Update stm32g0xx_hal_conf.h everywhere

tests/bsp/stm32g0xx_hal_conf.h

@@ -45,12 +45,15 @@ extern "C" {
 #define HAL_DMA_MODULE_ENABLED
 #define HAL_EXTI_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
+#define HAL_FDCAN_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
 #define HAL_I2C_MODULE_ENABLED
 #define HAL_I2S_MODULE_ENABLED
 #define HAL_IRDA_MODULE_ENABLED
 #define HAL_IWDG_MODULE_ENABLED
 #define HAL_LPTIM_MODULE_ENABLED
+//#define HAL_HCD_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
 #define HAL_RNG_MODULE_ENABLED
@@ -67,23 +70,27 @@ extern "C" {
 /**
   * @brief This is the list of modules where register callback can be used
   */
-#define USE_HAL_ADC_REGISTER_CALLBACKS    0u
-#define USE_HAL_CEC_REGISTER_CALLBACKS    0u
-#define USE_HAL_COMP_REGISTER_CALLBACKS   0u
-#define USE_HAL_CRYP_REGISTER_CALLBACKS   0u
-#define USE_HAL_DAC_REGISTER_CALLBACKS    0u
-#define USE_HAL_I2C_REGISTER_CALLBACKS    0u
-#define USE_HAL_I2S_REGISTER_CALLBACKS    0u
-#define USE_HAL_IRDA_REGISTER_CALLBACKS   0u
-#define USE_HAL_LPTIM_REGISTER_CALLBACKS  0u
-#define USE_HAL_RNG_REGISTER_CALLBACKS    0u
-#define USE_HAL_RTC_REGISTER_CALLBACKS    0u
-#define USE_HAL_SMBUS_REGISTER_CALLBACKS  0u
-#define USE_HAL_SPI_REGISTER_CALLBACKS    0u
-#define USE_HAL_TIM_REGISTER_CALLBACKS    0u
-#define USE_HAL_UART_REGISTER_CALLBACKS   0u
-#define USE_HAL_USART_REGISTER_CALLBACKS  0u
-#define USE_HAL_WWDG_REGISTER_CALLBACKS   0u
+#define USE_HAL_ADC_REGISTER_CALLBACKS        0u
+#define USE_HAL_CEC_REGISTER_CALLBACKS        0u
+#define USE_HAL_COMP_REGISTER_CALLBACKS       0u
+#define USE_HAL_CRYP_REGISTER_CALLBACKS       0u
+#define USE_HAL_DAC_REGISTER_CALLBACKS        0u
+#define USE_HAL_FDCAN_REGISTER_CALLBACKS      0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS        0u
+#define USE_HAL_I2S_REGISTER_CALLBACKS        0u
+#define USE_HAL_IRDA_REGISTER_CALLBACKS       0u
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS      0u
+#define USE_HAL_HCD_REGISTER_CALLBACKS        0u
+#define USE_HAL_PCD_REGISTER_CALLBACKS        0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS        0u
+#define USE_HAL_RTC_REGISTER_CALLBACKS        0u
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0u
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS      0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS        0u
+#define USE_HAL_TIM_REGISTER_CALLBACKS        0u
+#define USE_HAL_UART_REGISTER_CALLBACKS       0u
+#define USE_HAL_USART_REGISTER_CALLBACKS      0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS       0u
 
 /* ########################## Oscillator Values adaptation ####################*/
 /**
@@ -108,6 +115,19 @@ extern "C" {
 #define HSI_VALUE    (16000000UL)           /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
+#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
+/**
+  * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
+  *        This internal oscillator is mainly dedicated to provide a high precision clock to
+  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+  *        which is subject to manufacturing process variations.
+  */
+#if !defined  (HSI48_VALUE) 
+  #define HSI48_VALUE   48000000U             /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
+                                               The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+#endif
 
 /**
   * @brief Internal Low Speed oscillator (LSI) value.
@@ -138,6 +158,16 @@ in voltage and temperature.*/
 #define EXTERNAL_I2S1_CLOCK_VALUE    (48000UL) /*!< Value of the I2S1 External clock source in Hz*/
 #endif /* EXTERNAL_I2S1_CLOCK_VALUE */
 
+#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
+/**
+  * @brief External clock source for I2S2 peripheral
+  *        This value is used by the RCC HAL module to compute the I2S2 clock source 
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_I2S2_CLOCK_VALUE)
+  #define EXTERNAL_I2S2_CLOCK_VALUE    48000U /*!< Value of the I2S2 External clock source in Hz*/
+#endif /* EXTERNAL_I2S2_CLOCK_VALUE */
+#endif
 
 /* Tip: To avoid modifying this file each time you need to use different HSE,
    ===  you can define the HSE value in your toolchain compiler preprocessor. */
@@ -223,6 +253,10 @@ in voltage and temperature.*/
 #include "stm32g0xx_hal_exti.h"
 #endif /* HAL_EXTI_MODULE_ENABLED */
 
+#ifdef HAL_FDCAN_MODULE_ENABLED
+#include "stm32g0xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
 #ifdef HAL_FLASH_MODULE_ENABLED
 #include "stm32g0xx_hal_flash.h"
 #endif /* HAL_FLASH_MODULE_ENABLED */
@@ -247,6 +281,14 @@ in voltage and temperature.*/
 #include "stm32g0xx_hal_lptim.h"
 #endif /* HAL_LPTIM_MODULE_ENABLED */
 
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32g0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32g0xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
 #ifdef HAL_PWR_MODULE_ENABLED
 #include "stm32g0xx_hal_pwr.h"
 #endif /* HAL_PWR_MODULE_ENABLED */

tests/fetch/stm32g0xx_hal_conf.h

@@ -45,12 +45,15 @@ extern "C" {
 #define HAL_DMA_MODULE_ENABLED
 #define HAL_EXTI_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
+#define HAL_FDCAN_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
 #define HAL_I2C_MODULE_ENABLED
 #define HAL_I2S_MODULE_ENABLED
 #define HAL_IRDA_MODULE_ENABLED
 #define HAL_IWDG_MODULE_ENABLED
 #define HAL_LPTIM_MODULE_ENABLED
+// #define HAL_HCD_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
 #define HAL_RNG_MODULE_ENABLED
@@ -67,23 +70,27 @@ extern "C" {
 /**
   * @brief This is the list of modules where register callback can be used
   */
-#define USE_HAL_ADC_REGISTER_CALLBACKS    0u
-#define USE_HAL_CEC_REGISTER_CALLBACKS    0u
-#define USE_HAL_COMP_REGISTER_CALLBACKS   0u
-#define USE_HAL_CRYP_REGISTER_CALLBACKS   0u
-#define USE_HAL_DAC_REGISTER_CALLBACKS    0u
-#define USE_HAL_I2C_REGISTER_CALLBACKS    0u
-#define USE_HAL_I2S_REGISTER_CALLBACKS    0u
-#define USE_HAL_IRDA_REGISTER_CALLBACKS   0u
-#define USE_HAL_LPTIM_REGISTER_CALLBACKS  0u
-#define USE_HAL_RNG_REGISTER_CALLBACKS    0u
-#define USE_HAL_RTC_REGISTER_CALLBACKS    0u
-#define USE_HAL_SMBUS_REGISTER_CALLBACKS  0u
-#define USE_HAL_SPI_REGISTER_CALLBACKS    0u
-#define USE_HAL_TIM_REGISTER_CALLBACKS    0u
-#define USE_HAL_UART_REGISTER_CALLBACKS   0u
-#define USE_HAL_USART_REGISTER_CALLBACKS  0u
-#define USE_HAL_WWDG_REGISTER_CALLBACKS   0u
+#define USE_HAL_ADC_REGISTER_CALLBACKS        0u
+#define USE_HAL_CEC_REGISTER_CALLBACKS        0u
+#define USE_HAL_COMP_REGISTER_CALLBACKS       0u
+#define USE_HAL_CRYP_REGISTER_CALLBACKS       0u
+#define USE_HAL_DAC_REGISTER_CALLBACKS        0u
+#define USE_HAL_FDCAN_REGISTER_CALLBACKS      0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS        0u
+#define USE_HAL_I2S_REGISTER_CALLBACKS        0u
+#define USE_HAL_IRDA_REGISTER_CALLBACKS       0u
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS      0u
+#define USE_HAL_HCD_REGISTER_CALLBACKS        0u
+#define USE_HAL_PCD_REGISTER_CALLBACKS        0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS        0u
+#define USE_HAL_RTC_REGISTER_CALLBACKS        0u
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0u
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS      0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS        0u
+#define USE_HAL_TIM_REGISTER_CALLBACKS        0u
+#define USE_HAL_UART_REGISTER_CALLBACKS       0u
+#define USE_HAL_USART_REGISTER_CALLBACKS      0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS       0u
 
 /* ########################## Oscillator Values adaptation ####################*/
 /**
@@ -108,6 +115,19 @@ extern "C" {
 #define HSI_VALUE    (16000000UL)           /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
+#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
+/**
+  * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
+  *        This internal oscillator is mainly dedicated to provide a high precision clock to
+  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+  *        which is subject to manufacturing process variations.
+  */
+#if !defined  (HSI48_VALUE) 
+  #define HSI48_VALUE   48000000U             /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
+                                               The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+#endif
 
 /**
   * @brief Internal Low Speed oscillator (LSI) value.
@@ -138,6 +158,16 @@ in voltage and temperature.*/
 #define EXTERNAL_I2S1_CLOCK_VALUE    (48000UL) /*!< Value of the I2S1 External clock source in Hz*/
 #endif /* EXTERNAL_I2S1_CLOCK_VALUE */
 
+#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
+/**
+  * @brief External clock source for I2S2 peripheral
+  *        This value is used by the RCC HAL module to compute the I2S2 clock source 
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_I2S2_CLOCK_VALUE)
+  #define EXTERNAL_I2S2_CLOCK_VALUE    48000U /*!< Value of the I2S2 External clock source in Hz*/
+#endif /* EXTERNAL_I2S2_CLOCK_VALUE */
+#endif
 
 /* Tip: To avoid modifying this file each time you need to use different HSE,
    ===  you can define the HSE value in your toolchain compiler preprocessor. */
@@ -223,6 +253,10 @@ in voltage and temperature.*/
 #include "stm32g0xx_hal_exti.h"
 #endif /* HAL_EXTI_MODULE_ENABLED */
 
+#ifdef HAL_FDCAN_MODULE_ENABLED
+#include "stm32g0xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
 #ifdef HAL_FLASH_MODULE_ENABLED
 #include "stm32g0xx_hal_flash.h"
 #endif /* HAL_FLASH_MODULE_ENABLED */
@@ -247,6 +281,14 @@ in voltage and temperature.*/
 #include "stm32g0xx_hal_lptim.h"
 #endif /* HAL_LPTIM_MODULE_ENABLED */
 
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32g0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32g0xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
 #ifdef HAL_PWR_MODULE_ENABLED
 #include "stm32g0xx_hal_pwr.h"
 #endif /* HAL_PWR_MODULE_ENABLED */

tests/hal/stm32g0xx_hal_conf.h

@@ -45,12 +45,15 @@ extern "C" {
 #define HAL_DMA_MODULE_ENABLED
 #define HAL_EXTI_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
+#define HAL_FDCAN_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
 #define HAL_I2C_MODULE_ENABLED
 #define HAL_I2S_MODULE_ENABLED
 #define HAL_IRDA_MODULE_ENABLED
 #define HAL_IWDG_MODULE_ENABLED
 #define HAL_LPTIM_MODULE_ENABLED
+// #define HAL_HCD_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
 #define HAL_RNG_MODULE_ENABLED
@@ -67,23 +70,27 @@ extern "C" {
 /**
   * @brief This is the list of modules where register callback can be used
   */
-#define USE_HAL_ADC_REGISTER_CALLBACKS    0u
-#define USE_HAL_CEC_REGISTER_CALLBACKS    0u
-#define USE_HAL_COMP_REGISTER_CALLBACKS   0u
-#define USE_HAL_CRYP_REGISTER_CALLBACKS   0u
-#define USE_HAL_DAC_REGISTER_CALLBACKS    0u
-#define USE_HAL_I2C_REGISTER_CALLBACKS    0u
-#define USE_HAL_I2S_REGISTER_CALLBACKS    0u
-#define USE_HAL_IRDA_REGISTER_CALLBACKS   0u
-#define USE_HAL_LPTIM_REGISTER_CALLBACKS  0u
-#define USE_HAL_RNG_REGISTER_CALLBACKS    0u
-#define USE_HAL_RTC_REGISTER_CALLBACKS    0u
-#define USE_HAL_SMBUS_REGISTER_CALLBACKS  0u
-#define USE_HAL_SPI_REGISTER_CALLBACKS    0u
-#define USE_HAL_TIM_REGISTER_CALLBACKS    0u
-#define USE_HAL_UART_REGISTER_CALLBACKS   0u
-#define USE_HAL_USART_REGISTER_CALLBACKS  0u
-#define USE_HAL_WWDG_REGISTER_CALLBACKS   0u
+#define USE_HAL_ADC_REGISTER_CALLBACKS        0u
+#define USE_HAL_CEC_REGISTER_CALLBACKS        0u
+#define USE_HAL_COMP_REGISTER_CALLBACKS       0u
+#define USE_HAL_CRYP_REGISTER_CALLBACKS       0u
+#define USE_HAL_DAC_REGISTER_CALLBACKS        0u
+#define USE_HAL_FDCAN_REGISTER_CALLBACKS      0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS        0u
+#define USE_HAL_I2S_REGISTER_CALLBACKS        0u
+#define USE_HAL_IRDA_REGISTER_CALLBACKS       0u
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS      0u
+#define USE_HAL_HCD_REGISTER_CALLBACKS        0u
+#define USE_HAL_PCD_REGISTER_CALLBACKS        0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS        0u
+#define USE_HAL_RTC_REGISTER_CALLBACKS        0u
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0u
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS      0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS        0u
+#define USE_HAL_TIM_REGISTER_CALLBACKS        0u
+#define USE_HAL_UART_REGISTER_CALLBACKS       0u
+#define USE_HAL_USART_REGISTER_CALLBACKS      0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS       0u
 
 /* ########################## Oscillator Values adaptation ####################*/
 /**
@@ -108,6 +115,19 @@ extern "C" {
 #define HSI_VALUE    (16000000UL)           /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
+#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
+/**
+  * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
+  *        This internal oscillator is mainly dedicated to provide a high precision clock to
+  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+  *        which is subject to manufacturing process variations.
+  */
+#if !defined  (HSI48_VALUE) 
+  #define HSI48_VALUE   48000000U             /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
+                                               The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+#endif
 
 /**
   * @brief Internal Low Speed oscillator (LSI) value.
@@ -138,6 +158,16 @@ in voltage and temperature.*/
 #define EXTERNAL_I2S1_CLOCK_VALUE    (48000UL) /*!< Value of the I2S1 External clock source in Hz*/
 #endif /* EXTERNAL_I2S1_CLOCK_VALUE */
 
+#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
+/**
+  * @brief External clock source for I2S2 peripheral
+  *        This value is used by the RCC HAL module to compute the I2S2 clock source 
+  *        frequency.
+  */
+#if !defined  (EXTERNAL_I2S2_CLOCK_VALUE)
+  #define EXTERNAL_I2S2_CLOCK_VALUE    48000U /*!< Value of the I2S2 External clock source in Hz*/
+#endif /* EXTERNAL_I2S2_CLOCK_VALUE */
+#endif
 
 /* Tip: To avoid modifying this file each time you need to use different HSE,
    ===  you can define the HSE value in your toolchain compiler preprocessor. */
@@ -223,6 +253,10 @@ in voltage and temperature.*/
 #include "stm32g0xx_hal_exti.h"
 #endif /* HAL_EXTI_MODULE_ENABLED */
 
+#ifdef HAL_FDCAN_MODULE_ENABLED
+#include "stm32g0xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
 #ifdef HAL_FLASH_MODULE_ENABLED
 #include "stm32g0xx_hal_flash.h"
 #endif /* HAL_FLASH_MODULE_ENABLED */
@@ -247,6 +281,14 @@ in voltage and temperature.*/
 #include "stm32g0xx_hal_lptim.h"
 #endif /* HAL_LPTIM_MODULE_ENABLED */
 
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32g0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32g0xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
 #ifdef HAL_PWR_MODULE_ENABLED
 #include "stm32g0xx_hal_pwr.h"
 #endif /* HAL_PWR_MODULE_ENABLED */