Update stm32l0xx_hal_conf.h everywhere

examples/blinky/stm32l0xx_hal_conf.h

@@ -41,6 +41,7 @@
 // #define HAL_CRYP_MODULE_ENABLED  
 // #define HAL_DAC_MODULE_ENABLED   
 #define HAL_DMA_MODULE_ENABLED
+// #define HAL_EXTI_MODULE_ENABLED
 // #define HAL_FIREWALL_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
@@ -72,11 +73,11 @@
   *        (when HSE is used as system clock source, directly or through the PLL).  
   */
 #if !defined  (HSE_VALUE) 
-  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+  #define HSE_VALUE    (8000000U)         /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
@@ -84,7 +85,7 @@
   *        This value is the default MSI range value after Reset.
   */
 #if !defined  (MSI_VALUE)
-  #define MSI_VALUE    ((uint32_t)2097152U) /*!< Value of the Internal oscillator in Hz*/
+  #define MSI_VALUE    (2097152U)         /*!< Value of the Internal oscillator in Hz*/
 #endif /* MSI_VALUE */
 
 /**
@@ -93,14 +94,14 @@
   *        (when HSI is used as system clock source, directly or through the PLL). 
   */
 #if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+  #define HSI_VALUE    (16000000U)        /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
 /**
   * @brief Internal High Speed oscillator for USB (HSI48) value.
   */
 #if !defined  (HSI48_VALUE) 
-#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+#define HSI48_VALUE (48000000U)           /*!< Value of the Internal High Speed oscillator for USB in Hz.
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 #endif /* HSI48_VALUE */
@@ -109,7 +110,7 @@
   * @brief Internal Low Speed oscillator (LSI) value.
   */
 #if !defined  (LSI_VALUE) 
- #define LSI_VALUE  ((uint32_t)37000U)       /*!< LSI Typical Value in Hz*/
+ #define LSI_VALUE  (37000U)                 /*!< LSI Typical Value in Hz*/
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
                                              The real value may vary depending on the variations
                                              in voltage and temperature.*/
@@ -118,14 +119,14 @@
   *        This value is used by the UART, RTC HAL module to compute the system frequency
   */
 #if !defined  (LSE_VALUE)
-  #define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+  #define LSE_VALUE    (32768U)             /*!< Value of the External oscillator in Hz*/
 #endif /* LSE_VALUE */
 
 /**
   * @brief Time out for LSE start up value in ms.
   */
 #if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+  #define LSE_STARTUP_TIMEOUT    (5000U)    /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
    
@@ -136,8 +137,8 @@
 /**
   * @brief This is the HAL system configuration section
   */     
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U)    /*!< tick interrupt priority */            
+#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((1U<<__NVIC_PRIO_BITS) - 1U)    /*!< tick interrupt priority */            
 #define  USE_RTOS                     0U     
 #define  PREFETCH_ENABLE              1U              
 #define  PREREAD_ENABLE               0U
@@ -206,6 +207,10 @@
   #include "stm32l0xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32l0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_CORTEX_MODULE_ENABLED
   #include "stm32l0xx_hal_cortex.h"
 #endif /* HAL_CORTEX_MODULE_ENABLED */
@@ -335,4 +340,3 @@
  
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-

tests/bsp/stm32l0xx_hal_conf.h

@@ -41,6 +41,7 @@
 #define HAL_CRYP_MODULE_ENABLED  
 #define HAL_DAC_MODULE_ENABLED   
 #define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
 #define HAL_FIREWALL_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
@@ -72,11 +73,11 @@
   *        (when HSE is used as system clock source, directly or through the PLL).  
   */
 #if !defined  (HSE_VALUE) 
-  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+  #define HSE_VALUE    (8000000U)         /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
@@ -84,7 +85,7 @@
   *        This value is the default MSI range value after Reset.
   */
 #if !defined  (MSI_VALUE)
-  #define MSI_VALUE    ((uint32_t)2097152U) /*!< Value of the Internal oscillator in Hz*/
+  #define MSI_VALUE    (2097152U)         /*!< Value of the Internal oscillator in Hz*/
 #endif /* MSI_VALUE */
 
 /**
@@ -93,14 +94,14 @@
   *        (when HSI is used as system clock source, directly or through the PLL). 
   */
 #if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+  #define HSI_VALUE    (16000000U)        /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
 /**
   * @brief Internal High Speed oscillator for USB (HSI48) value.
   */
 #if !defined  (HSI48_VALUE) 
-#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+#define HSI48_VALUE (48000000U)           /*!< Value of the Internal High Speed oscillator for USB in Hz.
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 #endif /* HSI48_VALUE */
@@ -109,7 +110,7 @@
   * @brief Internal Low Speed oscillator (LSI) value.
   */
 #if !defined  (LSI_VALUE) 
- #define LSI_VALUE  ((uint32_t)37000U)       /*!< LSI Typical Value in Hz*/
+ #define LSI_VALUE  (37000U)                 /*!< LSI Typical Value in Hz*/
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
                                              The real value may vary depending on the variations
                                              in voltage and temperature.*/
@@ -118,14 +119,14 @@
   *        This value is used by the UART, RTC HAL module to compute the system frequency
   */
 #if !defined  (LSE_VALUE)
-  #define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+  #define LSE_VALUE    (32768U)             /*!< Value of the External oscillator in Hz*/
 #endif /* LSE_VALUE */
 
 /**
   * @brief Time out for LSE start up value in ms.
   */
 #if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+  #define LSE_STARTUP_TIMEOUT    (5000U)    /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
    
@@ -136,8 +137,8 @@
 /**
   * @brief This is the HAL system configuration section
   */     
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U)    /*!< tick interrupt priority */            
+#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((1U<<__NVIC_PRIO_BITS) - 1U)    /*!< tick interrupt priority */            
 #define  USE_RTOS                     0U     
 #define  PREFETCH_ENABLE              1U              
 #define  PREREAD_ENABLE               0U
@@ -206,6 +207,10 @@
   #include "stm32l0xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32l0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_CORTEX_MODULE_ENABLED
   #include "stm32l0xx_hal_cortex.h"
 #endif /* HAL_CORTEX_MODULE_ENABLED */
@@ -335,4 +340,3 @@
  
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-

tests/fetch/stm32l0xx_hal_conf.h

@@ -41,6 +41,7 @@
 #define HAL_CRYP_MODULE_ENABLED  
 #define HAL_DAC_MODULE_ENABLED   
 #define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
 #define HAL_FIREWALL_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
@@ -72,11 +73,11 @@
   *        (when HSE is used as system clock source, directly or through the PLL).  
   */
 #if !defined  (HSE_VALUE) 
-  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+  #define HSE_VALUE    (8000000U)         /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
@@ -84,7 +85,7 @@
   *        This value is the default MSI range value after Reset.
   */
 #if !defined  (MSI_VALUE)
-  #define MSI_VALUE    ((uint32_t)2097152U) /*!< Value of the Internal oscillator in Hz*/
+  #define MSI_VALUE    (2097152U)         /*!< Value of the Internal oscillator in Hz*/
 #endif /* MSI_VALUE */
 
 /**
@@ -93,14 +94,14 @@
   *        (when HSI is used as system clock source, directly or through the PLL). 
   */
 #if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+  #define HSI_VALUE    (16000000U)        /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
 /**
   * @brief Internal High Speed oscillator for USB (HSI48) value.
   */
 #if !defined  (HSI48_VALUE) 
-#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+#define HSI48_VALUE (48000000U)           /*!< Value of the Internal High Speed oscillator for USB in Hz.
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 #endif /* HSI48_VALUE */
@@ -109,7 +110,7 @@
   * @brief Internal Low Speed oscillator (LSI) value.
   */
 #if !defined  (LSI_VALUE) 
- #define LSI_VALUE  ((uint32_t)37000U)       /*!< LSI Typical Value in Hz*/
+ #define LSI_VALUE  (37000U)                 /*!< LSI Typical Value in Hz*/
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
                                              The real value may vary depending on the variations
                                              in voltage and temperature.*/
@@ -118,14 +119,14 @@
   *        This value is used by the UART, RTC HAL module to compute the system frequency
   */
 #if !defined  (LSE_VALUE)
-  #define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+  #define LSE_VALUE    (32768U)             /*!< Value of the External oscillator in Hz*/
 #endif /* LSE_VALUE */
 
 /**
   * @brief Time out for LSE start up value in ms.
   */
 #if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+  #define LSE_STARTUP_TIMEOUT    (5000U)    /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
    
@@ -136,8 +137,8 @@
 /**
   * @brief This is the HAL system configuration section
   */     
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U)    /*!< tick interrupt priority */            
+#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((1U<<__NVIC_PRIO_BITS) - 1U)    /*!< tick interrupt priority */            
 #define  USE_RTOS                     0U     
 #define  PREFETCH_ENABLE              1U              
 #define  PREREAD_ENABLE               0U
@@ -206,6 +207,10 @@
   #include "stm32l0xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32l0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_CORTEX_MODULE_ENABLED
   #include "stm32l0xx_hal_cortex.h"
 #endif /* HAL_CORTEX_MODULE_ENABLED */
@@ -335,4 +340,3 @@
  
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-

tests/hal/stm32l0xx_hal_conf.h

@@ -41,6 +41,7 @@
 #define HAL_CRYP_MODULE_ENABLED  
 #define HAL_DAC_MODULE_ENABLED   
 #define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
 #define HAL_FIREWALL_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
@@ -72,11 +73,11 @@
   *        (when HSE is used as system clock source, directly or through the PLL).  
   */
 #if !defined  (HSE_VALUE) 
-  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+  #define HSE_VALUE    (8000000U)         /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
@@ -84,7 +85,7 @@
   *        This value is the default MSI range value after Reset.
   */
 #if !defined  (MSI_VALUE)
-  #define MSI_VALUE    ((uint32_t)2097152U) /*!< Value of the Internal oscillator in Hz*/
+  #define MSI_VALUE    (2097152U)         /*!< Value of the Internal oscillator in Hz*/
 #endif /* MSI_VALUE */
 
 /**
@@ -93,14 +94,14 @@
   *        (when HSI is used as system clock source, directly or through the PLL). 
   */
 #if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+  #define HSI_VALUE    (16000000U)        /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
 /**
   * @brief Internal High Speed oscillator for USB (HSI48) value.
   */
 #if !defined  (HSI48_VALUE) 
-#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+#define HSI48_VALUE (48000000U)           /*!< Value of the Internal High Speed oscillator for USB in Hz.
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 #endif /* HSI48_VALUE */
@@ -109,7 +110,7 @@
   * @brief Internal Low Speed oscillator (LSI) value.
   */
 #if !defined  (LSI_VALUE) 
- #define LSI_VALUE  ((uint32_t)37000U)       /*!< LSI Typical Value in Hz*/
+ #define LSI_VALUE  (37000U)                 /*!< LSI Typical Value in Hz*/
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
                                              The real value may vary depending on the variations
                                              in voltage and temperature.*/
@@ -118,14 +119,14 @@
   *        This value is used by the UART, RTC HAL module to compute the system frequency
   */
 #if !defined  (LSE_VALUE)
-  #define LSE_VALUE    ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
+  #define LSE_VALUE    (32768U)             /*!< Value of the External oscillator in Hz*/
 #endif /* LSE_VALUE */
 
 /**
   * @brief Time out for LSE start up value in ms.
   */
 #if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+  #define LSE_STARTUP_TIMEOUT    (5000U)    /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
    
@@ -136,8 +137,8 @@
 /**
   * @brief This is the HAL system configuration section
   */     
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U)    /*!< tick interrupt priority */            
+#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((1U<<__NVIC_PRIO_BITS) - 1U)    /*!< tick interrupt priority */            
 #define  USE_RTOS                     0U     
 #define  PREFETCH_ENABLE              1U              
 #define  PREREAD_ENABLE               0U
@@ -206,6 +207,10 @@
   #include "stm32l0xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32l0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_CORTEX_MODULE_ENABLED
   #include "stm32l0xx_hal_cortex.h"
 #endif /* HAL_CORTEX_MODULE_ENABLED */
@@ -335,4 +340,3 @@
  
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-