Merge pull request #331 from xanthio/feature/stm32C0-MCU-support

Add STM32C0 support

.github/workflows/cmake.yml

@@ -11,7 +11,7 @@ jobs:
     runs-on: ubuntu-20.04
     strategy:
       matrix:
-        family: [F0, F1, F2, F3, F4, F7, G0, G4, H7, L0, L1, L4, L5, U5, WB, WL, MP1]
+        family: [C0, F0, F1, F2, F3, F4, F7, G0, G4, H7, L0, L1, L4, L5, U5, WB, WL, MP1]
       fail-fast: false
 
     steps:

cmake/FindBSP.cmake

@@ -300,7 +300,7 @@ foreach(COMP ${BSP_FIND_COMPONENTS})
     string(TOLOWER ${COMP} COMP_L)
     string(TOUPPER ${COMP} COMP_U)
     
-    string(REGEX MATCH "^STM32([FGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP_U ${COMP_U})
+    string(REGEX MATCH "^STM32([CFGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP_U ${COMP_U})
     if(NOT CMAKE_MATCH_1)
         message(FATAL_ERROR "Unknown BSP component: ${COMP}")
     endif()

cmake/FindCMSIS.cmake

@@ -43,7 +43,7 @@ foreach(COMP ${CMSIS_FIND_COMPONENTS})
     endif()
 
     # Component is not RTOS component, so check whether it is a family component
-    string(REGEX MATCH "^STM32([FGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP ${COMP})
+    string(REGEX MATCH "^STM32([CFGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP ${COMP})
     if(CMAKE_MATCH_1)
         list(APPEND CMSIS_FIND_COMPONENTS_FAMILIES ${COMP})
     endif()
@@ -113,7 +113,7 @@ foreach(COMP ${CMSIS_FIND_COMPONENTS_FAMILIES})
     string(TOLOWER ${COMP} COMP_L)
     string(TOUPPER ${COMP} COMP)
     
-    string(REGEX MATCH "^STM32([FGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP ${COMP})
+    string(REGEX MATCH "^STM32([CFGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP ${COMP})
     # CMAKE_MATCH_<n> contains n'th subexpression
     # CMAKE_MATCH_0 contains full match
 

cmake/FindFreeRTOS.cmake

@@ -44,7 +44,7 @@ endif()
 # This section fills the family and ports components list
 foreach(COMP ${FreeRTOS_FIND_COMPONENTS})
     string(TOUPPER ${COMP} COMP)
-    string(REGEX MATCH "^STM32([FGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" FAMILY_COMP ${COMP})
+    string(REGEX MATCH "^STM32([CFGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" FAMILY_COMP ${COMP})
     # Valid family component, so add it (e.g. STM32H7)
     if(CMAKE_MATCH_1)
         list(APPEND FreeRTOS_FIND_COMPONENTS_FAMILIES ${FAMILY_COMP})
@@ -207,7 +207,7 @@ else()
         string(TOLOWER ${COMP} COMP_L)
         string(TOUPPER ${COMP} COMP)
         
-        string(REGEX MATCH "^STM32([FGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP ${COMP})
+        string(REGEX MATCH "^STM32([CFGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP ${COMP})
         
         if((NOT CMAKE_MATCH_1) AND (NOT CMAKE_MATCH_2))
             message(FATAL_ERROR "Unknown FreeRTOS component: ${COMP}")

cmake/FindHAL.cmake

@@ -42,7 +42,7 @@ endfunction()
 # Step 1 : Checking all the requested families
 foreach(COMP ${HAL_FIND_COMPONENTS})
     string(TOUPPER ${COMP} COMP_U)
-    string(REGEX MATCH "^STM32([FGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP_U ${COMP_U})
+    string(REGEX MATCH "^STM32([CFGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP_U ${COMP_U})
     if(CMAKE_MATCH_1) #Matches the family part of the provided STM32<FAMILY>[..] component
         list(APPEND HAL_FIND_COMPONENTS_FAMILIES ${COMP})
         message(TRACE "FindHAL: append COMP ${COMP} to HAL_FIND_COMPONENTS_FAMILIES")
@@ -59,7 +59,7 @@ endif()
 # Step 2 : Generating all the valid drivers from requested families
 foreach(family_comp ${HAL_FIND_COMPONENTS_FAMILIES})
     string(TOUPPER ${family_comp} family_comp)
-    string(REGEX MATCH "^STM32([FGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" family_comp ${family_comp})
+    string(REGEX MATCH "^STM32([CFGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" family_comp ${family_comp})
     if(CMAKE_MATCH_1) #Matches the family part of the provided STM32<FAMILY>[..] component
         set(FAMILY ${CMAKE_MATCH_1})
         string(TOLOWER ${FAMILY} FAMILY_L)
@@ -143,7 +143,7 @@ message(STATUS "Search for HAL LL drivers: ${HAL_FIND_COMPONENTS_DRIVERS_LL}")
 foreach(COMP ${HAL_FIND_COMPONENTS_FAMILIES})
     string(TOUPPER ${COMP} COMP_U)
     
-    string(REGEX MATCH "^STM32([FGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP_U ${COMP_U})    
+    string(REGEX MATCH "^STM32([CFGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z])?_?(M0PLUS|M4|M7)?.*$" COMP_U ${COMP_U})    
     if(CMAKE_MATCH_3)
         set(CORE ${CMAKE_MATCH_3})
         set(CORE_C "::${CORE}")

cmake/stm32/c0.cmake

@@ -0,0 +1,25 @@
+set(STM32_C0_TYPES 
+    C011xx
+    C031xx
+)
+set(STM32_C0_TYPE_MATCH 
+    "C011.[46]"
+    "C031.[46]"
+)
+set(STM32_C0_RAM_SIZES 
+     6K
+    12K
+)
+set(STM32_C0_CCRAM_SIZES 
+     0K
+     0K
+)
+
+stm32_util_create_family_targets(C0)
+
+target_compile_options(STM32::C0 INTERFACE 
+    -mcpu=cortex-m0plus
+)
+target_link_options(STM32::C0 INTERFACE 
+    -mcpu=cortex-m0plus
+)

cmake/stm32/common.cmake

@@ -1,4 +1,5 @@
 set(STM32_SUPPORTED_FAMILIES_LONG_NAME
+    STM32C0
     STM32F0 STM32F1 STM32F2 STM32F3 STM32F4 STM32F7
     STM32G0 STM32G4
     STM32H7_M4 STM32H7_M7
@@ -9,7 +10,7 @@ set(STM32_SUPPORTED_FAMILIES_LONG_NAME
 
 foreach(FAMILY ${STM32_SUPPORTED_FAMILIES_LONG_NAME})
     # append short names (F0, F1, H7_M4, ...) to STM32_SUPPORTED_FAMILIES_SHORT_NAME
-    string(REGEX MATCH "^STM32([FGHLMUW]P?[0-9BL])_?(M0PLUS|M4|M7)?" FAMILY ${FAMILY})
+    string(REGEX MATCH "^STM32([CFGHLMUW]P?[0-9BL])_?(M0PLUS|M4|M7)?" FAMILY ${FAMILY})
     list(APPEND STM32_SUPPORTED_FAMILIES_SHORT_NAME ${CMAKE_MATCH_1})
 endforeach()
 list(REMOVE_DUPLICATES STM32_SUPPORTED_FAMILIES_SHORT_NAME)
@@ -142,7 +143,7 @@ function(stm32_get_chip_info CHIP)
 
     string(TOUPPER ${CHIP} CHIP)
 
-    string(REGEX MATCH "^STM32([FGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z]).*$" CHIP ${CHIP})
+    string(REGEX MATCH "^STM32([CFGHLMUW]P?[0-9BL])([0-9A-Z][0-9M][A-Z][0-9A-Z]).*$" CHIP ${CHIP})
 
     if((NOT CMAKE_MATCH_1) OR (NOT CMAKE_MATCH_2))
         message(FATAL_ERROR "Unknown chip ${CHIP}")
@@ -228,7 +229,7 @@ function(stm32_get_memory_info)
         stm32_get_chip_type(${INFO_FAMILY} ${INFO_DEVICE} INFO_TYPE)
     endif()
 
-    string(REGEX REPLACE "^[FGHLMUW]P?[0-9BL][0-9A-Z][0-9M].([3468ABCDEFGHIYZ])$" "\\1" SIZE_CODE ${INFO_DEVICE})
+    string(REGEX REPLACE "^[CFGHLMUW]P?[0-9BL][0-9A-Z][0-9M].([3468ABCDEFGHIYZ])$" "\\1" SIZE_CODE ${INFO_DEVICE})
 
     if(SIZE_CODE STREQUAL "3")
         set(FLASH "8K")
@@ -380,6 +381,7 @@ if(NOT (TARGET STM32::Nano::FloatScan))
 endif()
 
 include(stm32/utilities)
+include(stm32/c0)
 include(stm32/f0)
 include(stm32/f1)
 include(stm32/f2)

cmake/stm32/devices.cmake

@@ -1,4 +1,17 @@
 set(STM32_ALL_DEVICES
+    C011D6
+    C011F4
+    C011F6
+    C011J4
+    C011J6
+    C031C4
+    C031C6
+    C031F4
+    C031F6
+    C031G4
+    C031G6
+    C031K4
+    C031K6
     F030C6
     F030C8
     F030CC

cmake/stm32/utilities.cmake

@@ -43,10 +43,10 @@ endfunction()
 include(FetchContent)
 
 # A CMSIS or HAL driver can specify 'cube' as version number to indicate that the driver is taken from the Cube repository
-set(STM32_FETCH_FAMILIES       F0      F1      F2      F3      F4       F7      G0      G4      H7       L0      L1      L4      L5     MP1    U5     WB      WL    )
-set(STM32_FETCH_CUBE_VERSIONS  v1.11.2 v1.8.4  v1.9.3  v1.11.2 v1.26.1  v1.16.1 v1.4.1  v1.4.0  v1.9.0   v1.12.0 v1.10.3 v1.17.0 v1.4.0 1.5.0  v1.3.0 v1.12.0 v1.1.0)
-set(STM32_FETCH_CMSIS_VERSIONS v2.3.5  v4.3.3  v2.2.5  v2.3.5  v2.6.6   v1.2.6  v1.4.0  v1.2.1  v1.10.0  v1.9.1  v2.3.2  v1.7.1  v1.0.4 cube  v1.3.0 v1.9.0  v1.1.0)
-set(STM32_FETCH_HAL_VERSIONS   v1.7.5  v1.1.8  v1.2.7  v1.5.5  v1.7.12  v1.2.9  v1.4.1  v1.2.1  v1.10.0  v1.10.4 v1.4.4  v1.13.0 v1.0.4 cube  v1.3.0 v1.9.0  v1.1.0)
+set(STM32_FETCH_FAMILIES       C0     F0      F1      F2      F3      F4       F7      G0      G4      H7       L0      L1      L4      L5     MP1    U5     WB      WL    )
+set(STM32_FETCH_CUBE_VERSIONS  v1.1.0 v1.11.2 v1.8.4  v1.9.3  v1.11.2 v1.26.1  v1.16.1 v1.4.1  v1.4.0  v1.9.0   v1.12.0 v1.10.3 v1.17.0 v1.4.0 1.5.0  v1.3.0 v1.12.0 v1.1.0)
+set(STM32_FETCH_CMSIS_VERSIONS v1.1.0 v2.3.5  v4.3.3  v2.2.5  v2.3.5  v2.6.6   v1.2.6  v1.4.0  v1.2.1  v1.10.0  v1.9.1  v2.3.2  v1.7.1  v1.0.4 cube  v1.3.0 v1.9.0  v1.1.0)
+set(STM32_FETCH_HAL_VERSIONS   v1.1.0 v1.7.5  v1.1.8  v1.2.7  v1.5.5  v1.7.12  v1.2.9  v1.4.1  v1.2.1  v1.10.0  v1.10.4 v1.4.4  v1.13.0 v1.0.4 cube  v1.3.0 v1.9.0  v1.1.0)
 
 
 FetchContent_Declare(

tests/bsp/CMakeLists.txt

@@ -2,10 +2,11 @@ cmake_minimum_required(VERSION 3.16)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U5 WB WL)
+    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U5 WB WL)
 endif()
 
 # Nucleo boards can have different devices on it
+set(DEVICE_STM32C0xx_Nucleo C031C6)
 set(DEVICE_STM32F0xx_Nucleo_32 F031K6)
 set(DEVICE_STM32F0xx_Nucleo F030R8)
 set(DEVICE_STM32F1xx_Nucleo F103RB)

tests/bsp/stm32c0xx_hal_conf.h

@@ -0,0 +1,275 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32c0xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32c0xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32C0xx_HAL_CONF_H
+#define STM32C0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## Register Callbacks selection ############################## */
+/**
+  * @brief Set below the peripheral configuration  to "1U" to add the support
+  *        of HAL callback registration/unregistration feature for the HAL
+  *        driver(s). This allows user application to provide specific callback
+  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
+  *        the default weak callback functions (see each stm32c0xx_hal_ppp.h file
+  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
+  *        for each PPP peripheral).
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS         0U  /* ADC register callback disabled      */
+#define USE_HAL_I2C_REGISTER_CALLBACKS         0U  /* I2C register callback disabled      */
+#define USE_HAL_IRDA_REGISTER_CALLBACKS        0U  /* IRDA register callback disabled     */
+#define USE_HAL_I2S_REGISTER_CALLBACKS         0U  /* I2S register callback disabled      */
+#define USE_HAL_IWDG_REGISTER_CALLBACKS        0U  /* IWDG register callback disabled     */
+#define USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE    (8000000U)         /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT    (100UL)         /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE    (48000000UL)            /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+#define LSI_VALUE  (32000UL)                /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+The real value may vary depending on the variations
+in voltage and temperature.*/
+#if !defined  (LSI_STARTUP_TIME)
+#define LSI_STARTUP_TIME    130UL      /*!< Time out for LSI start up, in ms */
+#endif /* LSI_STARTUP_TIME */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+#define LSE_VALUE    (32768UL)               /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT    (5000UL)      /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S1 peripheral
+  *        This value is used by the RCC HAL module to compute the I2S1 clock source
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_I2S1_CLOCK_VALUE)
+#define EXTERNAL_I2S1_CLOCK_VALUE    (12288000UL) /*!< Value of the I2S1 External clock source in Hz*/
+#endif /* EXTERNAL_I2S1_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    (3300UL)                                        /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            3U /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include modules header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32c0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32c0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32c0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32c0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32c0xx_hal_adc.h"
+  #include "stm32c0xx_hal_adc_ex.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32c0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32c0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32c0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32c0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32c0xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32c0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32c0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32c0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32c0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32c0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32c0xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32c0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32c0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32c0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32c0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32c0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for functions parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t *file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32C0xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

tests/cmsis/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.16)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 U5 WB WL)
+    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 U5 WB WL)
 endif()
 
 if("MP1" IN_LIST TEST_FAMILIES)

tests/fetch/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.16)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U5 WB WL)
+    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U5 WB WL)
 endif()
 
 # Generate the family long names list by prepending STM32 to elements in TEST_FAMILIES

tests/fetch/stm32c0xx_hal_conf.h

@@ -0,0 +1,275 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32c0xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32c0xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32C0xx_HAL_CONF_H
+#define STM32C0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+/* #define HAL_ADC_MODULE_ENABLED   */
+/* #define HAL_CRC_MODULE_ENABLED   */
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_I2C_MODULE_ENABLED   */
+/* #define HAL_I2S_MODULE_ENABLED   */
+/* #define HAL_IWDG_MODULE_ENABLED   */
+/* #define HAL_IRDA_MODULE_ENABLED   */
+/* #define HAL_PCD_MODULE_ENABLED   */
+/* #define HAL_RNG_MODULE_ENABLED   */
+/* #define HAL_RTC_MODULE_ENABLED   */
+/* #define HAL_SMARTCARD_MODULE_ENABLED   */
+/* #define HAL_SMBUS_MODULE_ENABLED   */
+/* #define HAL_SPI_MODULE_ENABLED   */
+/* #define HAL_TIM_MODULE_ENABLED   */
+/* #define HAL_UART_MODULE_ENABLED   */
+/* #define HAL_USART_MODULE_ENABLED   */
+/* #define HAL_WWDG_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## Register Callbacks selection ############################## */
+/**
+  * @brief Set below the peripheral configuration  to "1U" to add the support
+  *        of HAL callback registration/unregistration feature for the HAL
+  *        driver(s). This allows user application to provide specific callback
+  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
+  *        the default weak callback functions (see each stm32c0xx_hal_ppp.h file
+  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
+  *        for each PPP peripheral).
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS         0U  /* ADC register callback disabled      */
+#define USE_HAL_I2C_REGISTER_CALLBACKS         0U  /* I2C register callback disabled      */
+#define USE_HAL_IRDA_REGISTER_CALLBACKS        0U  /* IRDA register callback disabled     */
+#define USE_HAL_I2S_REGISTER_CALLBACKS         0U  /* I2S register callback disabled      */
+#define USE_HAL_IWDG_REGISTER_CALLBACKS        0U  /* IWDG register callback disabled     */
+#define USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE    (8000000U)         /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT    (100UL)         /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE    (48000000UL)            /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+#define LSI_VALUE  (32000UL)                /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+The real value may vary depending on the variations
+in voltage and temperature.*/
+#if !defined  (LSI_STARTUP_TIME)
+#define LSI_STARTUP_TIME    130UL      /*!< Time out for LSI start up, in ms */
+#endif /* LSI_STARTUP_TIME */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+#define LSE_VALUE    (32768UL)               /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT    (5000UL)      /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S1 peripheral
+  *        This value is used by the RCC HAL module to compute the I2S1 clock source
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_I2S1_CLOCK_VALUE)
+#define EXTERNAL_I2S1_CLOCK_VALUE    (12288000UL) /*!< Value of the I2S1 External clock source in Hz*/
+#endif /* EXTERNAL_I2S1_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    (3300UL)                                        /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            3U /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include modules header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32c0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32c0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32c0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32c0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32c0xx_hal_adc.h"
+  #include "stm32c0xx_hal_adc_ex.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32c0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32c0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32c0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32c0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32c0xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32c0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32c0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32c0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32c0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32c0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32c0xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32c0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32c0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32c0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32c0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32c0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for functions parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t *file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32C0xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

tests/hal/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.16)
 set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../../cmake/stm32_gcc.cmake)
 
 if(NOT TEST_FAMILIES)
-    set(TEST_FAMILIES F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U5 WB WL)
+    set(TEST_FAMILIES C0 F0 F1 F2 F3 F4 F7 G0 G4 H7 L0 L1 L4 L5 MP1 U5 WB WL)
 endif()
 
 # Generate the family long names list by prepending STM32 to elements in TEST_FAMILIES

tests/hal/stm32c0xx_hal_conf.h

@@ -0,0 +1,275 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32c0xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32c0xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32C0xx_HAL_CONF_H
+#define STM32C0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+/* #define HAL_ADC_MODULE_ENABLED   */
+/* #define HAL_CRC_MODULE_ENABLED   */
+/* #define HAL_CRYP_MODULE_ENABLED   */
+/* #define HAL_I2C_MODULE_ENABLED   */
+/* #define HAL_I2S_MODULE_ENABLED   */
+/* #define HAL_IWDG_MODULE_ENABLED   */
+/* #define HAL_IRDA_MODULE_ENABLED   */
+/* #define HAL_PCD_MODULE_ENABLED   */
+/* #define HAL_RNG_MODULE_ENABLED   */
+/* #define HAL_RTC_MODULE_ENABLED   */
+/* #define HAL_SMARTCARD_MODULE_ENABLED   */
+/* #define HAL_SMBUS_MODULE_ENABLED   */
+/* #define HAL_SPI_MODULE_ENABLED   */
+/* #define HAL_TIM_MODULE_ENABLED   */
+/* #define HAL_UART_MODULE_ENABLED   */
+/* #define HAL_USART_MODULE_ENABLED   */
+/* #define HAL_WWDG_MODULE_ENABLED   */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## Register Callbacks selection ############################## */
+/**
+  * @brief Set below the peripheral configuration  to "1U" to add the support
+  *        of HAL callback registration/unregistration feature for the HAL
+  *        driver(s). This allows user application to provide specific callback
+  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
+  *        the default weak callback functions (see each stm32c0xx_hal_ppp.h file
+  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
+  *        for each PPP peripheral).
+  */
+#define USE_HAL_ADC_REGISTER_CALLBACKS         0U  /* ADC register callback disabled      */
+#define USE_HAL_I2C_REGISTER_CALLBACKS         0U  /* I2C register callback disabled      */
+#define USE_HAL_IRDA_REGISTER_CALLBACKS        0U  /* IRDA register callback disabled     */
+#define USE_HAL_I2S_REGISTER_CALLBACKS         0U  /* I2S register callback disabled      */
+#define USE_HAL_IWDG_REGISTER_CALLBACKS        0U  /* IWDG register callback disabled     */
+#define USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE    (8000000U)         /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT    (100UL)         /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE    (48000000UL)            /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+#define LSI_VALUE  (32000UL)                /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+The real value may vary depending on the variations
+in voltage and temperature.*/
+#if !defined  (LSI_STARTUP_TIME)
+#define LSI_STARTUP_TIME    130UL      /*!< Time out for LSI start up, in ms */
+#endif /* LSI_STARTUP_TIME */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+#define LSE_VALUE    (32768UL)               /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT    (5000UL)      /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S1 peripheral
+  *        This value is used by the RCC HAL module to compute the I2S1 clock source
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_I2S1_CLOCK_VALUE)
+#define EXTERNAL_I2S1_CLOCK_VALUE    (12288000UL) /*!< Value of the I2S1 External clock source in Hz*/
+#endif /* EXTERNAL_I2S1_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    (3300UL)                                        /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            3U /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              0U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include modules header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32c0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32c0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32c0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32c0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32c0xx_hal_adc.h"
+  #include "stm32c0xx_hal_adc_ex.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32c0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32c0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32c0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32c0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32c0xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32c0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32c0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32c0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32c0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32c0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32c0xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32c0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32c0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32c0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32c0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32c0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for functions parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t *file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32C0xx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/