|
|
@@ -5,12 +5,15 @@
|
|
|
4. Click on the File-Opener.
|
|
|
5. Naviate to `SD Card/apps_data/esp_flasher/
|
|
|
6. Drag all three bin files (or the entire folder) into the directory.
|
|
|
-7. Plug your Wi-Fi Devboard into the Flipper.
|
|
|
-8. Press and keep holding the boot button while you press the reset button once, release the boot button after 2 seconds.
|
|
|
-9. Open the ESP Flasher app on your Flipper Zero, it should be located under `Apps->GPIO` from the main menu. If not, download it from the Flipper App Store.
|
|
|
-10. Click on Manual Flash.
|
|
|
-11. Click on Bootloader and select the `web_crawler_bootloader.bin` that you downloaded earlier.
|
|
|
-12. Click on Part Table and select the `web_crawler_partitions.bin` that you downloaded earlier.
|
|
|
-13. Click on FirmwareA and select the `web_crawler_firmware_a.bin` that you downloaded earlier.
|
|
|
-14. Click on FLASH - fast and follow the instructions on the screen.
|
|
|
-15. Now you are all set to use the Web Crawler app.
|
|
|
+7. Disconnect your Flipper Zero from your computer.
|
|
|
+8. Plug your Wi-Fi Devboard into the Flipper.
|
|
|
+9. Press and keep holding the boot button while you press the reset button once, release the boot button after 2 seconds.
|
|
|
+10. Open the ESP Flasher app on your Flipper Zero, it should be located under `Apps->GPIO` from the main menu. If not, download it from the Flipper App Store.
|
|
|
+11. Click on Manual Flash.
|
|
|
+12. Click on Bootloader and select the `web_crawler_bootloader.bin` that you downloaded earlier.
|
|
|
+13. Click on Part Table and select the `web_crawler_partitions.bin` that you downloaded earlier.
|
|
|
+14. Click on FirmwareA and select the `web_crawler_firmware_a.bin` that you downloaded earlier.
|
|
|
+15. Click on FLASH - fast and follow the instructions on the screen.
|
|
|
+16. Now you are all set to use the Web Crawler app.
|
|
|
+
|
|
|
+Guide: https://www.youtube.com/watch?v=Y2lUVTMTABE&t=19s
|
JBlanked