_SET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(DISPLAY_RST_GPIO_Port, DISPLAY_RST_Pin, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(NFC_CS_GPIO_Port, NFC_CS_Pin, GPIO_PIN_SET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(DISPLAY_DI_GPIO_Port, DISPLAY_DI_Pin, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(DISPLAY_BACKLIGHT_GPIO_Port, DISPLAY_BACKLIGHT_Pin, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOC, DISPLAY_CS_Pin|SD_CS_Pin, GPIO_PIN_SET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(CC1101_CS_GPIO_Port, CC1101_CS_Pin, GPIO_PIN_SET);
-
-  /*Configure GPIO pins : PCPin PCPin */
-  GPIO_InitStruct.Pin = BUTTON_BACK_Pin|BUTTON_OK_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
-  GPIO_InitStruct.Pull = GPIO_PULLUP;
-  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = BOOT0_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(BOOT0_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PCPin PCPin PCPin PCPin */
-  GPIO_InitStruct.Pin = PC0_Pin|PC1_Pin|PC3_Pin|PC10_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PAPin PAPin PAPin */
-  GPIO_InitStruct.Pin = LED_RED_Pin|LED_GREEN_Pin|LED_BLUE_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PAPin PAPin PAPin PAPin */
-  GPIO_InitStruct.Pin = PA4_Pin|PA5_Pin|PA6_Pin|PA7_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = RFID_PULL_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(RFID_PULL_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = CC1101_G0_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
-  GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-  HAL_GPIO_Init(CC1101_G0_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PBPin PBPin */
-  GPIO_InitStruct.Pin = PB2_Pin|iBTN_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PBPin PBPin PBPin PBPin */
-  GPIO_InitStruct.Pin = BUTTON_UP_Pin|BUTTON_LEFT_Pin|BUTTON_DOWN_Pin|BUTTON_RIGHT_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
-  GPIO_InitStruct.Pull = GPIO_PULLUP;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = DISPLAY_RST_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(DISPLAY_RST_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = NFC_CS_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-  HAL_GPIO_Init(NFC_CS_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : PCPin PCPin */
-  GPIO_InitStruct.Pin = DISPLAY_DI_Pin|DISPLAY_CS_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = DISPLAY_BACKLIGHT_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(DISPLAY_BACKLIGHT_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = SD_CS_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-  HAL_GPIO_Init(SD_CS_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = CC1101_CS_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-  HAL_GPIO_Init(CC1101_CS_GPIO_Port, &GPIO_InitStruct);
-
-  /* EXTI interrupt init*/
-  HAL_NVIC_SetPriority(EXTI1_IRQn, 5, 0);
-  HAL_NVIC_EnableIRQ(EXTI1_IRQn);
-
-  HAL_NVIC_SetPriority(EXTI2_IRQn, 5, 0);
-  HAL_NVIC_EnableIRQ(EXTI2_IRQn);
-
-  HAL_NVIC_SetPriority(EXTI9_5_IRQn, 5, 0);
-  HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
-
-  HAL_NVIC_SetPriority(EXTI15_10_IRQn, 5, 0);
-  HAL_NVIC_EnableIRQ(EXTI15_10_IRQn);
-
-}
-
-/* USER CODE BEGIN 2 */
-
-/* USER CODE END 2 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Src/main.c

@@ -1,291 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : main.c
-  * @brief          : Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-#include "cmsis_os.h"
-#include "adc.h"
-#include "aes.h"
-#include "comp.h"
-#include "crc.h"
-#include "i2c.h"
-#include "pka.h"
-#include "rf.h"
-#include "rng.h"
-#include "rtc.h"
-#include "spi.h"
-#include "tim.h"
-#include "usart.h"
-#include "usb_device.h"
-#include "gpio.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-#include "fatfs/fatfs.h"
-#include "api-hal.h"
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
-
-/* USER CODE END PTD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-void SystemClock_Config(void);
-void MX_FREERTOS_Init(void);
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/**
-  * @brief  The application entry point.
-  * @retval int
-  */
-int main(void)
-{
-  /* USER CODE BEGIN 1 */
-
-  /* USER CODE END 1 */
-
-  /* MCU Configuration--------------------------------------------------------*/
-
-  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
-  HAL_Init();
-
-  /* USER CODE BEGIN Init */
-  /* USER CODE END Init */
-
-  /* Configure the system clock */
-  SystemClock_Config();
-
-  /* USER CODE BEGIN SysInit */
-
-  /* USER CODE END SysInit */
-
-  /* Initialize all configured peripherals */
-  MX_GPIO_Init();
-  MX_ADC1_Init();
-  MX_I2C1_Init();
-  MX_RTC_Init();
-  MX_SPI1_Init();
-  MX_SPI2_Init();
-  MX_USART1_UART_Init();
-  MX_USB_Device_Init();
-  MX_TIM1_Init();
-  MX_TIM2_Init();
-  MX_TIM16_Init();
-  MX_COMP1_Init();
-  MX_RF_Init();
-  MX_PKA_Init();
-  MX_RNG_Init();
-  MX_AES1_Init();
-  MX_AES2_Init();
-  MX_CRC_Init();
-  /* USER CODE BEGIN 2 */
-  MX_FATFS_Init();
-  delay_us_init_DWT();
-  api_hal_vcp_init();
-  /* USER CODE END 2 */
-
-  /* Init scheduler */
-  osKernelInitialize();  /* Call init function for freertos objects (in freertos.c) */
-  MX_FREERTOS_Init();
-  /* Start scheduler */
-  osKernelStart();
-
-  /* We should never get here as control is now taken by the scheduler */
-  /* Infinite loop */
-  /* USER CODE BEGIN WHILE */
-  while (1)
-  {
-    /* USER CODE END WHILE */
-
-    /* USER CODE BEGIN 3 */
-  }
-  /* USER CODE END 3 */
-}
-
-/**
-  * @brief System Clock Configuration
-  * @retval None
-  */
-void SystemClock_Config(void)
-{
-  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
-  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
-  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
-
-  /** Configure LSE Drive Capability
-  */
-  HAL_PWR_EnableBkUpAccess();
-  __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_MEDIUMLOW);
-  /** Configure the main internal regulator output voltage
-  */
-  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
-  /** Initializes the RCC Oscillators according to the specified parameters
-  * in the RCC_OscInitTypeDef structure.
-  */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE
-                              |RCC_OSCILLATORTYPE_LSE;
-  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
-  RCC_OscInitStruct.LSEState = RCC_LSE_ON;
-  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
-  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
-  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
-  RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV2;
-  RCC_OscInitStruct.PLL.PLLN = 8;
-  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
-  RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
-  RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
-  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers
-  */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK4|RCC_CLOCKTYPE_HCLK2
-                              |RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
-                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
-  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
-  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
-  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
-  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
-  RCC_ClkInitStruct.AHBCLK2Divider = RCC_SYSCLK_DIV2;
-  RCC_ClkInitStruct.AHBCLK4Divider = RCC_SYSCLK_DIV1;
-
-  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /** Initializes the peripherals clocks
-  */
-  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS|RCC_PERIPHCLK_RFWAKEUP
-                              |RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART1
-                              |RCC_PERIPHCLK_I2C1|RCC_PERIPHCLK_CLK48SEL
-                              |RCC_PERIPHCLK_USB|RCC_PERIPHCLK_RNG
-                              |RCC_PERIPHCLK_ADC;
-  PeriphClkInitStruct.PLLSAI1.PLLN = 6;
-  PeriphClkInitStruct.PLLSAI1.PLLP = RCC_PLLP_DIV2;
-  PeriphClkInitStruct.PLLSAI1.PLLQ = RCC_PLLQ_DIV2;
-  PeriphClkInitStruct.PLLSAI1.PLLR = RCC_PLLR_DIV2;
-  PeriphClkInitStruct.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_USBCLK|RCC_PLLSAI1_ADCCLK;
-  PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
-  PeriphClkInitStruct.I2c1ClockSelection = RCC_I2C1CLKSOURCE_PCLK1;
-  PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
-  PeriphClkInitStruct.RngClockSelection = RCC_RNGCLKSOURCE_CLK48;
-  PeriphClkInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_PLLSAI1;
-  PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
-  PeriphClkInitStruct.RFWakeUpClockSelection = RCC_RFWKPCLKSOURCE_LSE;
-  PeriphClkInitStruct.SmpsClockSelection = RCC_SMPSCLKSOURCE_HSE;
-  PeriphClkInitStruct.SmpsDivSelection = RCC_SMPSCLKDIV_RANGE0;
-  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN Smps */
-  if (!LL_RCC_LSE_IsReady()) {
-    LL_RCC_ForceBackupDomainReset();
-    LL_RCC_ReleaseBackupDomainReset();
-    NVIC_SystemReset();
-  }
-  /* USER CODE END Smps */
-  /** Enables the Clock Security System
-  */
-  HAL_RCC_EnableCSS();
-  /** Enables the Clock Security System
-  */
-  HAL_RCCEx_EnableLSECSS();
-}
-
-/* USER CODE BEGIN 4 */
-
-/* USER CODE END 4 */
-
- /**
-  * @brief  Period elapsed callback in non blocking mode
-  * @note   This function is called  when TIM17 interrupt took place, inside
-  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
-  * a global variable "uwTick" used as application time base.
-  * @param  htim : TIM handle
-  * @retval None
-  */
-void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
-{
-  /* USER CODE BEGIN Callback 0 */
-
-  /* USER CODE END Callback 0 */
-  if (htim->Instance == TIM17) {
-    HAL_IncTick();
-  }
-  /* USER CODE BEGIN Callback 1 */
-
-  /* USER CODE END Callback 1 */
-}
-
-/**
-  * @brief  This function is executed in case of error occurrence.
-  * @retval None
-  */
-void Error_Handler(void)
-{
-  /* USER CODE BEGIN Error_Handler_Debug */
-  /* User can add his own implementation to report the HAL error return state */
-
-  /* USER CODE END Error_Handler_Debug */
-}
-
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t *file, uint32_t line)
-{
-  /* USER CODE BEGIN 6 */
-  /* User can add his own implementation to report the file name and line number,
-     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-  /* USER CODE END 6 */
-}
-#endif /* USE_FULL_ASSERT */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Src/spi.c

@@ -1,303 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    spi.c
-  * @brief   This file provides code for the configuration
-  *          of the SPI instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "spi.h"
-
-/* USER CODE BEGIN 0 */
-void Enable_SPI(SPI_HandleTypeDef* spi);
-/* USER CODE END 0 */
-
-SPI_HandleTypeDef hspi1;
-SPI_HandleTypeDef hspi2;
-
-/* SPI1 init function */
-void MX_SPI1_Init(void)
-{
-
-  hspi1.Instance = SPI1;
-  hspi1.Init.Mode = SPI_MODE_MASTER;
-  hspi1.Init.Direction = SPI_DIRECTION_2LINES;
-  hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
-  hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
-  hspi1.Init.CLKPhase = SPI_PHASE_2EDGE;
-  hspi1.Init.NSS = SPI_NSS_SOFT;
-  hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
-  hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
-  hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  hspi1.Init.CRCPolynomial = 7;
-  hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  hspi1.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
-  if (HAL_SPI_Init(&hspi1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-/* SPI2 init function */
-void MX_SPI2_Init(void)
-{
-
-  hspi2.Instance = SPI2;
-  hspi2.Init.Mode = SPI_MODE_MASTER;
-  hspi2.Init.Direction = SPI_DIRECTION_2LINES;
-  hspi2.Init.DataSize = SPI_DATASIZE_8BIT;
-  hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
-  hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
-  hspi2.Init.NSS = SPI_NSS_SOFT;
-  hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
-  hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
-  hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  hspi2.Init.CRCPolynomial = 7;
-  hspi2.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  hspi2.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
-  if (HAL_SPI_Init(&hspi2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(spiHandle->Instance==SPI1)
-  {
-  /* USER CODE BEGIN SPI1_MspInit 0 */
-
-  /* USER CODE END SPI1_MspInit 0 */
-    /* SPI1 clock enable */
-    __HAL_RCC_SPI1_CLK_ENABLE();
-
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    /**SPI1 GPIO Configuration
-    PB3     ------> SPI1_SCK
-    PB4     ------> SPI1_MISO
-    PB5     ------> SPI1_MOSI
-    */
-    GPIO_InitStruct.Pin = SPI_R_SCK_Pin|SPI_R_MISO_Pin|SPI_R_MOSI_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
-    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN SPI1_MspInit 1 */
-  
-  // SD Card need faster spi gpio
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /* USER CODE END SPI1_MspInit 1 */
-  }
-  else if(spiHandle->Instance==SPI2)
-  {
-  /* USER CODE BEGIN SPI2_MspInit 0 */
-
-  /* USER CODE END SPI2_MspInit 0 */
-    /* SPI2 clock enable */
-    __HAL_RCC_SPI2_CLK_ENABLE();
-
-    __HAL_RCC_GPIOB_CLK_ENABLE();
-    __HAL_RCC_GPIOD_CLK_ENABLE();
-    /**SPI2 GPIO Configuration
-    PB15     ------> SPI2_MOSI
-    PD1     ------> SPI2_SCK
-    */
-    GPIO_InitStruct.Pin = SPI_D_MOSI_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
-    HAL_GPIO_Init(SPI_D_MOSI_GPIO_Port, &GPIO_InitStruct);
-
-    GPIO_InitStruct.Pin = SPI_D_SCK_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
-    HAL_GPIO_Init(SPI_D_SCK_GPIO_Port, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN SPI2_MspInit 1 */
-
-  /* USER CODE END SPI2_MspInit 1 */
-  }
-}
-
-void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
-{
-
-  if(spiHandle->Instance==SPI1)
-  {
-  /* USER CODE BEGIN SPI1_MspDeInit 0 */
-
-  /* USER CODE END SPI1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_SPI1_CLK_DISABLE();
-
-    /**SPI1 GPIO Configuration
-    PB3     ------> SPI1_SCK
-    PB4     ------> SPI1_MISO
-    PB5     ------> SPI1_MOSI
-    */
-    HAL_GPIO_DeInit(GPIOB, SPI_R_SCK_Pin|SPI_R_MISO_Pin|SPI_R_MOSI_Pin);
-
-  /* USER CODE BEGIN SPI1_MspDeInit 1 */
-
-  /* USER CODE END SPI1_MspDeInit 1 */
-  }
-  else if(spiHandle->Instance==SPI2)
-  {
-  /* USER CODE BEGIN SPI2_MspDeInit 0 */
-
-  /* USER CODE END SPI2_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_SPI2_CLK_DISABLE();
-
-    /**SPI2 GPIO Configuration
-    PB15     ------> SPI2_MOSI
-    PD1     ------> SPI2_SCK
-    */
-    HAL_GPIO_DeInit(SPI_D_MOSI_GPIO_Port, SPI_D_MOSI_Pin);
-
-    HAL_GPIO_DeInit(SPI_D_SCK_GPIO_Port, SPI_D_SCK_Pin);
-
-  /* USER CODE BEGIN SPI2_MspDeInit 1 */
-
-  /* USER CODE END SPI2_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-void NFC_SPI_Reconfigure() {
-  osKernelLock();
-
-  SPI_R.Init.Mode = SPI_MODE_MASTER;
-  SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
-  SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
-  SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
-  SPI_R.Init.CLKPhase = SPI_PHASE_2EDGE;
-  SPI_R.Init.NSS = SPI_NSS_SOFT;
-  SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8; // 8mhz, 10mhz is max
-  SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
-  SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  SPI_R.Init.CRCPolynomial = 7;
-  SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
-
-  if (HAL_SPI_Init(&SPI_R) != HAL_OK) {
-      Error_Handler();
-  }
-
-  Enable_SPI(&SPI_R);
-
-  osKernelUnlock();
-}
-
-void SD_SPI_Reconfigure_Slow(void) {
-  osKernelLock();
-
-  SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
-  SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
-  SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
-  SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
-  SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
-  SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
-  SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
-  SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
-  SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  SPI_SD_HANDLE.Init.CRCPolynomial = 7;
-  SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
-
-  if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
-      Error_Handler();
-  }
-
-  Enable_SPI(&SPI_SD_HANDLE);
-
-  osKernelUnlock();
-}
-
-void SD_SPI_Reconfigure_Fast(void) {
-  osKernelLock();
-
-  SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
-  SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
-  SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
-  SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
-  SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
-  SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
-  SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
-  SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
-  SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  SPI_SD_HANDLE.Init.CRCPolynomial = 7;
-  SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
-
-  if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
-      Error_Handler();
-  }
-
-  Enable_SPI(&SPI_SD_HANDLE);
-
-  osKernelUnlock();
-}
-
-void CC1101_SPI_Reconfigure(void) {
-  osKernelLock();
-
-  SPI_R.Init.Mode = SPI_MODE_MASTER;
-  SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
-  SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
-  SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
-  SPI_R.Init.CLKPhase = SPI_PHASE_1EDGE;
-  SPI_R.Init.NSS = SPI_NSS_SOFT;
-  SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
-  SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
-  SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  SPI_R.Init.CRCPolynomial = 7;
-  SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-  SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
-
-  if(HAL_SPI_Init(&SPI_R) != HAL_OK) {
-      Error_Handler();
-  }
-
-  Enable_SPI(&SPI_R);
-
-  osKernelUnlock();
-}
-
-void Enable_SPI(SPI_HandleTypeDef* spi_instance){
-  if((spi_instance->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) {
-    __HAL_SPI_ENABLE(spi_instance);
-  }
-}
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Src/stm32wbxx_it.c

@@ -1,378 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file    stm32wbxx_it.c
-  * @brief   Interrupt Service Routines.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-#include "stm32wbxx_it.h"
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN TD */
-
-/* USER CODE END TD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/* External variables --------------------------------------------------------*/
-extern PCD_HandleTypeDef hpcd_USB_FS;
-extern ADC_HandleTypeDef hadc1;
-extern COMP_HandleTypeDef hcomp1;
-extern RTC_HandleTypeDef hrtc;
-extern TIM_HandleTypeDef htim1;
-extern TIM_HandleTypeDef htim2;
-extern TIM_HandleTypeDef htim17;
-
-/* USER CODE BEGIN EV */
-
-/* USER CODE END EV */
-
-/******************************************************************************/
-/*           Cortex Processor Interruption and Exception Handlers          */
-/******************************************************************************/
-/**
-  * @brief This function handles Non maskable interrupt.
-  */
-void NMI_Handler(void)
-{
-  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
-
-  /* USER CODE END NonMaskableInt_IRQn 0 */
-  HAL_RCC_NMI_IRQHandler();
-  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
-
-  /* USER CODE END NonMaskableInt_IRQn 1 */
-}
-
-/**
-  * @brief This function handles Hard fault interrupt.
-  */
-void HardFault_Handler(void)
-{
-  /* USER CODE BEGIN HardFault_IRQn 0 */
-  if ((*(volatile uint32_t *)CoreDebug_BASE) & (1 << 0)) {
-    __asm("bkpt 1");
-  }
-  /* USER CODE END HardFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
-    /* USER CODE END W1_HardFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Memory management fault.
-  */
-void MemManage_Handler(void)
-{
-  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
-
-  /* USER CODE END MemoryManagement_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
-    /* USER CODE END W1_MemoryManagement_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Prefetch fault, memory access fault.
-  */
-void BusFault_Handler(void)
-{
-  /* USER CODE BEGIN BusFault_IRQn 0 */
-
-  /* USER CODE END BusFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
-    /* USER CODE END W1_BusFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Undefined instruction or illegal state.
-  */
-void UsageFault_Handler(void)
-{
-  /* USER CODE BEGIN UsageFault_IRQn 0 */
-
-  /* USER CODE END UsageFault_IRQn 0 */
-  while (1)
-  {
-    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
-    /* USER CODE END W1_UsageFault_IRQn 0 */
-  }
-}
-
-/**
-  * @brief This function handles Debug monitor.
-  */
-void DebugMon_Handler(void)
-{
-  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
-
-  /* USER CODE END DebugMonitor_IRQn 0 */
-  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
-
-  /* USER CODE END DebugMonitor_IRQn 1 */
-}
-
-/******************************************************************************/
-/* STM32WBxx Peripheral Interrupt Handlers                                    */
-/* Add here the Interrupt Handlers for the used peripherals.                  */
-/* For the available peripheral interrupt handler names,                      */
-/* please refer to the startup file (startup_stm32wbxx.s).                    */
-/******************************************************************************/
-
-/**
-  * @brief This function handles RTC tamper and time stamp, CSS on LSE interrupts through EXTI line 18.
-  */
-void TAMP_STAMP_LSECSS_IRQHandler(void)
-{
-  /* USER CODE BEGIN TAMP_STAMP_LSECSS_IRQn 0 */
-  HAL_RCC_CSSCallback();
-  /* USER CODE END TAMP_STAMP_LSECSS_IRQn 0 */
-  /* USER CODE BEGIN TAMP_STAMP_LSECSS_IRQn 1 */
-
-  /* USER CODE END TAMP_STAMP_LSECSS_IRQn 1 */
-}
-
-/**
-  * @brief This function handles RCC global interrupt.
-  */
-void RCC_IRQHandler(void)
-{
-  /* USER CODE BEGIN RCC_IRQn 0 */
-  if (!LL_RCC_LSE_IsReady()) {
-    HAL_RCC_CSSCallback();
-  }
-  /* USER CODE END RCC_IRQn 0 */
-  /* USER CODE BEGIN RCC_IRQn 1 */
-
-  /* USER CODE END RCC_IRQn 1 */
-}
-
-/**
-  * @brief This function handles EXTI line1 interrupt.
-  */
-void EXTI1_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI1_IRQn 0 */
-
-  /* USER CODE END EXTI1_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_1);
-  /* USER CODE BEGIN EXTI1_IRQn 1 */
-
-  /* USER CODE END EXTI1_IRQn 1 */
-}
-
-/**
-  * @brief This function handles EXTI line2 interrupt.
-  */
-void EXTI2_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI2_IRQn 0 */
-
-  /* USER CODE END EXTI2_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_2);
-  /* USER CODE BEGIN EXTI2_IRQn 1 */
-
-  /* USER CODE END EXTI2_IRQn 1 */
-}
-
-/**
-  * @brief This function handles ADC1 global interrupt.
-  */
-void ADC1_IRQHandler(void)
-{
-  /* USER CODE BEGIN ADC1_IRQn 0 */
-
-  /* USER CODE END ADC1_IRQn 0 */
-  HAL_ADC_IRQHandler(&hadc1);
-  /* USER CODE BEGIN ADC1_IRQn 1 */
-
-  /* USER CODE END ADC1_IRQn 1 */
-}
-
-/**
-  * @brief This function handles USB low priority interrupt, USB wake-up interrupt through EXTI line 28.
-  */
-void USB_LP_IRQHandler(void)
-{
-  /* USER CODE BEGIN USB_LP_IRQn 0 */
-
-  /* USER CODE END USB_LP_IRQn 0 */
-  HAL_PCD_IRQHandler(&hpcd_USB_FS);
-  /* USER CODE BEGIN USB_LP_IRQn 1 */
-
-  /* USER CODE END USB_LP_IRQn 1 */
-}
-
-/**
-  * @brief This function handles COMP1 and COMP2 interrupts through EXTI lines 20 and 21.
-  */
-void COMP_IRQHandler(void)
-{
-  /* USER CODE BEGIN COMP_IRQn 0 */
-
-  /* USER CODE END COMP_IRQn 0 */
-  HAL_COMP_IRQHandler(&hcomp1);
-  /* USER CODE BEGIN COMP_IRQn 1 */
-
-  /* USER CODE END COMP_IRQn 1 */
-}
-
-/**
-  * @brief This function handles EXTI line[9:5] interrupts.
-  */
-void EXTI9_5_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI9_5_IRQn 0 */
-
-  /* USER CODE END EXTI9_5_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_8);
-  /* USER CODE BEGIN EXTI9_5_IRQn 1 */
-
-  /* USER CODE END EXTI9_5_IRQn 1 */
-}
-
-/**
-  * @brief This function handles TIM1 trigger and commutation interrupts and TIM17 global interrupt.
-  */
-void TIM1_TRG_COM_TIM17_IRQHandler(void)
-{
-  /* USER CODE BEGIN TIM1_TRG_COM_TIM17_IRQn 0 */
-
-  /* USER CODE END TIM1_TRG_COM_TIM17_IRQn 0 */
-  HAL_TIM_IRQHandler(&htim1);
-  HAL_TIM_IRQHandler(&htim17);
-  /* USER CODE BEGIN TIM1_TRG_COM_TIM17_IRQn 1 */
-
-  /* USER CODE END TIM1_TRG_COM_TIM17_IRQn 1 */
-}
-
-/**
-  * @brief This function handles TIM2 global interrupt.
-  */
-void TIM2_IRQHandler(void)
-{
-  /* USER CODE BEGIN TIM2_IRQn 0 */
-
-  /* USER CODE END TIM2_IRQn 0 */
-  HAL_TIM_IRQHandler(&htim2);
-  /* USER CODE BEGIN TIM2_IRQn 1 */
-
-  /* USER CODE END TIM2_IRQn 1 */
-}
-
-/**
-  * @brief This function handles EXTI line[15:10] interrupts.
-  */
-void EXTI15_10_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI15_10_IRQn 0 */
-
-  /* USER CODE END EXTI15_10_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_10);
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_11);
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_12);
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_13);
-  /* USER CODE BEGIN EXTI15_10_IRQn 1 */
-
-  /* USER CODE END EXTI15_10_IRQn 1 */
-}
-
-/**
-  * @brief This function handles HSEM global interrupt.
-  */
-void HSEM_IRQHandler(void)
-{
-  /* USER CODE BEGIN HSEM_IRQn 0 */
-
-  /* USER CODE END HSEM_IRQn 0 */
-  HAL_HSEM_IRQHandler();
-  /* USER CODE BEGIN HSEM_IRQn 1 */
-
-  /* USER CODE END HSEM_IRQn 1 */
-}
-
-/* USER CODE BEGIN 1 */
-void EXTI4_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI4_IRQn 0 */
-
-  /* USER CODE END EXTI4_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_4);
-  /* USER CODE BEGIN EXTI4_IRQn 1 */
-
-  /* USER CODE END EXTI4_IRQn 1 */
-}
-
-extern void HW_TS_RTC_Wakeup_Handler();
-extern void HW_IPCC_Tx_Handler();
-extern void HW_IPCC_Rx_Handler();
-
-
-void RTC_WKUP_IRQHandler(void)
-{
-  HW_TS_RTC_Wakeup_Handler();
-}
-
-void IPCC_C1_TX_IRQHandler(void)
-{
-  HW_IPCC_Tx_Handler();
-
-  return;
-}
-
-void IPCC_C1_RX_IRQHandler(void)
-{
-  HW_IPCC_Rx_Handler();
-  return;
-}
-
-/* USER CODE END 1 */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/Src/target-resources.c

@@ -1,11 +0,0 @@
-#include "main.h"
-#include "flipper_v2.h"
-
-const bool input_invert[GPIO_INPUT_PINS_COUNT] = {
-    true, // {BUTTON_UP_GPIO_Port, BUTTON_UP_Pin},
-    true, // {BUTTON_DOWN_GPIO_Port, BUTTON_DOWN_Pin},
-    true, // {BUTTON_RIGHT_GPIO_Port, BUTTON_RIGHT_Pin},
-    true, // {BUTTON_LEFT_GPIO_Port, BUTTON_LEFT_Pin},
-    true, // {BUTTON_OK_GPIO_Port, BUTTON_OK_Pin},
-    true, // {BUTTON_BACK_GPIO_Port, BUTTON_BACK_Pin},
-};

firmware/targets/f3/api-hal/api-hal-gpio.h

@@ -1,77 +0,0 @@
-#pragma once
-#include "main.h"
-#include "stdbool.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// this defined in xx_hal_gpio.c, so...
-#define GPIO_NUMBER (16U)
-
-typedef enum {
-    GpioModeInput = GPIO_MODE_INPUT,
-    GpioModeOutputPushPull = GPIO_MODE_OUTPUT_PP,
-    GpioModeOutputOpenDrain = GPIO_MODE_OUTPUT_OD,
-    GpioModeAltFunctionPushPull = GPIO_MODE_AF_PP,
-    GpioModeAltFunctionOpenDrain = GPIO_MODE_AF_OD,
-    GpioModeAnalog = GPIO_MODE_ANALOG,
-    GpioModeInterruptRise = GPIO_MODE_IT_RISING,
-    GpioModeInterruptFall = GPIO_MODE_IT_FALLING,
-    GpioModeInterruptRiseFall = GPIO_MODE_IT_RISING_FALLING,
-    GpioModeEventRise = GPIO_MODE_EVT_RISING,
-    GpioModeEventFall = GPIO_MODE_EVT_FALLING,
-    GpioModeEventRiseFall = GPIO_MODE_EVT_RISING_FALLING,
-} GpioMode;
-
-typedef enum {
-    GpioSpeedLow = GPIO_SPEED_FREQ_LOW,
-    GpioSpeedMedium = GPIO_SPEED_FREQ_MEDIUM,
-    GpioSpeedHigh = GPIO_SPEED_FREQ_HIGH,
-    GpioSpeedVeryHigh = GPIO_SPEED_FREQ_VERY_HIGH,
-} GpioSpeed;
-
-typedef enum {
-    GpioPullNo = GPIO_NOPULL,
-    GpioPullUp = GPIO_PULLUP,
-    GpioPullDown = GPIO_PULLDOWN,
-} GpioPull;
-
-typedef struct {
-    GPIO_TypeDef* port;
-    uint16_t pin;
-} GpioPin;
-
-// init GPIO
-void hal_gpio_init(
-    const GpioPin* gpio,
-    const GpioMode mode,
-    const GpioPull pull,
-    const GpioSpeed speed);
-
-// write value to GPIO, false = LOW, true = HIGH
-static inline void hal_gpio_write(const GpioPin* gpio, const bool state) {
-    // writing to BSSR is an atomic operation
-    if(state == true) {
-        gpio->port->BSRR = gpio->pin;
-    } else {
-        gpio->port->BSRR = (uint32_t)gpio->pin << GPIO_NUMBER;
-    }
-}
-
-// read value from GPIO, false = LOW, true = HIGH
-static inline bool hal_gpio_read(const GpioPin* gpio) {
-    if((gpio->port->IDR & gpio->pin) != 0x00U) {
-        return true;
-    } else {
-        return false;
-    }
-}
-
-bool hal_gpio_read_sd_detect(void);
-
-void enable_cc1101_irq();
-
-#ifdef __cplusplus
-}
-#endif

firmware/targets/f3/api-hal/api-hal-pwm.h

@@ -1,11 +0,0 @@
-#pragma once
-#include "main.h"
-#include "stdbool.h"
-
-void hal_pwm_set(float value, float freq, TIM_HandleTypeDef* tim, uint32_t channel);
-void hal_pwmn_set(float value, float freq, TIM_HandleTypeDef* tim, uint32_t channel);
-void hal_pwm_stop(TIM_HandleTypeDef* tim, uint32_t channel);
-void hal_pwmn_stop(TIM_HandleTypeDef* tim, uint32_t channel);
-
-void irda_pwm_set(float value, float freq);
-void irda_pwm_stop();

firmware/targets/f3/api-hal/api-hal-task.c

@@ -1,59 +0,0 @@
-#include "cmsis_os.h"
-#include "api-hal-task.h"
-
-//-----------------------------cmsis_os2.c-------------------------------
-// helpers to get isr context
-// get arch
-#ifndef __ARM_ARCH_6M__
-#define __ARM_ARCH_6M__ 0
-#endif
-#ifndef __ARM_ARCH_7M__
-#define __ARM_ARCH_7M__ 0
-#endif
-#ifndef __ARM_ARCH_7EM__
-#define __ARM_ARCH_7EM__ 0
-#endif
-#ifndef __ARM_ARCH_8M_MAIN__
-#define __ARM_ARCH_8M_MAIN__ 0
-#endif
-#ifndef __ARM_ARCH_7A__
-#define __ARM_ARCH_7A__ 0
-#endif
-
-// get masks
-#if((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M_MAIN__ == 1U))
-#define IS_IRQ_MASKED() ((__get_PRIMASK() != 0U) || (__get_BASEPRI() != 0U))
-#elif(__ARM_ARCH_6M__ == 1U)
-#define IS_IRQ_MASKED() (__get_PRIMASK() != 0U)
-#elif(__ARM_ARCH_7A__ == 1U)
-/* CPSR mask bits */
-#define CPSR_MASKBIT_I 0x80U
-
-#define IS_IRQ_MASKED() ((__get_CPSR() & CPSR_MASKBIT_I) != 0U)
-#else
-#define IS_IRQ_MASKED() (__get_PRIMASK() != 0U)
-#endif
-
-// get is irq mode
-#if(__ARM_ARCH_7A__ == 1U)
-/* CPSR mode bitmasks */
-#define CPSR_MODE_USER 0x10U
-#define CPSR_MODE_SYSTEM 0x1FU
-
-#define IS_IRQ_MODE() ((__get_mode() != CPSR_MODE_USER) && (__get_mode() != CPSR_MODE_SYSTEM))
-#else
-#define IS_IRQ_MODE() (__get_IPSR() != 0U)
-#endif
-
-// added osKernelGetState(), because KernelState is a static var
-#define IS_IRQ() (IS_IRQ_MODE() || (IS_IRQ_MASKED() && (osKernelGetState() == osKernelRunning)))
-//-------------------------end of cmsis_os2.c----------------------------
-
-bool task_is_isr_context(void) {
-    return IS_IRQ();
-}
-
-bool task_equal(TaskHandle_t a, TaskHandle_t b) {
-    if(a == NULL || b == NULL) return false;
-    return a == b;
-}

firmware/targets/f3/api-hal/api-hal-tim.h

@@ -1,4 +0,0 @@
-#pragma once
-#include "main.h"
-
-void tim_irda_rx_init(void);

firmware/targets/f3/api-hal/api-hal-vcp.c

@@ -1,92 +0,0 @@
-#include <api-hal-vcp.h>
-#include <usbd_cdc_if.h>
-#include <flipper_v2.h>
-#include <stream_buffer.h>
-
-#define API_HAL_VCP_RX_BUFFER_SIZE 600
-
-typedef struct {
-    StreamBufferHandle_t rx_stream;
-    osSemaphoreId_t tx_semaphore;
-    volatile bool alive;
-    volatile bool underrun;
-} ApiHalVcp;
-
-ApiHalVcp api_hal_vcp;
-
-static const uint8_t ascii_soh = 0x01;
-static const uint8_t ascii_eot = 0x04;
-
-void _api_hal_vcp_init();
-void _api_hal_vcp_deinit();
-void _api_hal_vcp_control_line(uint8_t state);
-void _api_hal_vcp_rx_callback(const uint8_t* buffer, size_t size);
-void _api_hal_vcp_tx_complete(size_t size);
-
-void api_hal_vcp_init() {
-    api_hal_vcp.rx_stream = xStreamBufferCreate(API_HAL_VCP_RX_BUFFER_SIZE, 1);
-    api_hal_vcp.tx_semaphore = osSemaphoreNew(1, 1, NULL);
-    api_hal_vcp.alive = false;
-    api_hal_vcp.underrun = false;
-}
-
-void _api_hal_vcp_init() {
-    osSemaphoreRelease(api_hal_vcp.tx_semaphore);
-}
-
-void _api_hal_vcp_deinit() {
-    api_hal_vcp.alive = false;
-    osSemaphoreRelease(api_hal_vcp.tx_semaphore);
-}
-
-void _api_hal_vcp_control_line(uint8_t state) {
-    // bit 0: DTR state, bit 1: RTS state
-    // bool dtr = state & 0b01;
-    bool rts = state & 0b10;
-
-    if (rts) {
-        api_hal_vcp.alive = true;
-        _api_hal_vcp_rx_callback(&ascii_soh, 1); // SOH
-    } else {
-        api_hal_vcp.alive = false;
-        _api_hal_vcp_rx_callback(&ascii_eot, 1); // EOT
-    }
-
-    osSemaphoreRelease(api_hal_vcp.tx_semaphore);
-}
-
-void _api_hal_vcp_rx_callback(const uint8_t* buffer, size_t size) {
-    BaseType_t xHigherPriorityTaskWoken = pdFALSE;
-    size_t ret = xStreamBufferSendFromISR(api_hal_vcp.rx_stream, buffer, size, &xHigherPriorityTaskWoken);
-    if (ret != size) {
-        api_hal_vcp.underrun = true;
-    }
-    portYIELD_FROM_ISR(xHigherPriorityTaskWoken);
-}
-
-void _api_hal_vcp_tx_complete(size_t size) {
-    osSemaphoreRelease(api_hal_vcp.tx_semaphore);
-}
-
-size_t api_hal_vcp_rx(uint8_t* buffer, size_t size) {
-    return xStreamBufferReceive(api_hal_vcp.rx_stream, buffer, size, portMAX_DELAY);
-}
-
-void api_hal_vcp_tx(uint8_t* buffer, size_t size) {
-    while (size > 0 && api_hal_vcp.alive) {
-        furi_check(osSemaphoreAcquire(api_hal_vcp.tx_semaphore, osWaitForever) == osOK);
-
-        size_t batch_size = size;
-        if (batch_size > APP_TX_DATA_SIZE) {
-            batch_size = APP_TX_DATA_SIZE;
-        }
-
-        if (CDC_Transmit_FS(buffer, batch_size) == USBD_OK) {
-            size -= batch_size;
-            buffer += batch_size;
-        } else {
-            // Shouldn't be there 
-            osDelay(100);
-        }
-    }
-}

firmware/targets/f3/f3-1/Inc/FreeRTOSConfig.h

@@ -1,172 +0,0 @@
-/* USER CODE BEGIN Header */
-/*
- * FreeRTOS Kernel V10.2.1
- * Portion Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- * Portion Copyright (C) 2019 StMicroelectronics, Inc.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- *
- * 1 tab == 4 spaces!
- */
-/* USER CODE END Header */
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
- * Application specific definitions.
- *
- * These definitions should be adjusted for your particular hardware and
- * application requirements.
- *
- * These parameters and more are described within the 'configuration' section of the
- * FreeRTOS API documentation available on the FreeRTOS.org web site.
- *
- * See http://www.freertos.org/a00110.html
- *----------------------------------------------------------*/
-
-/* USER CODE BEGIN Includes */
-/* Section where include file can be added */
-/* USER CODE END Includes */
-
-/* Ensure definitions are only used by the compiler, and not by the assembler. */
-#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
-  #include <stdint.h>
-  extern uint32_t SystemCoreClock;
-/* USER CODE BEGIN 0 */
-  extern void configureTimerForRunTimeStats(void);
-  extern unsigned long getRunTimeCounterValue(void);
-/* USER CODE END 0 */
-#endif
-#define configENABLE_FPU                         1
-#define configENABLE_MPU                         0
-
-#define configUSE_PREEMPTION                     1
-#define configSUPPORT_STATIC_ALLOCATION          1
-#define configSUPPORT_DYNAMIC_ALLOCATION         1
-#define configUSE_IDLE_HOOK                      1
-#define configUSE_TICK_HOOK                      0
-#define configCPU_CLOCK_HZ                       ( SystemCoreClock )
-#define configTICK_RATE_HZ                       ((TickType_t)1000)
-#define configMAX_PRIORITIES                     ( 56 )
-#define configMINIMAL_STACK_SIZE                 ((uint16_t)128)
-#define configTOTAL_HEAP_SIZE                    ((size_t)40960)
-#define configMAX_TASK_NAME_LEN                  ( 16 )
-#define configGENERATE_RUN_TIME_STATS            1
-#define configUSE_TRACE_FACILITY                 1
-#define configUSE_16_BIT_TICKS                   0
-#define configUSE_MUTEXES                        1
-#define configQUEUE_REGISTRY_SIZE                8
-#define configCHECK_FOR_STACK_OVERFLOW           1
-#define configUSE_RECURSIVE_MUTEXES              1
-#define configUSE_COUNTING_SEMAPHORES            1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION  0
-#define configRECORD_STACK_HIGH_ADDRESS          1
-/* USER CODE BEGIN MESSAGE_BUFFER_LENGTH_TYPE */
-/* Defaults to size_t for backward compatibility, but can be changed
-   if lengths will always be less than the number of bytes in a size_t. */
-#define configMESSAGE_BUFFER_LENGTH_TYPE         size_t
-#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 1
-/* USER CODE END MESSAGE_BUFFER_LENGTH_TYPE */
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES                    0
-#define configMAX_CO_ROUTINE_PRIORITIES          ( 2 )
-
-/* Software timer definitions. */
-#define configUSE_TIMERS                         1
-#define configTIMER_TASK_PRIORITY                ( 2 )
-#define configTIMER_QUEUE_LENGTH                 10
-#define configTIMER_TASK_STACK_DEPTH             256
-
-/* Set the following definitions to 1 to include the API function, or zero
-to exclude the API function. */
-#define INCLUDE_vTaskPrioritySet             1
-#define INCLUDE_uxTaskPriorityGet            1
-#define INCLUDE_vTaskDelete                  1
-#define INCLUDE_vTaskCleanUpResources        0
-#define INCLUDE_vTaskSuspend                 1
-#define INCLUDE_vTaskDelayUntil              1
-#define INCLUDE_vTaskDelay                   1
-#define INCLUDE_xTaskGetSchedulerState       1
-#define INCLUDE_xTimerPendFunctionCall       1
-#define INCLUDE_xQueueGetMutexHolder         1
-#define INCLUDE_uxTaskGetStackHighWaterMark  1
-#define INCLUDE_eTaskGetState                1
-
-/*
- * The CMSIS-RTOS V2 FreeRTOS wrapper is dependent on the heap implementation used
- * by the application thus the correct define need to be enabled below
- */
-#define USE_FreeRTOS_HEAP_4
-
-/* Cortex-M specific definitions. */
-#ifdef __NVIC_PRIO_BITS
- /* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
- #define configPRIO_BITS         __NVIC_PRIO_BITS
-#else
- #define configPRIO_BITS         4
-#endif
-
-/* The lowest interrupt priority that can be used in a call to a "set priority"
-function. */
-#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY   15
-
-/* The highest interrupt priority that can be used by any interrupt service
-routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
-INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
-PRIORITY THAN THIS! (higher priorities are lower numeric values. */
-#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
-
-/* Interrupt priorities used by the kernel port layer itself.  These are generic
-to all Cortex-M ports, and do not rely on any particular library functions. */
-#define configKERNEL_INTERRUPT_PRIORITY 		( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
-See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
-#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
-
-/* Normal assert() semantics without relying on the provision of an assert.h
-header file. */
-/* USER CODE BEGIN 1 */
-#define configASSERT( x ) if ((x) == 0) {taskDISABLE_INTERRUPTS(); for( ;; );}
-/* USER CODE END 1 */
-
-/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
-standard names. */
-#define vPortSVCHandler    SVC_Handler
-#define xPortPendSVHandler PendSV_Handler
-
-/* IMPORTANT: This define is commented when used with STM32Cube firmware, when the timebase source is SysTick,
-              to prevent overwriting SysTick_Handler defined within STM32Cube HAL */
-
-#define xPortSysTickHandler SysTick_Handler
-
-/* USER CODE BEGIN 2 */
-/* Definitions needed when configGENERATE_RUN_TIME_STATS is on */
-#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS configureTimerForRunTimeStats
-#define portGET_RUN_TIME_COUNTER_VALUE getRunTimeCounterValue
-/* USER CODE END 2 */
-
-/* USER CODE BEGIN Defines */
-/* Section where parameter definitions can be added (for instance, to override default ones in FreeRTOS.h) */
-/* USER CODE END Defines */
-
-#endif /* FREERTOS_CONFIG_H */

firmware/targets/f3/f3-1/Inc/adc.h

@@ -1,52 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    adc.h
-  * @brief   This file contains all the function prototypes for
-  *          the adc.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __ADC_H__
-#define __ADC_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern ADC_HandleTypeDef hadc1;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_ADC1_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __ADC_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/aes.h

@@ -1,54 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    aes.h
-  * @brief   This file contains all the function prototypes for
-  *          the aes.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __AES_H__
-#define __AES_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern CRYP_HandleTypeDef hcryp1;
-extern CRYP_HandleTypeDef hcryp2;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_AES1_Init(void);
-void MX_AES2_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __AES_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/comp.h

@@ -1,52 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    comp.h
-  * @brief   This file contains all the function prototypes for
-  *          the comp.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __COMP_H__
-#define __COMP_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern COMP_HandleTypeDef hcomp1;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_COMP1_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __COMP_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/crc.h

@@ -1,52 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    crc.h
-  * @brief   This file contains all the function prototypes for
-  *          the crc.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __CRC_H__
-#define __CRC_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern CRC_HandleTypeDef hcrc;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_CRC_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CRC_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/gpio.h

@@ -1,49 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    gpio.h
-  * @brief   This file contains all the function prototypes for
-  *          the gpio.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __GPIO_H__
-#define __GPIO_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_GPIO_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*__ GPIO_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/i2c.h

@@ -1,54 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    i2c.h
-  * @brief   This file contains all the function prototypes for
-  *          the i2c.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __I2C_H__
-#define __I2C_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern I2C_HandleTypeDef hi2c1;
-
-/* USER CODE BEGIN Private defines */
-
-#define POWER_I2C hi2c1
-
-/* USER CODE END Private defines */
-
-void MX_I2C1_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __I2C_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/pka.h

@@ -1,52 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    pka.h
-  * @brief   This file contains all the function prototypes for
-  *          the pka.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __PKA_H__
-#define __PKA_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern PKA_HandleTypeDef hpka;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_PKA_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __PKA_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/rf.h

@@ -1,50 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    rf.h
-  * @brief   This file contains all the function prototypes for
-  *          the rf.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __RF_H__
-#define __RF_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_RF_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __RF_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/rng.h

@@ -1,52 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    rng.h
-  * @brief   This file contains all the function prototypes for
-  *          the rng.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __RNG_H__
-#define __RNG_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern RNG_HandleTypeDef hrng;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_RNG_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __RNG_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/rtc.h

@@ -1,52 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    rtc.h
-  * @brief   This file contains all the function prototypes for
-  *          the rtc.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __RTC_H__
-#define __RTC_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern RTC_HandleTypeDef hrtc;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_RTC_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __RTC_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/spi.h

@@ -1,57 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    spi.h
-  * @brief   This file contains all the function prototypes for
-  *          the spi.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __SPI_H__
-#define __SPI_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern SPI_HandleTypeDef hspi1;
-extern SPI_HandleTypeDef hspi2;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_SPI1_Init(void);
-void MX_SPI2_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-void NFC_SPI_Reconfigure();
-void SD_SPI_Reconfigure_Slow();
-void SD_SPI_Reconfigure_Fast();
-void CC1101_SPI_Reconfigure();
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __SPI_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/stm32wbxx_hal_conf.h

@@ -1,353 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32wbxx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32WBxx_HAL_CONF_H
-#define __STM32WBxx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-#define HAL_ADC_MODULE_ENABLED
-#define HAL_CRYP_MODULE_ENABLED
-#define HAL_COMP_MODULE_ENABLED
-#define HAL_CRC_MODULE_ENABLED
-#define HAL_HSEM_MODULE_ENABLED
-#define HAL_I2C_MODULE_ENABLED
-/*#define HAL_IPCC_MODULE_ENABLED   */
-/*#define HAL_IRDA_MODULE_ENABLED   */
-/*#define HAL_IWDG_MODULE_ENABLED   */
-/*#define HAL_LCD_MODULE_ENABLED   */
-/*#define HAL_LPTIM_MODULE_ENABLED   */
-#define HAL_PCD_MODULE_ENABLED
-#define HAL_PKA_MODULE_ENABLED
-/*#define HAL_QSPI_MODULE_ENABLED   */
-#define HAL_RNG_MODULE_ENABLED
-#define HAL_RTC_MODULE_ENABLED
-/*#define HAL_SAI_MODULE_ENABLED   */
-/*#define HAL_SMBUS_MODULE_ENABLED   */
-/*#define HAL_SMARTCARD_MODULE_ENABLED   */
-#define HAL_SPI_MODULE_ENABLED
-#define HAL_TIM_MODULE_ENABLED
-/*#define HAL_TSC_MODULE_ENABLED   */
-#define HAL_UART_MODULE_ENABLED
-/*#define HAL_USART_MODULE_ENABLED   */
-/*#define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_EXTI_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-
-#define USE_HAL_ADC_REGISTER_CALLBACKS       0u
-#define USE_HAL_COMP_REGISTER_CALLBACKS      0u
-#define USE_HAL_CRYP_REGISTER_CALLBACKS      0u
-#define USE_HAL_I2C_REGISTER_CALLBACKS       0u
-#define USE_HAL_IRDA_REGISTER_CALLBACKS      0u
-#define USE_HAL_LPTIM_REGISTER_CALLBACKS     0u
-#define USE_HAL_PCD_REGISTER_CALLBACKS       0u
-#define USE_HAL_PKA_REGISTER_CALLBACKS       0u
-#define USE_HAL_QSPI_REGISTER_CALLBACKS      0u
-#define USE_HAL_RNG_REGISTER_CALLBACKS       0u
-#define USE_HAL_RTC_REGISTER_CALLBACKS       0u
-#define USE_HAL_SAI_REGISTER_CALLBACKS       0u
-#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u
-#define USE_HAL_SMBUS_REGISTER_CALLBACKS     0u
-#define USE_HAL_SPI_REGISTER_CALLBACKS       0u
-#define USE_HAL_TIM_REGISTER_CALLBACKS       0u
-#define USE_HAL_TSC_REGISTER_CALLBACKS       0u
-#define USE_HAL_UART_REGISTER_CALLBACKS      0u
-#define USE_HAL_USART_REGISTER_CALLBACKS     0u
-#define USE_HAL_WWDG_REGISTER_CALLBACKS      0u
-
-/* ########################## Oscillator Values adaptation ####################*/
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-#define HSE_VALUE    32000000U             /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal Multiple Speed oscillator (MSI) default value.
-  *        This value is the default MSI range value after Reset.
-  */
-#if !defined  (MSI_VALUE)
-  #define MSI_VALUE    ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
-#endif /* MSI_VALUE */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-#define HSI_VALUE    16000000U            /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI1) value.
-  */
-#if !defined  (LSI1_VALUE)
- #define LSI1_VALUE  ((uint32_t)32000)       /*!< LSI1 Typical Value in Hz*/
-#endif /* LSI1_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.*/
-/**
-  * @brief Internal Low Speed oscillator (LSI2) value.
-  */
-#if !defined  (LSI2_VALUE)
- #define LSI2_VALUE  ((uint32_t)32000)       /*!< LSI2 Typical Value in Hz*/
-#endif /* LSI2_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.*/
-
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  *        This value is used by the UART, RTC HAL module to compute the system frequency
-  */
-#if !defined  (LSE_VALUE)
-#define LSE_VALUE    32768U               /*!< Value of the External oscillator in Hz*/
-#endif /* LSE_VALUE */
-
-/**
-  * @brief Internal Multiple Speed oscillator (HSI48) default value.
-  *        This value is the default HSI48 range value after Reset.
-  */
-#if !defined (HSI48_VALUE)
-  #define HSI48_VALUE    ((uint32_t)48000000) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI48_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-#define LSE_STARTUP_TIMEOUT    1000U      /*!< Time out for LSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for SAI1 peripheral
-  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
-  *        frequency.
-  */
-#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
-  #define EXTERNAL_SAI1_CLOCK_VALUE    ((uint32_t)2097000) /*!< Value of the SAI1 External clock source in Hz*/
-#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-
-#define  VDD_VALUE				3300U                   /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            0U      /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  INSTRUCTION_CACHE_ENABLE     1U
-#define  DATA_CACHE_ENABLE            1U
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1U */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
- * Activated: CRC code is present inside driver
- * Deactivated: CRC code cleaned from driver
- */
-
-#define USE_SPI_CRC                   0U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32wbxx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32wbxx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_COMP_MODULE_ENABLED
-  #include "stm32wbxx_hal_comp.h"
-#endif /* HAL_COMP_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32wbxx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32wbxx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32wbxx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
-  #include "stm32wbxx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32wbxx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32wbxx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_HSEM_MODULE_ENABLED
-  #include "stm32wbxx_hal_hsem.h"
-#endif /* HAL_HSEM_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32wbxx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_IPCC_MODULE_ENABLED
- #include "stm32wbxx_hal_ipcc.h"
-#endif /* HAL_IPCC_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32wbxx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32wbxx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LCD_MODULE_ENABLED
- #include "stm32wbxx_hal_lcd.h"
-#endif /* HAL_LCD_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
-  #include "stm32wbxx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
-  #include "stm32wbxx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_PKA_MODULE_ENABLED
-  #include "stm32wbxx_hal_pka.h"
-#endif /* HAL_PKA_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32wbxx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32wbxx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32wbxx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
-  #include "stm32wbxx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32wbxx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32wbxx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32wbxx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32wbxx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32wbxx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32wbxx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_TSC_MODULE_ENABLED
-  #include "stm32wbxx_hal_tsc.h"
-#endif /* HAL_TSC_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32wbxx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32wbxx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32wbxx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param expr If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32WBxx_HAL_CONF_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/tim.h

@@ -1,58 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    tim.h
-  * @brief   This file contains all the function prototypes for
-  *          the tim.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __TIM_H__
-#define __TIM_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern TIM_HandleTypeDef htim1;
-extern TIM_HandleTypeDef htim2;
-extern TIM_HandleTypeDef htim16;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_TIM1_Init(void);
-void MX_TIM2_Init(void);
-void MX_TIM16_Init(void);
-
-void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __TIM_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/usart.h

@@ -1,52 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    usart.h
-  * @brief   This file contains all the function prototypes for
-  *          the usart.c file
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USART_H__
-#define __USART_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "main.h"
-
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-extern UART_HandleTypeDef huart1;
-
-/* USER CODE BEGIN Private defines */
-
-/* USER CODE END Private defines */
-
-void MX_USART1_UART_Init(void);
-
-/* USER CODE BEGIN Prototypes */
-
-/* USER CODE END Prototypes */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USART_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/usb_device.h

@@ -1,105 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usb_device.h
-  * @version        : v3.0_Cube
-  * @brief          : Header for usb_device.c file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USB_DEVICE__H__
-#define __USB_DEVICE__H__
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32wbxx.h"
-#include "stm32wbxx_hal.h"
-#include "usbd_def.h"
-
-/* USER CODE BEGIN INCLUDE */
-
-/* USER CODE END INCLUDE */
-
-/** @addtogroup USBD_OTG_DRIVER
-  * @{
-  */
-
-/** @defgroup USBD_DEVICE USBD_DEVICE
-  * @brief Device file for Usb otg low level driver.
-  * @{
-  */
-
-/** @defgroup USBD_DEVICE_Exported_Variables USBD_DEVICE_Exported_Variables
-  * @brief Public variables.
-  * @{
-  */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-
-/* USER CODE END PV */
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN PFP */
-
-/* USER CODE END PFP */
-
-/*
- * -- Insert your variables declaration here --
- */
-/* USER CODE BEGIN VARIABLES */
-
-/* USER CODE END VARIABLES */
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DEVICE_Exported_FunctionsPrototype USBD_DEVICE_Exported_FunctionsPrototype
-  * @brief Declaration of public functions for Usb device.
-  * @{
-  */
-
-/** USB Device initialization function. */
-void MX_USB_Device_Init(void);
-
-/*
- * -- Insert functions declaration here --
- */
-/* USER CODE BEGIN FD */
-
-/* USER CODE END FD */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USB_DEVICE__H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/usbd_cdc_if.h

@@ -1,134 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usbd_cdc_if.h
-  * @version        : v3.0_Cube
-  * @brief          : Header for usbd_cdc_if.c file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_CDC_IF_H__
-#define __USBD_CDC_IF_H__
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_cdc.h"
-
-/* USER CODE BEGIN INCLUDE */
-
-/* USER CODE END INCLUDE */
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
-  * @brief For Usb device.
-  * @{
-  */
-
-/** @defgroup USBD_CDC_IF USBD_CDC_IF
-  * @brief Usb VCP device module
-  * @{
-  */
-
-/** @defgroup USBD_CDC_IF_Exported_Defines USBD_CDC_IF_Exported_Defines
-  * @brief Defines.
-  * @{
-  */
-/* USER CODE BEGIN EXPORTED_DEFINES */
-/* Define size for the receive and transmit buffer over CDC */
-/* It's up to user to redefine and/or remove those define */
-#define APP_RX_DATA_SIZE  CDC_DATA_HS_MAX_PACKET_SIZE
-#define APP_TX_DATA_SIZE  CDC_DATA_HS_MAX_PACKET_SIZE
-
-/* USER CODE END EXPORTED_DEFINES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Exported_Types USBD_CDC_IF_Exported_Types
-  * @brief Types.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_TYPES */
-
-/* USER CODE END EXPORTED_TYPES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Exported_Macros USBD_CDC_IF_Exported_Macros
-  * @brief Aliases.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_MACRO */
-
-/* USER CODE END EXPORTED_MACRO */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
-  * @brief Public variables.
-  * @{
-  */
-
-/** CDC Interface callback. */
-extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS;
-
-/* USER CODE BEGIN EXPORTED_VARIABLES */
-
-/* USER CODE END EXPORTED_VARIABLES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype USBD_CDC_IF_Exported_FunctionsPrototype
-  * @brief Public functions declaration.
-  * @{
-  */
-
-uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len);
-
-/* USER CODE BEGIN EXPORTED_FUNCTIONS */
-
-/* USER CODE END EXPORTED_FUNCTIONS */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USBD_CDC_IF_H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/usbd_conf.h

@@ -1,176 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usbd_conf.h
-  * @version        : v3.0_Cube
-  * @brief          : Header for usbd_conf.c file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_CONF__H__
-#define __USBD_CONF__H__
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "stm32wbxx.h"
-#include "stm32wbxx_hal.h"
-
-/* USER CODE BEGIN INCLUDE */
-
-/* USER CODE END INCLUDE */
-
-/** @addtogroup USBD_OTG_DRIVER
-  * @brief Driver for Usb device.
-  * @{
-  */
-
-/** @defgroup USBD_CONF USBD_CONF
-  * @brief Configuration file for Usb otg low level driver.
-  * @{
-  */
-
-/** @defgroup USBD_CONF_Exported_Variables USBD_CONF_Exported_Variables
-  * @brief Public variables.
-  * @{
-  */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN PV */
-/* USER CODE END PV */
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CONF_Exported_Defines USBD_CONF_Exported_Defines
-  * @brief Defines for configuration of the Usb device.
-  * @{
-  */
-
-/*---------- -----------*/
-#define USBD_MAX_NUM_INTERFACES     1U
-/*---------- -----------*/
-#define USBD_MAX_NUM_CONFIGURATION     1U
-/*---------- -----------*/
-#define USBD_MAX_STR_DESC_SIZ     512U
-/*---------- -----------*/
-#define USBD_DEBUG_LEVEL     0U
-/*---------- -----------*/
-#define USBD_LPM_ENABLED     1U
-/*---------- -----------*/
-#define USBD_SELF_POWERED     1U
-
-/****************************************/
-/* #define for FS and HS identification */
-#define DEVICE_FS 		0
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CONF_Exported_Macros USBD_CONF_Exported_Macros
-  * @brief Aliases.
-  * @{
-  */
-
-/* Memory management macros */
-
-/** Alias for memory allocation. */
-#define USBD_malloc         (void *)USBD_static_malloc
-
-/** Alias for memory release. */
-#define USBD_free           USBD_static_free
-
-/** Alias for memory set. */
-#define USBD_memset         memset
-
-/** Alias for memory copy. */
-#define USBD_memcpy         memcpy
-
-/** Alias for delay. */
-#define USBD_Delay          HAL_Delay
-/* DEBUG macros */
-
-#if (USBD_DEBUG_LEVEL > 0)
-#define USBD_UsrLog(...)    printf(__VA_ARGS__);\
-                            printf("\n");
-#else
-#define USBD_UsrLog(...)
-#endif
-
-#if (USBD_DEBUG_LEVEL > 1)
-
-#define USBD_ErrLog(...)    printf("ERROR: ") ;\
-                            printf(__VA_ARGS__);\
-                            printf("\n");
-#else
-#define USBD_ErrLog(...)
-#endif
-
-#if (USBD_DEBUG_LEVEL > 2)
-#define USBD_DbgLog(...)    printf("DEBUG : ") ;\
-                            printf(__VA_ARGS__);\
-                            printf("\n");
-#else
-#define USBD_DbgLog(...)
-#endif
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CONF_Exported_Types USBD_CONF_Exported_Types
-  * @brief Types.
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_CONF_Exported_FunctionsPrototype USBD_CONF_Exported_FunctionsPrototype
-  * @brief Declaration of public functions for Usb device.
-  * @{
-  */
-
-/* Exported functions -------------------------------------------------------*/
-void *USBD_static_malloc(uint32_t size);
-void USBD_static_free(void *p);
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USBD_CONF__H__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Inc/usbd_desc.h

@@ -1,145 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * @file           : usbd_desc.c
-  * @version        : v3.0_Cube
-  * @brief          : Header for usbd_conf.c file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_DESC__C__
-#define __USBD_DESC__C__
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_def.h"
-
-/* USER CODE BEGIN INCLUDE */
-
-/* USER CODE END INCLUDE */
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
-  * @{
-  */
-
-/** @defgroup USBD_DESC USBD_DESC
-  * @brief Usb device descriptors module.
-  * @{
-  */
-
-/** @defgroup USBD_DESC_Exported_Constants USBD_DESC_Exported_Constants
-  * @brief Constants.
-  * @{
-  */
-#define         DEVICE_ID1          (UID_BASE)
-#define         DEVICE_ID2          (UID_BASE + 0x4)
-#define         DEVICE_ID3          (UID_BASE + 0x8)
-
-#define         USB_SIZ_STRING_SERIAL       0x1A
-
-/* USER CODE BEGIN EXPORTED_CONSTANTS */
-
-/* USER CODE END EXPORTED_CONSTANTS */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Exported_Defines USBD_DESC_Exported_Defines
-  * @brief Defines.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_DEFINES */
-
-/* USER CODE END EXPORTED_DEFINES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Exported_TypesDefinitions USBD_DESC_Exported_TypesDefinitions
-  * @brief Types.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_TYPES */
-
-/* USER CODE END EXPORTED_TYPES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Exported_Macros USBD_DESC_Exported_Macros
-  * @brief Aliases.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_MACRO */
-
-/* USER CODE END EXPORTED_MACRO */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Exported_Variables USBD_DESC_Exported_Variables
-  * @brief Public variables.
-  * @{
-  */
-
-extern USBD_DescriptorsTypeDef     CDC_Desc;
-
-/* USER CODE BEGIN EXPORTED_VARIABLES */
-
-/* USER CODE END EXPORTED_VARIABLES */
-
-/**
-  * @}
-  */
-
-/** @defgroup USBD_DESC_Exported_FunctionsPrototype USBD_DESC_Exported_FunctionsPrototype
-  * @brief Public functions declaration.
-  * @{
-  */
-
-/* USER CODE BEGIN EXPORTED_FUNCTIONS */
-
-/* USER CODE END EXPORTED_FUNCTIONS */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USBD_DESC__C__ */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Src/adc.c

@@ -1,128 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    adc.c
-  * @brief   This file provides code for the configuration
-  *          of the ADC instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "adc.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-ADC_HandleTypeDef hadc1;
-
-/* ADC1 init function */
-void MX_ADC1_Init(void)
-{
-  ADC_ChannelConfTypeDef sConfig = {0};
-
-  /** Common config
-  */
-  hadc1.Instance = ADC1;
-  hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
-  hadc1.Init.Resolution = ADC_RESOLUTION_12B;
-  hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
-  hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
-  hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
-  hadc1.Init.LowPowerAutoWait = DISABLE;
-  hadc1.Init.ContinuousConvMode = DISABLE;
-  hadc1.Init.NbrOfConversion = 1;
-  hadc1.Init.DiscontinuousConvMode = DISABLE;
-  hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
-  hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
-  hadc1.Init.DMAContinuousRequests = DISABLE;
-  hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED;
-  hadc1.Init.OversamplingMode = DISABLE;
-  if (HAL_ADC_Init(&hadc1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /** Configure Regular Channel
-  */
-  sConfig.Channel = ADC_CHANNEL_14;
-  sConfig.Rank = ADC_REGULAR_RANK_1;
-  sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
-  sConfig.SingleDiff = ADC_SINGLE_ENDED;
-  sConfig.OffsetNumber = ADC_OFFSET_NONE;
-  sConfig.Offset = 0;
-  if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(adcHandle->Instance==ADC1)
-  {
-  /* USER CODE BEGIN ADC1_MspInit 0 */
-
-  /* USER CODE END ADC1_MspInit 0 */
-    /* ADC1 clock enable */
-    __HAL_RCC_ADC_CLK_ENABLE();
-
-    __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**ADC1 GPIO Configuration
-    PC5     ------> ADC1_IN14
-    */
-    GPIO_InitStruct.Pin = RFID_RF_IN_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(RFID_RF_IN_GPIO_Port, &GPIO_InitStruct);
-
-    /* ADC1 interrupt Init */
-    HAL_NVIC_SetPriority(ADC1_IRQn, 5, 0);
-    HAL_NVIC_EnableIRQ(ADC1_IRQn);
-  /* USER CODE BEGIN ADC1_MspInit 1 */
-
-  /* USER CODE END ADC1_MspInit 1 */
-  }
-}
-
-void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
-{
-
-  if(adcHandle->Instance==ADC1)
-  {
-  /* USER CODE BEGIN ADC1_MspDeInit 0 */
-
-  /* USER CODE END ADC1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_ADC_CLK_DISABLE();
-
-    /**ADC1 GPIO Configuration
-    PC5     ------> ADC1_IN14
-    */
-    HAL_GPIO_DeInit(RFID_RF_IN_GPIO_Port, RFID_RF_IN_Pin);
-
-    /* ADC1 interrupt Deinit */
-    HAL_NVIC_DisableIRQ(ADC1_IRQn);
-  /* USER CODE BEGIN ADC1_MspDeInit 1 */
-
-  /* USER CODE END ADC1_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Src/aes.c

@@ -1,127 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    aes.c
-  * @brief   This file provides code for the configuration
-  *          of the AES instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "aes.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-CRYP_HandleTypeDef hcryp1;
-__ALIGN_BEGIN static const uint32_t pKeyAES1[4] __ALIGN_END = {
-                            0x00000000,0x00000000,0x00000000,0x00000000};
-CRYP_HandleTypeDef hcryp2;
-__ALIGN_BEGIN static const uint32_t pKeyAES2[4] __ALIGN_END = {
-                            0x00000000,0x00000000,0x00000000,0x00000000};
-
-/* AES1 init function */
-void MX_AES1_Init(void)
-{
-
-  hcryp1.Instance = AES1;
-  hcryp1.Init.DataType = CRYP_DATATYPE_32B;
-  hcryp1.Init.KeySize = CRYP_KEYSIZE_128B;
-  hcryp1.Init.pKey = (uint32_t *)pKeyAES1;
-  hcryp1.Init.Algorithm = CRYP_AES_ECB;
-  hcryp1.Init.DataWidthUnit = CRYP_DATAWIDTHUNIT_WORD;
-  hcryp1.Init.KeyIVConfigSkip = CRYP_KEYIVCONFIG_ALWAYS;
-  if (HAL_CRYP_Init(&hcryp1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-/* AES2 init function */
-void MX_AES2_Init(void)
-{
-
-  hcryp2.Instance = AES2;
-  hcryp2.Init.DataType = CRYP_DATATYPE_32B;
-  hcryp2.Init.KeySize = CRYP_KEYSIZE_128B;
-  hcryp2.Init.pKey = (uint32_t *)pKeyAES2;
-  hcryp2.Init.Algorithm = CRYP_AES_ECB;
-  hcryp2.Init.DataWidthUnit = CRYP_DATAWIDTHUNIT_WORD;
-  hcryp2.Init.KeyIVConfigSkip = CRYP_KEYIVCONFIG_ALWAYS;
-  if (HAL_CRYP_Init(&hcryp2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_CRYP_MspInit(CRYP_HandleTypeDef* crypHandle)
-{
-
-  if(crypHandle->Instance==AES1)
-  {
-  /* USER CODE BEGIN AES1_MspInit 0 */
-
-  /* USER CODE END AES1_MspInit 0 */
-    /* AES1 clock enable */
-    __HAL_RCC_AES1_CLK_ENABLE();
-  /* USER CODE BEGIN AES1_MspInit 1 */
-
-  /* USER CODE END AES1_MspInit 1 */
-  }
-  else if(crypHandle->Instance==AES2)
-  {
-  /* USER CODE BEGIN AES2_MspInit 0 */
-
-  /* USER CODE END AES2_MspInit 0 */
-    /* AES2 clock enable */
-    __HAL_RCC_AES2_CLK_ENABLE();
-  /* USER CODE BEGIN AES2_MspInit 1 */
-
-  /* USER CODE END AES2_MspInit 1 */
-  }
-}
-
-void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef* crypHandle)
-{
-
-  if(crypHandle->Instance==AES1)
-  {
-  /* USER CODE BEGIN AES1_MspDeInit 0 */
-
-  /* USER CODE END AES1_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_AES1_CLK_DISABLE();
-  /* USER CODE BEGIN AES1_MspDeInit 1 */
-
-  /* USER CODE END AES1_MspDeInit 1 */
-  }
-  else if(crypHandle->Instance==AES2)
-  {
-  /* USER CODE BEGIN AES2_MspDeInit 0 */
-
-  /* USER CODE END AES2_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_AES2_CLK_DISABLE();
-  /* USER CODE BEGIN AES2_MspDeInit 1 */
-
-  /* USER CODE END AES2_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Src/app_freertos.c

@@ -1,185 +0,0 @@
-/* USER CODE BEGIN Header */
-/**
-  ******************************************************************************
-  * File Name          : app_freertos.c
-  * Description        : Code for freertos applications
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-/* USER CODE END Header */
-
-/* Includes ------------------------------------------------------------------*/
-#include "FreeRTOS.h"
-#include "task.h"
-#include "main.h"
-#include "cmsis_os.h"
-
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
-
-/* USER CODE END Includes */
-
-/* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
-
-/* USER CODE END PTD */
-
-/* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
-
-/* USER CODE END PD */
-
-/* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
-
-/* USER CODE END PM */
-
-/* Private variables ---------------------------------------------------------*/
-/* USER CODE BEGIN Variables */
-
-/* USER CODE END Variables */
-/* Definitions for defaultTask */
-osThreadId_t defaultTaskHandle;
-const osThreadAttr_t defaultTask_attributes = {
-  .name = "defaultTask",
-  .priority = (osPriority_t) osPriorityNormal,
-  .stack_size = 1024 * 4
-};
-/* Definitions for app_main */
-osThreadId_t app_mainHandle;
-const osThreadAttr_t app_main_attributes = {
-  .name = "app_main",
-  .priority = (osPriority_t) osPriorityLow,
-  .stack_size = 1024 * 4
-};
-
-/* Private function prototypes -----------------------------------------------*/
-/* USER CODE BEGIN FunctionPrototypes */
-
-/* USER CODE END FunctionPrototypes */
-
-void StartDefaultTask(void *argument);
-extern void app(void *argument);
-
-void MX_FREERTOS_Init(void); /* (MISRA C 2004 rule 8.1) */
-
-/* Hook prototypes */
-void configureTimerForRunTimeStats(void);
-unsigned long getRunTimeCounterValue(void);
-void vApplicationIdleHook(void);
-void vApplicationStackOverflowHook(xTaskHandle xTask, signed char *pcTaskName);
-
-/* USER CODE BEGIN 1 */
-/* Functions needed when configGENERATE_RUN_TIME_STATS is on */
-__weak void configureTimerForRunTimeStats(void)
-{
-
-}
-
-__weak unsigned long getRunTimeCounterValue(void)
-{
-return 0;
-}
-/* USER CODE END 1 */
-
-/* USER CODE BEGIN 2 */
-__weak void vApplicationIdleHook( void )
-{
-   /* vApplicationIdleHook() will only be called if configUSE_IDLE_HOOK is set
-   to 1 in FreeRTOSConfig.h. It will be called on each iteration of the idle
-   task. It is essential that code added to this hook function never attempts
-   to block in any way (for example, call xQueueReceive() with a block time
-   specified, or call vTaskDelay()). If the application makes use of the
-   vTaskDelete() API function (as this demo application does) then it is also
-   important that vApplicationIdleHook() is permitted to return to its calling
-   function, because it is the responsibility of the idle task to clean up
-   memory allocated by the kernel to any task that has since been deleted. */
-}
-/* USER CODE END 2 */
-
-/* USER CODE BEGIN 4 */
-__weak void vApplicationStackOverflowHook(xTaskHandle xTask, signed char *pcTaskName)
-{
-   /* Run time stack overflow checking is performed if
-   configCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2. This hook function is
-   called if a stack overflow is detected. */
-}
-/* USER CODE END 4 */
-
-/**
-  * @brief  FreeRTOS initialization
-  * @param  None
-  * @retval None
-  */
-void MX_FREERTOS_Init(void) {
-  /* USER CODE BEGIN Init */
-
-  /* USER CODE END Init */
-
-  /* USER CODE BEGIN RTOS_MUTEX */
-  /* add mutexes, ... */
-  /* USER CODE END RTOS_MUTEX */
-
-  /* USER CODE BEGIN RTOS_SEMAPHORES */
-  /* add semaphores, ... */
-  /* USER CODE END RTOS_SEMAPHORES */
-
-  /* USER CODE BEGIN RTOS_TIMERS */
-  /* start timers, add new ones, ... */
-  /* USER CODE END RTOS_TIMERS */
-
-  /* USER CODE BEGIN RTOS_QUEUES */
-  /* add queues, ... */
-  /* USER CODE END RTOS_QUEUES */
-
-  /* Create the thread(s) */
-  /* creation of defaultTask */
-  defaultTaskHandle = osThreadNew(StartDefaultTask, NULL, &defaultTask_attributes);
-
-  /* creation of app_main */
-  app_mainHandle = osThreadNew(app, NULL, &app_main_attributes);
-
-  /* USER CODE BEGIN RTOS_THREADS */
-  /* add threads, ... */
-  /* USER CODE END RTOS_THREADS */
-
-  /* USER CODE BEGIN RTOS_EVENTS */
-  /* add events, ... */
-  /* USER CODE END RTOS_EVENTS */
-
-}
-
-/* USER CODE BEGIN Header_StartDefaultTask */
-/**
-  * @brief  Function implementing the defaultTask thread.
-  * @param  argument: Not used
-  * @retval None
-  */
-/* USER CODE END Header_StartDefaultTask */
-void StartDefaultTask(void *argument)
-{
-  /* USER CODE BEGIN StartDefaultTask */
-  /* Infinite loop */
-  for(;;)
-  {
-    osDelay(1);
-  }
-  /* USER CODE END StartDefaultTask */
-}
-
-/* Private application code --------------------------------------------------*/
-/* USER CODE BEGIN Application */
-
-/* USER CODE END Application */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Src/comp.c

@@ -1,103 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    comp.c
-  * @brief   This file provides code for the configuration
-  *          of the COMP instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "comp.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-COMP_HandleTypeDef hcomp1;
-
-/* COMP1 init function */
-void MX_COMP1_Init(void)
-{
-
-  hcomp1.Instance = COMP1;
-  hcomp1.Init.InputMinus = COMP_INPUT_MINUS_1_4VREFINT;
-  hcomp1.Init.InputPlus = COMP_INPUT_PLUS_IO1;
-  hcomp1.Init.OutputPol = COMP_OUTPUTPOL_NONINVERTED;
-  hcomp1.Init.Hysteresis = COMP_HYSTERESIS_HIGH;
-  hcomp1.Init.BlankingSrce = COMP_BLANKINGSRC_NONE;
-  hcomp1.Init.Mode = COMP_POWERMODE_MEDIUMSPEED;
-  hcomp1.Init.WindowMode = COMP_WINDOWMODE_DISABLE;
-  hcomp1.Init.TriggerMode = COMP_TRIGGERMODE_IT_RISING_FALLING;
-  if (HAL_COMP_Init(&hcomp1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_COMP_MspInit(COMP_HandleTypeDef* compHandle)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(compHandle->Instance==COMP1)
-  {
-  /* USER CODE BEGIN COMP1_MspInit 0 */
-
-  /* USER CODE END COMP1_MspInit 0 */
-
-    __HAL_RCC_GPIOC_CLK_ENABLE();
-    /**COMP1 GPIO Configuration
-    PC5     ------> COMP1_INP
-    */
-    GPIO_InitStruct.Pin = RFID_RF_IN_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(RFID_RF_IN_GPIO_Port, &GPIO_InitStruct);
-
-    /* COMP1 interrupt Init */
-    HAL_NVIC_SetPriority(COMP_IRQn, 5, 0);
-    HAL_NVIC_EnableIRQ(COMP_IRQn);
-  /* USER CODE BEGIN COMP1_MspInit 1 */
-
-  /* USER CODE END COMP1_MspInit 1 */
-  }
-}
-
-void HAL_COMP_MspDeInit(COMP_HandleTypeDef* compHandle)
-{
-
-  if(compHandle->Instance==COMP1)
-  {
-  /* USER CODE BEGIN COMP1_MspDeInit 0 */
-
-  /* USER CODE END COMP1_MspDeInit 0 */
-
-    /**COMP1 GPIO Configuration
-    PC5     ------> COMP1_INP
-    */
-    HAL_GPIO_DeInit(RFID_RF_IN_GPIO_Port, RFID_RF_IN_Pin);
-
-    /* COMP1 interrupt Deinit */
-    HAL_NVIC_DisableIRQ(COMP_IRQn);
-  /* USER CODE BEGIN COMP1_MspDeInit 1 */
-
-  /* USER CODE END COMP1_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f3/f3-1/Src/crc.c

@@ -1,82 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    crc.c
-  * @brief   This file provides code for the configuration
-  *          of the CRC instances.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under Ultimate Liberty license
-  * SLA0044, the "License"; You may not use this file except in compliance with
-  * the License. You may obtain a copy of the License at:
-  *                             www.st.com/SLA0044
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "crc.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-CRC_HandleTypeDef hcrc;
-
-/* CRC init function */
-void MX_CRC_Init(void)
-{
-
-  hcrc.Instance = CRC;
-  hcrc.Init.DefaultPolynomialUse = DEFAULT_POLYNOMIAL_ENABLE;
-  hcrc.Init.DefaultInitValueUse = DEFAULT_INIT_VALUE_ENABLE;
-  hcrc.Init.InputDataInversionMode = CRC_INPUTDATA_INVERSION_NONE;
-  hcrc.Init.OutputDataInversionMode = CRC_OUTPUTDATA_INVERSION_DISABLE;
-  hcrc.InputDataFormat = CRC_INPUTDATA_FORMAT_BYTES;
-  if (HAL_CRC_Init(&hcrc) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
-}
-
-void HAL_CRC_MspInit(CRC_HandleTypeDef* crcHandle)
-{
-
-  if(crcHandle->Instance==CRC)
-  {
-  /* USER CODE BEGIN CRC_MspInit 0 */
-
-  /* USER CODE END CRC_MspInit 0 */
-    /* CRC clock enable */
-    __HAL_RCC_CRC_CLK_ENABLE();
-  /* USER CODE BEGIN CRC_MspInit 1 */
-
-  /* USER CODE END CRC_MspInit 1 */
-  }
-}
-
-void HAL_CRC_MspDeInit(CRC_HandleTypeDef* crcHandle)
-{
-
-  if(crcHandle->Instance==CRC)
-  {
-  /* USER CODE BEGIN CRC_MspDeInit 0 */
-
-  /* USER CODE END CRC_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_CRC_CLK_DISABLE();
-  /* USER CODE BEGIN CRC_MspDeInit 1 */
-
-  /* USER CODE END CRC_MspDeInit 1 */
-  }
-}
-
-/* USER CODE BEGIN 1 */
-
-/* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/