[FL-1311] F6, app LF-RFID: Updated timer api and config (#465)

* F6, app LF-RFID: Updated timer api and config
* Api hal rfid: updated comments

Co-authored-by: あく <alleteam@gmail.com>

applications/lf-rfid/helpers/rfid-timer-emulator.cpp

@@ -64,7 +64,7 @@ void RfidTimerEmulator::timer_update_callback(void* _hw, void* ctx) {
     RfidTimerEmulator* _this = static_cast<RfidTimerEmulator*>(ctx);
     TIM_HandleTypeDef* hw = static_cast<TIM_HandleTypeDef*>(_hw);
 
-    if(hw == &LFRFID_TIM) {
+    if(api_hal_rfid_is_tim_emulate(hw)) {
         bool result;
         bool polarity;
         uint16_t period;
@@ -77,7 +77,7 @@ void RfidTimerEmulator::timer_update_callback(void* _hw, void* ctx) {
 
         _this->pulse_joiner.pop_pulse(&period, &pulse);
 
-        hw->Instance->ARR = period - 1;
-        hw->Instance->CCR1 = pulse;
+        api_hal_rfid_set_emulate_period(period - 1);
+        api_hal_rfid_set_emulate_pulse(pulse);
     }
 }

firmware/targets/api-hal-include/api-hal-rfid.h

@@ -1,5 +1,7 @@
 #pragma once
 #include <stdint.h>
+#include <stdbool.h>
+#include <main.h>
 
 #ifdef __cplusplus
 extern "C" {
@@ -68,6 +70,27 @@ void api_hal_rfid_tim_emulate_stop();
  */
 void api_hal_rfid_tim_reset();
 
+/**
+ * @brief check that timer instance is emulation timer
+ * 
+ * @param hw timer instance
+ */
+bool api_hal_rfid_is_tim_emulate(TIM_HandleTypeDef* hw);
+
+/**
+ * @brief set emulation timer period
+ * 
+ * @param period overall duration
+ */
+void api_hal_rfid_set_emulate_period(uint32_t period);
+
+/**
+ * @brief set emulation timer pulse
+ * 
+ * @param pulse duration of high level
+ */
+void api_hal_rfid_set_emulate_pulse(uint32_t pulse);
+
 #ifdef __cplusplus
 }
 #endif

firmware/targets/f5/api-hal/api-hal-rfid.c

@@ -2,6 +2,11 @@
 #include <api-hal-ibutton.h>
 #include <api-hal-resources.h>
 
+#define LFRFID_READ_TIM htim1
+#define LFRFID_READ_CHANNEL TIM_CHANNEL_1
+#define LFRFID_EMULATE_TIM htim1
+#define LFRFID_EMULATE_CHANNEL TIM_CHANNEL_1
+
 void api_hal_rfid_pins_reset() {
     // ibutton bus disable
     api_hal_ibutton_stop();
@@ -60,21 +65,20 @@ void api_hal_rfid_tim_read(float freq, float duty_cycle) {
     TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
 
     // basic PWM setup with needed freq and internal clock
-    LFRFID_TIM.Instance = TIM1;
-    LFRFID_TIM.Init.Prescaler = 0;
-    LFRFID_TIM.Init.CounterMode = TIM_COUNTERMODE_UP;
-    LFRFID_TIM.Init.Period = period;
-    LFRFID_TIM.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-    LFRFID_TIM.Init.RepetitionCounter = 0;
-    LFRFID_TIM.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-    if(HAL_TIM_Base_Init(&LFRFID_TIM) != HAL_OK) {
+    LFRFID_READ_TIM.Init.Prescaler = 0;
+    LFRFID_READ_TIM.Init.CounterMode = TIM_COUNTERMODE_UP;
+    LFRFID_READ_TIM.Init.Period = period;
+    LFRFID_READ_TIM.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+    LFRFID_READ_TIM.Init.RepetitionCounter = 0;
+    LFRFID_READ_TIM.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+    if(HAL_TIM_Base_Init(&LFRFID_READ_TIM) != HAL_OK) {
         Error_Handler();
     }
     sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
-    if(HAL_TIM_ConfigClockSource(&LFRFID_TIM, &sClockSourceConfig) != HAL_OK) {
+    if(HAL_TIM_ConfigClockSource(&LFRFID_READ_TIM, &sClockSourceConfig) != HAL_OK) {
         Error_Handler();
     }
-    if(HAL_TIM_PWM_Init(&LFRFID_TIM) != HAL_OK) {
+    if(HAL_TIM_PWM_Init(&LFRFID_READ_TIM) != HAL_OK) {
         Error_Handler();
     }
 
@@ -82,19 +86,19 @@ void api_hal_rfid_tim_read(float freq, float duty_cycle) {
     sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
     sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
     sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-    if(HAL_TIMEx_MasterConfigSynchronization(&LFRFID_TIM, &sMasterConfig) != HAL_OK) {
+    if(HAL_TIMEx_MasterConfigSynchronization(&LFRFID_READ_TIM, &sMasterConfig) != HAL_OK) {
         Error_Handler();
     }
 
     // pwm config
     sConfigOC.OCMode = TIM_OCMODE_PWM1;
-    sConfigOC.Pulse = (uint32_t)(LFRFID_TIM.Init.Period * duty_cycle);
+    sConfigOC.Pulse = (uint32_t)(LFRFID_READ_TIM.Init.Period * duty_cycle);
     sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
     sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
     sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
     sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
     sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-    if(HAL_TIM_OC_ConfigChannel(&LFRFID_TIM, &sConfigOC, LFRFID_CH) != HAL_OK) {
+    if(HAL_TIM_OC_ConfigChannel(&LFRFID_READ_TIM, &sConfigOC, LFRFID_READ_CHANNEL) != HAL_OK) {
         Error_Handler();
     }
 
@@ -112,17 +116,17 @@ void api_hal_rfid_tim_read(float freq, float duty_cycle) {
     sBreakDeadTimeConfig.Break2Filter = 0;
     sBreakDeadTimeConfig.Break2AFMode = TIM_BREAK_AFMODE_INPUT;
     sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
-    if(HAL_TIMEx_ConfigBreakDeadTime(&LFRFID_TIM, &sBreakDeadTimeConfig) != HAL_OK) {
+    if(HAL_TIMEx_ConfigBreakDeadTime(&LFRFID_READ_TIM, &sBreakDeadTimeConfig) != HAL_OK) {
         Error_Handler();
     }
 }
 
 void api_hal_rfid_tim_read_start() {
-    HAL_TIMEx_PWMN_Start(&LFRFID_TIM, LFRFID_CH);
+    HAL_TIMEx_PWMN_Start(&LFRFID_READ_TIM, LFRFID_READ_CHANNEL);
 }
 
 void api_hal_rfid_tim_read_stop() {
-    HAL_TIMEx_PWMN_Stop(&LFRFID_TIM, LFRFID_CH);
+    HAL_TIMEx_PWMN_Stop(&LFRFID_READ_TIM, LFRFID_READ_CHANNEL);
 }
 
 void api_hal_rfid_tim_emulate(float freq) {
@@ -135,21 +139,20 @@ void api_hal_rfid_tim_emulate(float freq) {
     TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
 
     // basic PWM setup with needed freq and internal clock
-    LFRFID_TIM.Instance = TIM1;
-    LFRFID_TIM.Init.Prescaler = prescaler;
-    LFRFID_TIM.Init.CounterMode = TIM_COUNTERMODE_UP;
-    LFRFID_TIM.Init.Period = 1;
-    LFRFID_TIM.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-    LFRFID_TIM.Init.RepetitionCounter = 0;
-    LFRFID_TIM.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
-    if(HAL_TIM_Base_Init(&LFRFID_TIM) != HAL_OK) {
+    LFRFID_EMULATE_TIM.Init.Prescaler = prescaler;
+    LFRFID_EMULATE_TIM.Init.CounterMode = TIM_COUNTERMODE_UP;
+    LFRFID_EMULATE_TIM.Init.Period = 1;
+    LFRFID_EMULATE_TIM.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+    LFRFID_EMULATE_TIM.Init.RepetitionCounter = 0;
+    LFRFID_EMULATE_TIM.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
+    if(HAL_TIM_Base_Init(&LFRFID_EMULATE_TIM) != HAL_OK) {
         Error_Handler();
     }
     sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
-    if(HAL_TIM_ConfigClockSource(&LFRFID_TIM, &sClockSourceConfig) != HAL_OK) {
+    if(HAL_TIM_ConfigClockSource(&LFRFID_EMULATE_TIM, &sClockSourceConfig) != HAL_OK) {
         Error_Handler();
     }
-    if(HAL_TIM_PWM_Init(&LFRFID_TIM) != HAL_OK) {
+    if(HAL_TIM_PWM_Init(&LFRFID_EMULATE_TIM) != HAL_OK) {
         Error_Handler();
     }
 
@@ -157,7 +160,7 @@ void api_hal_rfid_tim_emulate(float freq) {
     sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
     sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
     sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-    if(HAL_TIMEx_MasterConfigSynchronization(&LFRFID_TIM, &sMasterConfig) != HAL_OK) {
+    if(HAL_TIMEx_MasterConfigSynchronization(&LFRFID_EMULATE_TIM, &sMasterConfig) != HAL_OK) {
         Error_Handler();
     }
 
@@ -169,7 +172,8 @@ void api_hal_rfid_tim_emulate(float freq) {
     sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
     sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
     sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-    if(HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, LFRFID_CH) != HAL_OK) {
+    if(HAL_TIM_PWM_ConfigChannel(&LFRFID_EMULATE_TIM, &sConfigOC, LFRFID_EMULATE_CHANNEL) !=
+       HAL_OK) {
         Error_Handler();
     }
 
@@ -187,20 +191,48 @@ void api_hal_rfid_tim_emulate(float freq) {
     sBreakDeadTimeConfig.Break2Filter = 0;
     sBreakDeadTimeConfig.Break2AFMode = TIM_BREAK_AFMODE_INPUT;
     sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
-    if(HAL_TIMEx_ConfigBreakDeadTime(&LFRFID_TIM, &sBreakDeadTimeConfig) != HAL_OK) {
+    if(HAL_TIMEx_ConfigBreakDeadTime(&LFRFID_EMULATE_TIM, &sBreakDeadTimeConfig) != HAL_OK) {
         Error_Handler();
     }
 }
 
 void api_hal_rfid_tim_emulate_start() {
-    HAL_TIM_PWM_Start_IT(&LFRFID_TIM, LFRFID_CH);
-    HAL_TIM_Base_Start_IT(&LFRFID_TIM);
+    HAL_TIM_PWM_Start_IT(&LFRFID_EMULATE_TIM, LFRFID_EMULATE_CHANNEL);
+    HAL_TIM_Base_Start_IT(&LFRFID_EMULATE_TIM);
 }
 
 void api_hal_rfid_tim_emulate_stop() {
-    HAL_TIM_Base_Stop(&LFRFID_TIM);
-    HAL_TIM_PWM_Stop(&LFRFID_TIM, LFRFID_CH);
+    HAL_TIM_Base_Stop(&LFRFID_EMULATE_TIM);
+    HAL_TIM_PWM_Stop(&LFRFID_EMULATE_TIM, LFRFID_EMULATE_CHANNEL);
 }
 
 void api_hal_rfid_tim_reset() {
+}
+
+bool api_hal_rfid_is_tim_emulate(TIM_HandleTypeDef* hw) {
+    return (hw == &LFRFID_EMULATE_TIM);
+}
+
+void api_hal_rfid_set_emulate_period(uint32_t period) {
+    LFRFID_EMULATE_TIM.Instance->ARR = period;
+}
+
+void api_hal_rfid_set_emulate_pulse(uint32_t pulse) {
+    switch(LFRFID_EMULATE_CHANNEL) {
+    case TIM_CHANNEL_1:
+        LFRFID_EMULATE_TIM.Instance->CCR1 = pulse;
+        break;
+    case TIM_CHANNEL_2:
+        LFRFID_EMULATE_TIM.Instance->CCR2 = pulse;
+        break;
+    case TIM_CHANNEL_3:
+        LFRFID_EMULATE_TIM.Instance->CCR3 = pulse;
+        break;
+    case TIM_CHANNEL_4:
+        LFRFID_EMULATE_TIM.Instance->CCR4 = pulse;
+        break;
+    default:
+        furi_check(0);
+        break;
+    }
 }

firmware/targets/f6/api-hal/api-hal-rfid.c

@@ -2,6 +2,11 @@
 #include <api-hal-ibutton.h>
 #include <api-hal-resources.h>
 
+#define LFRFID_READ_TIM htim1
+#define LFRFID_READ_CHANNEL TIM_CHANNEL_1
+#define LFRFID_EMULATE_TIM htim2
+#define LFRFID_EMULATE_CHANNEL TIM_CHANNEL_3
+
 void api_hal_rfid_pins_reset() {
     // ibutton bus disable
     api_hal_ibutton_stop();
@@ -56,21 +61,20 @@ void api_hal_rfid_tim_read(float freq, float duty_cycle) {
     TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
 
     // basic PWM setup with needed freq and internal clock
-    LFRFID_TIM.Instance = TIM1;
-    LFRFID_TIM.Init.Prescaler = 0;
-    LFRFID_TIM.Init.CounterMode = TIM_COUNTERMODE_UP;
-    LFRFID_TIM.Init.Period = period;
-    LFRFID_TIM.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-    LFRFID_TIM.Init.RepetitionCounter = 0;
-    LFRFID_TIM.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
-    if(HAL_TIM_Base_Init(&LFRFID_TIM) != HAL_OK) {
+    LFRFID_READ_TIM.Init.Prescaler = 0;
+    LFRFID_READ_TIM.Init.CounterMode = TIM_COUNTERMODE_UP;
+    LFRFID_READ_TIM.Init.Period = period;
+    LFRFID_READ_TIM.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+    LFRFID_READ_TIM.Init.RepetitionCounter = 0;
+    LFRFID_READ_TIM.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+    if(HAL_TIM_Base_Init(&LFRFID_READ_TIM) != HAL_OK) {
         Error_Handler();
     }
     sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
-    if(HAL_TIM_ConfigClockSource(&LFRFID_TIM, &sClockSourceConfig) != HAL_OK) {
+    if(HAL_TIM_ConfigClockSource(&LFRFID_READ_TIM, &sClockSourceConfig) != HAL_OK) {
         Error_Handler();
     }
-    if(HAL_TIM_PWM_Init(&LFRFID_TIM) != HAL_OK) {
+    if(HAL_TIM_PWM_Init(&LFRFID_READ_TIM) != HAL_OK) {
         Error_Handler();
     }
 
@@ -78,19 +82,19 @@ void api_hal_rfid_tim_read(float freq, float duty_cycle) {
     sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
     sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
     sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-    if(HAL_TIMEx_MasterConfigSynchronization(&LFRFID_TIM, &sMasterConfig) != HAL_OK) {
+    if(HAL_TIMEx_MasterConfigSynchronization(&LFRFID_READ_TIM, &sMasterConfig) != HAL_OK) {
         Error_Handler();
     }
 
     // pwm config
     sConfigOC.OCMode = TIM_OCMODE_PWM1;
-    sConfigOC.Pulse = (uint32_t)(LFRFID_TIM.Init.Period * duty_cycle);
+    sConfigOC.Pulse = (uint32_t)(LFRFID_READ_TIM.Init.Period * duty_cycle);
     sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
     sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
     sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
     sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
     sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-    if(HAL_TIM_OC_ConfigChannel(&LFRFID_TIM, &sConfigOC, LFRFID_CH) != HAL_OK) {
+    if(HAL_TIM_OC_ConfigChannel(&LFRFID_READ_TIM, &sConfigOC, LFRFID_READ_CHANNEL) != HAL_OK) {
         Error_Handler();
     }
 
@@ -108,17 +112,17 @@ void api_hal_rfid_tim_read(float freq, float duty_cycle) {
     sBreakDeadTimeConfig.Break2Filter = 0;
     sBreakDeadTimeConfig.Break2AFMode = TIM_BREAK_AFMODE_INPUT;
     sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
-    if(HAL_TIMEx_ConfigBreakDeadTime(&LFRFID_TIM, &sBreakDeadTimeConfig) != HAL_OK) {
+    if(HAL_TIMEx_ConfigBreakDeadTime(&LFRFID_READ_TIM, &sBreakDeadTimeConfig) != HAL_OK) {
         Error_Handler();
     }
 }
 
 void api_hal_rfid_tim_read_start() {
-    HAL_TIMEx_PWMN_Start(&LFRFID_TIM, LFRFID_CH);
+    HAL_TIMEx_PWMN_Start(&LFRFID_READ_TIM, LFRFID_READ_CHANNEL);
 }
 
 void api_hal_rfid_tim_read_stop() {
-    HAL_TIMEx_PWMN_Stop(&LFRFID_TIM, LFRFID_CH);
+    HAL_TIMEx_PWMN_Stop(&LFRFID_READ_TIM, LFRFID_READ_CHANNEL);
 }
 
 void api_hal_rfid_tim_emulate(float freq) {
@@ -131,21 +135,20 @@ void api_hal_rfid_tim_emulate(float freq) {
     TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
 
     // basic PWM setup with needed freq and internal clock
-    LFRFID_TIM.Instance = TIM1;
-    LFRFID_TIM.Init.Prescaler = prescaler;
-    LFRFID_TIM.Init.CounterMode = TIM_COUNTERMODE_UP;
-    LFRFID_TIM.Init.Period = 1;
-    LFRFID_TIM.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
-    LFRFID_TIM.Init.RepetitionCounter = 0;
-    LFRFID_TIM.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
-    if(HAL_TIM_Base_Init(&LFRFID_TIM) != HAL_OK) {
+    LFRFID_EMULATE_TIM.Init.Prescaler = prescaler;
+    LFRFID_EMULATE_TIM.Init.CounterMode = TIM_COUNTERMODE_UP;
+    LFRFID_EMULATE_TIM.Init.Period = 1;
+    LFRFID_EMULATE_TIM.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+    LFRFID_EMULATE_TIM.Init.RepetitionCounter = 0;
+    LFRFID_EMULATE_TIM.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
+    if(HAL_TIM_Base_Init(&LFRFID_EMULATE_TIM) != HAL_OK) {
         Error_Handler();
     }
     sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
-    if(HAL_TIM_ConfigClockSource(&LFRFID_TIM, &sClockSourceConfig) != HAL_OK) {
+    if(HAL_TIM_ConfigClockSource(&LFRFID_EMULATE_TIM, &sClockSourceConfig) != HAL_OK) {
         Error_Handler();
     }
-    if(HAL_TIM_PWM_Init(&LFRFID_TIM) != HAL_OK) {
+    if(HAL_TIM_PWM_Init(&LFRFID_EMULATE_TIM) != HAL_OK) {
         Error_Handler();
     }
 
@@ -153,7 +156,7 @@ void api_hal_rfid_tim_emulate(float freq) {
     sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
     sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
     sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
-    if(HAL_TIMEx_MasterConfigSynchronization(&LFRFID_TIM, &sMasterConfig) != HAL_OK) {
+    if(HAL_TIMEx_MasterConfigSynchronization(&LFRFID_EMULATE_TIM, &sMasterConfig) != HAL_OK) {
         Error_Handler();
     }
 
@@ -165,7 +168,8 @@ void api_hal_rfid_tim_emulate(float freq) {
     sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
     sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
     sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
-    if(HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, LFRFID_CH) != HAL_OK) {
+    if(HAL_TIM_PWM_ConfigChannel(&LFRFID_EMULATE_TIM, &sConfigOC, LFRFID_EMULATE_CHANNEL) !=
+       HAL_OK) {
         Error_Handler();
     }
 
@@ -183,20 +187,48 @@ void api_hal_rfid_tim_emulate(float freq) {
     sBreakDeadTimeConfig.Break2Filter = 0;
     sBreakDeadTimeConfig.Break2AFMode = TIM_BREAK_AFMODE_INPUT;
     sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
-    if(HAL_TIMEx_ConfigBreakDeadTime(&LFRFID_TIM, &sBreakDeadTimeConfig) != HAL_OK) {
+    if(HAL_TIMEx_ConfigBreakDeadTime(&LFRFID_EMULATE_TIM, &sBreakDeadTimeConfig) != HAL_OK) {
         Error_Handler();
     }
 }
 
 void api_hal_rfid_tim_emulate_start() {
-    HAL_TIM_PWM_Start_IT(&LFRFID_TIM, LFRFID_CH);
-    HAL_TIM_Base_Start_IT(&LFRFID_TIM);
+    HAL_TIM_PWM_Start_IT(&LFRFID_EMULATE_TIM, LFRFID_EMULATE_CHANNEL);
+    HAL_TIM_Base_Start_IT(&LFRFID_EMULATE_TIM);
 }
 
 void api_hal_rfid_tim_emulate_stop() {
-    HAL_TIM_Base_Stop(&LFRFID_TIM);
-    HAL_TIM_PWM_Stop(&LFRFID_TIM, LFRFID_CH);
+    HAL_TIM_Base_Stop(&LFRFID_EMULATE_TIM);
+    HAL_TIM_PWM_Stop(&LFRFID_EMULATE_TIM, LFRFID_EMULATE_CHANNEL);
 }
 
 void api_hal_rfid_tim_reset() {
+}
+
+bool api_hal_rfid_is_tim_emulate(TIM_HandleTypeDef* hw) {
+    return (hw == &LFRFID_EMULATE_TIM);
+}
+
+void api_hal_rfid_set_emulate_period(uint32_t period) {
+    LFRFID_EMULATE_TIM.Instance->ARR = period;
+}
+
+void api_hal_rfid_set_emulate_pulse(uint32_t pulse) {
+    switch(LFRFID_EMULATE_CHANNEL) {
+    case TIM_CHANNEL_1:
+        LFRFID_EMULATE_TIM.Instance->CCR1 = pulse;
+        break;
+    case TIM_CHANNEL_2:
+        LFRFID_EMULATE_TIM.Instance->CCR2 = pulse;
+        break;
+    case TIM_CHANNEL_3:
+        LFRFID_EMULATE_TIM.Instance->CCR3 = pulse;
+        break;
+    case TIM_CHANNEL_4:
+        LFRFID_EMULATE_TIM.Instance->CCR4 = pulse;
+        break;
+    default:
+        furi_check(0);
+        break;
+    }
 }