Implemented FreeRTOS example for STM32F100RB boards (e.g. STM32-VLDiscovery)

examples/freertos/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.16)
 set(PROJ_NAME stm32-freertos)
 set(STM32_CMAKE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/../..)
 
-# Please note: When using CMSIS, it is recommended to use the FreeRTOS version supplied in the 
+# Please note: When using CMSIS, it is recommended to use the FreeRTOS version supplied in the
 # Cube repository because more recent kernels might be incompatible to the CMSIS
 # implementation provided by STM
 option(USE_CMSIS_RTOS "Use CMSIS RTOS provided by Cube repository" OFF)
@@ -33,13 +33,13 @@ set(CMAKE_INCLUDE_CURRENT_DIR TRUE)
 # Can be used to print out all devices for the H7 or/and the F4 family
 # stm32_print_devices_by_family(FAMILY H7)
 # stm32_print_devices_by_family(FAMILY F4)
-
-set(SUPPORTED_BOARDS F407VG H743ZI L552ZE)
+set(SUPPORTED_BOARDS F100RB F407VG H743ZI L552ZE)
+option(FREERTOS_F100RB_EXAMPLE "Compile FreeRTOS example for the F100RB board" OFF)
 option(FREERTOS_F407VG_EXAMPLE "Compile FreeRTOS example for the F407VG board" OFF)
 option(FREERTOS_H743ZI_EXAMPLE "Compile FreeRTOS example for the H743ZI board" OFF)
 option(FREERTOS_L552ZE_EXAMPLE "Compile FreeRTOS example for the L552ZE board" OFF)
 
-if(NOT FREERTOS_F407VG_EXAMPLE AND NOT FREERTOS_H743ZI_EXAMPLE AND NOT FREERTOS_L552ZE_EXAMPLE)
+if(NOT FREERTOS_F100RB_EXAMPLE AND NOT FREERTOS_F407VG_EXAMPLE AND NOT FREERTOS_H743ZI_EXAMPLE AND NOT FREERTOS_L552ZE_EXAMPLE)
     message(FATAL_ERROR
         "Please select at least one target to compile by passing FREERTOS_<BOARD>_EXAMPLE=ON\n"
         "Supported boards: ${SUPPORTED_BOARDS}"
@@ -54,14 +54,30 @@ set(FREERTOS_NAMESPACE FreeRTOS)
 if(USE_CMSIS_RTOS)
     list(APPEND CMSIS_COMP_LIST RTOS)
 endif()
+
 if(USE_CMSIS_RTOS_V2)
     list(APPEND CMSIS_COMP_LIST RTOS_V2)
 endif()
 
+if(FREERTOS_F100RB_EXAMPLE)
+    list(APPEND CMSIS_COMP_LIST STM32F1)
+    list(APPEND HAL_COMP_LIST STM32F1)
+    list(APPEND FREERTOS_COMP_LIST ARM_CM3)
+
+    if(USE_CUBE_FREERTOS)
+        # The device family needs to be supplied as a component to use the Cube FreeRTOS sources
+        list(APPEND FREERTOS_COMP_LIST STM32F1)
+        set(FREERTOS_F1_NAMESPACE ${FREERTOS_NAMESPACE}::STM32::F1)
+    else()
+        set(FREERTOS_F1_NAMESPACE ${FREERTOS_NAMESPACE})
+    endif()
+endif()
+
 if(FREERTOS_H743ZI_EXAMPLE)
     list(APPEND CMSIS_COMP_LIST STM32H743ZI_M7)
     list(APPEND HAL_COMP_LIST STM32H7M7)
     list(APPEND FREERTOS_COMP_LIST ARM_CM7)
+
     if(USE_CUBE_FREERTOS)
         # The device family needs to be supplied as a component to use the Cube FreeRTOS sources
         list(APPEND FREERTOS_COMP_LIST STM32H7)
@@ -75,11 +91,12 @@ if(FREERTOS_F407VG_EXAMPLE)
     list(APPEND CMSIS_COMP_LIST STM32F407VG)
     list(APPEND HAL_COMP_LIST STM32F407VG)
     list(APPEND FREERTOS_COMP_LIST ARM_CM4F)
+
     if(USE_CUBE_FREERTOS)
         # The device family needs to be supplied as a component to use the Cube FreeRTOS sources
         list(APPEND FREERTOS_COMP_LIST STM32F4)
         set(FREERTOS_F4_NAMESPACE ${FREERTOS_NAMESPACE}::STM32::F4)
-     else()
+    else()
         set(FREERTOS_F4_NAMESPACE ${FREERTOS_NAMESPACE})
     endif()
 endif()
@@ -88,11 +105,12 @@ if(FREERTOS_L552ZE_EXAMPLE)
     list(APPEND CMSIS_COMP_LIST STM32L552ZE)
     list(APPEND HAL_COMP_LIST STM32L552ZE)
     list(APPEND FREERTOS_COMP_LIST ARM_CM33_NTZ)
+
     if(USE_CUBE_FREERTOS)
         # The device family needs to be supplied as a component to use the Cube FreeRTOS sources
         list(APPEND FREERTOS_COMP_LIST STM32L5)
         set(FREERTOS_L5_NAMESPACE ${FREERTOS_NAMESPACE}::STM32::L5)
-     else()
+    else()
         set(FREERTOS_L5_NAMESPACE ${FREERTOS_NAMESPACE})
     endif()
 endif()
@@ -111,6 +129,42 @@ set(INCLUDE_DIRS
     ${CMAKE_CURRENT_SOURCE_DIR}
 )
 
+if(FREERTOS_F100RB_EXAMPLE)
+    set(TARGET_NAME ${PROJ_NAME}-f100)
+    add_executable(${TARGET_NAME})
+
+    target_sources(${TARGET_NAME} PRIVATE ${PROJECT_SOURCES})
+    target_include_directories(${TARGET_NAME} PRIVATE ${INCLUDE_DIRS})
+    target_link_libraries(${TARGET_NAME} PRIVATE
+        ${FREERTOS_F1_NAMESPACE}::Timers
+        ${FREERTOS_F1_NAMESPACE}::Heap::4
+        ${FREERTOS_F1_NAMESPACE}::ARM_CM3
+        HAL::STM32::F1::RCC
+        HAL::STM32::F1::GPIO
+        HAL::STM32::F1::CORTEX
+        CMSIS::STM32::F100RB 
+        STM32::NoSys
+    )
+    if(USE_CMSIS_RTOS)
+        target_link_libraries(${TARGET_NAME} PRIVATE
+            CMSIS::STM32::F1::RTOS
+        )
+    endif()
+    if(USE_CMSIS_RTOS_V2)
+        target_link_libraries(${TARGET_NAME} PRIVATE
+            CMSIS::STM32::F100RB::RTOS_V2
+        )
+        target_compile_definitions(${TARGET_NAME} PRIVATE
+            USE_CMSIS_RTOS_V2
+            CMSIS_RTOS_V2_DEVICE_HEADER="stm32f1xx_hal.h"
+        )
+    endif()
+
+    stm32_print_size_of_target(${TARGET_NAME})
+    stm32_generate_binary_file(${TARGET_NAME})
+    stm32_generate_hex_file(${TARGET_NAME})
+endif()
+
 if(FREERTOS_H743ZI_EXAMPLE)
     set(TARGET_NAME ${PROJ_NAME}-h743zi)
     add_executable(${TARGET_NAME})
@@ -127,11 +181,13 @@ if(FREERTOS_H743ZI_EXAMPLE)
         CMSIS::STM32::H743ZI::M7
         STM32::NoSys
     )
+
     if(USE_CMSIS_RTOS)
         target_link_libraries(${TARGET_NAME} PRIVATE
             CMSIS::STM32::H7::M7::RTOS
         )
     endif()
+
     if(USE_CMSIS_RTOS_V2)
         target_link_libraries(${TARGET_NAME} PRIVATE
             CMSIS::STM32::H7::M7::RTOS_V2
@@ -160,14 +216,16 @@ if(FREERTOS_F407VG_EXAMPLE)
         HAL::STM32::F4::RCC
         HAL::STM32::F4::GPIO
         HAL::STM32::F4::CORTEX
-        CMSIS::STM32::F407VG 
+        CMSIS::STM32::F407VG
         STM32::NoSys
     )
+
     if(USE_CMSIS_RTOS)
         target_link_libraries(${TARGET_NAME} PRIVATE
             CMSIS::STM32::F4::RTOS
         )
     endif()
+
     if(USE_CMSIS_RTOS_V2)
         target_link_libraries(${TARGET_NAME} PRIVATE
             CMSIS::STM32::F4::RTOS_V2
@@ -199,11 +257,13 @@ if(FREERTOS_L552ZE_EXAMPLE)
         CMSIS::STM32::L552ZE
         STM32::NoSys
     )
+
     if(USE_CMSIS_RTOS)
         target_link_libraries(${TARGET_NAME} PRIVATE
             CMSIS::STM32::L5::RTOS
         )
     endif()
+
     if(USE_CMSIS_RTOS_V2)
         target_link_libraries(${TARGET_NAME} PRIVATE
             CMSIS::STM32::L5::RTOS_V2

examples/freertos/FreeRTOSConfig.h

@@ -44,6 +44,12 @@
 #include <stdint.h>
 extern uint32_t SystemCoreClock;
 
+#if defined STM32F1
+	// This is enough for Blinky example.
+	#define configMINIMAL_STACK_SIZE		( ( unsigned short ) 50 )
+	#define configTOTAL_HEAP_SIZE			( ( size_t ) ( 2 * 1024 ) )
+#endif
+
 #if defined STM32L5
 	#define configENABLE_TRUSTZONE                   0
 	#if configENABLE_TRUSTZONE
@@ -62,8 +68,12 @@ extern uint32_t SystemCoreClock;
 #if !defined USE_CMSIS_RTOS_V2
 #define configMAX_PRIORITIES			( 5 )
 #endif
+#if !defined configMINIMAL_STACK_SIZE
 #define configMINIMAL_STACK_SIZE		( ( unsigned short ) 130 )
+#endif
+#if !defined configTOTAL_HEAP_SIZE
 #define configTOTAL_HEAP_SIZE			( ( size_t ) ( 8 * 1024 ) )
+#endif
 #define configMAX_TASK_NAME_LEN			( 10 )
 #define configUSE_TRACE_FACILITY		1
 #define configUSE_16_BIT_TICKS			0

examples/freertos/main.cpp

@@ -3,7 +3,16 @@
 #include <task.h>
 #include <timers.h>
 
-#if defined STM32H7
+#if defined STM32F1
+    #include <stm32f1xx_hal.h>
+
+    // STM32VL-Discovery green led - PC9
+    #define LED_PORT                GPIOC
+    #define LED_PIN                 GPIO_PIN_9
+    // STM32VL-Discovery blue led - PC8
+    //#define LED_PIN                 GPIO_PIN_8
+    #define LED_PORT_CLK_ENABLE     __HAL_RCC_GPIOC_CLK_ENABLE
+#elif defined STM32H7
     #include <stm32h7xx_hal.h>
 
     // STM32H743ZI blue LED
@@ -54,7 +63,7 @@ int main(void)
     SystemInit();
     blinky::init();
     
-    xTaskCreate(blinky::blinkTask, "blinky", configMINIMAL_STACK_SIZE * 4, NULL, tskIDLE_PRIORITY + 1, NULL);
+    xTaskCreate(blinky::blinkTask, "blinky", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY + 1, NULL);
     
     vTaskStartScheduler();
     for (;;);

examples/freertos/stm32f1xx_hal_conf.h

@@ -0,0 +1,399 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f1xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CONF_H
+#define __STM32F1xx_HAL_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+// #define HAL_ADC_MODULE_ENABLED
+// #define HAL_CAN_MODULE_ENABLED
+// #define HAL_CAN_LEGACY_MODULE_ENABLED
+// #define HAL_CEC_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+// #define HAL_CRC_MODULE_ENABLED
+// #define HAL_DAC_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+// #define HAL_ETH_MODULE_ENABLED
+// #define HAL_EXTI_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+// #define HAL_HCD_MODULE_ENABLED
+// #define HAL_I2C_MODULE_ENABLED
+// #define HAL_I2S_MODULE_ENABLED
+// #define HAL_IRDA_MODULE_ENABLED
+// #define HAL_IWDG_MODULE_ENABLED
+// #define HAL_NAND_MODULE_ENABLED
+// #define HAL_NOR_MODULE_ENABLED
+// #define HAL_PCCARD_MODULE_ENABLED
+// #define HAL_PCD_MODULE_ENABLED
+// #define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+// #define HAL_RTC_MODULE_ENABLED
+// #define HAL_SD_MODULE_ENABLED
+// #define HAL_SMARTCARD_MODULE_ENABLED
+// #define HAL_SPI_MODULE_ENABLED
+// #define HAL_SRAM_MODULE_ENABLED
+// #define HAL_TIM_MODULE_ENABLED
+// #define HAL_UART_MODULE_ENABLED
+// #define HAL_USART_MODULE_ENABLED
+// #define HAL_WWDG_MODULE_ENABLED
+// #define HAL_MMC_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#if defined(USE_STM3210C_EVAL)
+#define HSE_VALUE    25000000U /*!< Value of the External oscillator in Hz */
+#else
+#define HSE_VALUE    8000000U /*!< Value of the External oscillator in Hz */
+#endif
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT    100U      /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE              8000000U  /*!< Value of the Internal oscillator in Hz */
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+#define LSI_VALUE               40000U     /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+                                                The real value may vary depending on the variations
+                                                in voltage and temperature. */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+#define LSE_VALUE               32768U    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT    5000U     /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            0x0FU /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    8U                  /* 8 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS             0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32f1xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32f1xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32f1xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32f1xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+#include "stm32f1xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+#include "stm32f1xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "Legacy/stm32f1xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+#include "stm32f1xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32f1xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32f1xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32f1xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32f1xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32f1xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+#include "stm32f1xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+#include "stm32f1xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32f1xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+#include "stm32f1xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32f1xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32f1xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32f1xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+#include "stm32f1xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+#include "stm32f1xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+#include "stm32f1xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32f1xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32f1xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32f1xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32f1xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32f1xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32f1xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32f1xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32f1xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32f1xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+#include "stm32f1xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t* file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/