CC1101 custom presets updated.

app_subghz.c

@@ -23,8 +23,9 @@ ProtoViewModulation ProtoViewModulations[] = {
                     FuriHalSubGhzPreset2FSKDev476Async, NULL},
     {"TPMS 1 (FSK)", NULL, 0, (uint8_t*)protoview_subghz_tpms1_fsk_async_regs},
     {"TPMS 2 (OOK)", NULL, 0, (uint8_t*)protoview_subghz_tpms2_ook_async_regs},
-    {"TPMS 3 (FSK)", NULL, 0, (uint8_t*)protoview_subghz_tpms3_fsk_async_regs},
-    {"TPMS 4 (FSK)", NULL, 0, (uint8_t*)protoview_subghz_tpms4_fsk_async_regs},
+    {"TPMS 3 (GFSK)", NULL, 0, (uint8_t*)protoview_subghz_tpms3_gfsk_async_regs},
+    {"OOK 40kBaud", NULL, 0, (uint8_t*)protoview_subghz_40k_ook_async_regs},
+    {"FSK 40kBaud", NULL, 0, (uint8_t*)protoview_subghz_40k_fsk_async_regs},
     {NULL, NULL, 0, NULL} /* End of list sentinel. */
 };
 

custom_presets.h

@@ -1,5 +1,4 @@
 #include <cc1101.h>
-
 /* ========================== DATA RATE SETTINGS ===============================
  *
  * This is how to configure registers MDMCFG3 and MDMCFG4.
@@ -159,8 +158,55 @@ static const uint8_t protoview_subghz_tpms2_ook_async_regs[][2] = {
     {0, 0xC0}, {0,0}, {0,0}, {0,0}
 };
 
+/* GFSK 19k dev, 325 Khz filter, 20kBaud. Different AGI settings.
+ * Works well with Toyota. */
+static uint8_t protoview_subghz_tpms3_gfsk_async_regs[][2] = {
+    /* GPIO GD0 */
+    {CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
+
+    /* Frequency Synthesizer Control */
+    {CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
+
+    /* Packet engine */
+    {CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
+    {CC1101_PKTCTRL1, 0x04},
+
+    // // Modem Configuration
+    {CC1101_MDMCFG0, 0x00},
+    {CC1101_MDMCFG1, 0x02}, // 2 is the channel spacing exponet: not used
+    {CC1101_MDMCFG2, 0x10}, // GFSK without any other check
+    {CC1101_MDMCFG3, 0x93}, // Data rate is 20kBaud
+    {CC1101_MDMCFG4, 0x59}, // Rx bandwidth filter is 325 kHz
+    {CC1101_DEVIATN, 0x34}, // Deviation 19.04 Khz.
+
+    /* Main Radio Control State Machine */
+    {CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
+
+    /* Frequency Offset Compensation Configuration */
+    {CC1101_FOCCFG,
+     0x16}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
+
+    /* Automatic Gain Control */
+    {CC1101_AGCCTRL0, 0x80},
+    {CC1101_AGCCTRL1, 0x58},
+    {CC1101_AGCCTRL2, 0x87},
+
+    /* Wake on radio and timeouts control */
+    {CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
+
+    /* Frontend configuration */
+    {CC1101_FREND0, 0x10}, // Adjusts current TX LO buffer
+    {CC1101_FREND1, 0x56},
+
+    /* End  */
+    {0, 0},
+
+    /* CC1101 2FSK PATABLE. */
+    {0xC0, 0}, {0,0}, {0,0}, {0,0}
+};
+
 /* 40 KBaud, 2FSK, 28 kHz deviation, 270 Khz bandwidth filter. */
-static uint8_t protoview_subghz_tpms3_fsk_async_regs[][2] = {
+static uint8_t protoview_subghz_40k_fsk_async_regs[][2] = {
     /* GPIO GD0 */
     {CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
 
@@ -207,49 +253,54 @@ static uint8_t protoview_subghz_tpms3_fsk_async_regs[][2] = {
     {0xC0, 0}, {0,0}, {0,0}, {0,0}
 };
 
-/* FSK 19k dev, 325 Khz filter, 20kBaud. Works well with Toyota. */
-static uint8_t protoview_subghz_tpms4_fsk_async_regs[][2] = {
+/* This is like the default Flipper OOK 640Khz bandwidth preset, but
+ * the bandwidth is changed to 40kBaud, in order to receive signals
+ * with a pulse width ~25us/30us. */
+static const uint8_t protoview_subghz_40k_ook_async_regs[][2] = {
     /* GPIO GD0 */
     {CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
 
-    /* Frequency Synthesizer Control */
-    {CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
+    /* FIFO and internals */
+    {CC1101_FIFOTHR, 0x07}, // The only important bit is ADC_RETENTION
 
     /* Packet engine */
     {CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
-    {CC1101_PKTCTRL1, 0x04},
 
-    // // Modem Configuration
-    {CC1101_MDMCFG0, 0x00},
-    {CC1101_MDMCFG1, 0x02}, // 2 is the channel spacing exponet: not used
-    {CC1101_MDMCFG2, 0x10}, // GFSK without any other check
-    {CC1101_MDMCFG3, 0x93}, // Data rate is 20kBaud
-    {CC1101_MDMCFG4, 0x59}, // Rx bandwidth filter is 325 kHz
-    {CC1101_DEVIATN, 0x34}, // Deviation 19.04 Khz.
+    /* Frequency Synthesizer Control */
+    {CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
+
+    // Modem Configuration
+    {CC1101_MDMCFG0, 0x00}, // Channel spacing is 25kHz
+    {CC1101_MDMCFG1, 0x00}, // Channel spacing is 25kHz
+    {CC1101_MDMCFG2, 0x30}, // Format ASK/OOK, No preamble/sync
+    {CC1101_MDMCFG3, 0x93}, // Data rate is 40kBaud
+    {CC1101_MDMCFG4, 0x1A}, // Rx BW filter is 650.000kHz
 
     /* Main Radio Control State Machine */
     {CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
 
     /* Frequency Offset Compensation Configuration */
     {CC1101_FOCCFG,
-     0x16}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
+     0x18}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
 
     /* Automatic Gain Control */
-    {CC1101_AGCCTRL0, 0x80},
-    {CC1101_AGCCTRL1, 0x58},
-    {CC1101_AGCCTRL2, 0x87},
+    {CC1101_AGCCTRL0,
+     0x91}, // 10 - Medium hysteresis, medium asymmetric dead zone, medium gain ; 01 - 16 samples agc; 00 - Normal AGC, 01 - 8dB boundary
+    {CC1101_AGCCTRL1,
+     0x0}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
+    {CC1101_AGCCTRL2, 0x07}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 111 - MAIN_TARGET 42 dB
 
     /* Wake on radio and timeouts control */
     {CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
 
     /* Frontend configuration */
-    {CC1101_FREND0, 0x10}, // Adjusts current TX LO buffer
-    {CC1101_FREND1, 0x56},
+    {CC1101_FREND0, 0x11}, // Adjusts current TX LO buffer + high is PATABLE[1]
+    {CC1101_FREND1, 0xB6}, //
 
     /* End  */
     {0, 0},
 
-    /* CC1101 2FSK PATABLE. */
-    {0xC0, 0}, {0,0}, {0,0}, {0,0}
+    /* CC1101 OOK PATABLE. */
+    {0, 0xC0}, {0,0}, {0,0}, {0,0}
 };