FL-339: cli diagnostic interface for power subsystem. (#256)

* Core, API: add externs for c++
* Makefile: improve debug speed, flash with openocd, cleanup f2 config
* Power: add cli diagnostic.
* Local: fix api hal externs
* Local: fix externs in main and flipper_hal
* F2: power state dump stabs
* Bootloader flashing with openocd
* F3: move bq drivers to libs
* temporary do not build drivers on local
* temporary do not build drivers on f2

Co-authored-by: aanper <mail@s3f.ru>

applications/power/power.c

@@ -105,6 +105,22 @@ void power_cli_dfu(string_t args, void* context) {
     NVIC_SystemReset();
 }
 
+void power_cli_test(string_t args, void* context) {
+    string_t buffer;
+    string_init(buffer);
+    api_hal_power_dump_state(buffer);
+    cli_print(string_get_cstr(buffer));
+    string_clear(buffer);
+}
+
+void power_cli_otg_on(string_t args, void* context) {
+    api_hal_power_enable_otg();
+}
+
+void power_cli_otg_off(string_t args, void* context) {
+    api_hal_power_disable_otg();
+}
+
 void power_task(void* p) {
     (void)p;
     Power* power = power_alloc();
@@ -113,6 +129,9 @@ void power_task(void* p) {
         cli_add_command(power->cli, "poweroff", power_cli_poweroff, power);
         cli_add_command(power->cli, "reset", power_cli_reset, power);
         cli_add_command(power->cli, "dfu", power_cli_dfu, power);
+        cli_add_command(power->cli, "power_test", power_cli_test, power);
+        cli_add_command(power->cli, "power_otg_on", power_cli_otg_on, power);
+        cli_add_command(power->cli, "power_otg_off", power_cli_otg_off, power);
     }
 
     FuriRecordSubscriber* gui_record = furi_open_deprecated("gui", false, false, NULL, NULL, NULL);

bootloader/targets/f2/target.mk

@@ -5,6 +5,7 @@ FW_ADDRESS		= 0x08008000
 OS_OFFSET		= 0x00008000
 FLASH_ADDRESS	= 0x08000000
 
+DEBUG_AGENT		= openocd -f interface/stlink.cfg -c "transport select hla_swd" -f target/stm32l4x.cfg -c "init" -c "adapter speed 4000"
 BOOT_CFLAGS		= -DBOOT_ADDRESS=$(BOOT_ADDRESS) -DFW_ADDRESS=$(FW_ADDRESS) -DOS_OFFSET=$(OS_OFFSET)
 MCU_FLAGS		= -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
 

bootloader/targets/f3/target.mk

@@ -5,6 +5,7 @@ FW_ADDRESS		= 0x08008000
 OS_OFFSET		= 0x00008000
 FLASH_ADDRESS	= 0x08000000
 
+DEBUG_AGENT		= openocd -f interface/stlink.cfg -c "transport select hla_swd" -f target/stm32wbx.cfg -c "init" -c "adapter speed 4000"
 BOOT_CFLAGS		= -DBOOT_ADDRESS=$(BOOT_ADDRESS) -DFW_ADDRESS=$(FW_ADDRESS) -DOS_OFFSET=$(OS_OFFSET)
 MCU_FLAGS		= -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
 

core/app.cpp

@@ -1,8 +1,8 @@
 #include <stdio.h>
-
-extern "C" {
 #include "flipper.h"
 #include "flipper_v2.h"
+
+extern "C" {
 #include "log.h"
 #include "applications.h"
 #include "tty_uart.h"

core/flipper.h

@@ -1,23 +1,24 @@
 #pragma once
 
+#include "api-hal.h"
+
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 #include "main.h"
-#include "api-hal.h"
 #include "cmsis_os.h"
 #include "furi-deprecated.h"
 
 #include "log.h"
 #include "input/input.h"
 
-#ifdef __cplusplus
-}
-#endif
-
 #include <stdio.h>
 
 void set_exitcode(uint32_t _exitcode);
 
 #define FURI_LIB (const char*[])
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/api-hal-include/api-hal-boot.h

@@ -1,8 +1,16 @@
 #pragma once
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 typedef enum {
     ApiHalBootModeNormal,
     ApiHalBootModeDFU
 } ApiHalBootMode;
 
 void api_hal_boot_set_mode(ApiHalBootMode mode);
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/api-hal-include/api-hal-delay.h

@@ -1,6 +1,14 @@
 #pragma once
 #include "main.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 void delay(float milliseconds);
 void delay_us(float microseconds);
 void delay_us_init_DWT(void);
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/api-hal-include/api-hal-power.h

@@ -2,6 +2,11 @@
 
 #include <stdint.h>
 #include <stdbool.h>
+#include <m-string.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
 
 /* Initialize drivers */
 void api_hal_power_init();
@@ -20,3 +25,16 @@ void api_hal_power_enable_otg();
 
 /* OTG disable */
 void api_hal_power_disable_otg();
+
+/* Get battery voltage in V */
+float api_hal_power_get_battery_voltage();
+
+/* Get battery current in A */
+float api_hal_power_get_battery_current();
+
+/* Get power system component state */
+void api_hal_power_dump_state(string_t buffer);
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/api-hal-include/api-hal-uid.h

@@ -3,8 +3,16 @@
 #include <stdint.h>
 #include <stddef.h>
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Get platform UID size in bytes */
 size_t api_hal_uid_size();
 
 /* Get const pointer to UID */
 const uint8_t* api_hal_uid();
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/api-hal-include/api-hal-vcp.h

@@ -4,6 +4,10 @@
 #include <stdint.h>
 #include <string.h>
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Init VCP HAL
  * Allocates ring buffer and initializes state
  */
@@ -22,3 +26,7 @@ size_t api_hal_vcp_rx(uint8_t* buffer, size_t size);
  * @param size - buffer size
  */
 void api_hal_vcp_tx(uint8_t* buffer, size_t size);
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/api-hal-include/api-hal.h

@@ -1,5 +1,9 @@
 #pragma once
 
+#ifdef __cplusplus
+template <unsigned int N> struct STOP_EXTERNING_ME {};
+#endif
+
 #include "api-hal-boot.h"
 #include "api-hal-gpio.h"
 #include "api-hal-delay.h"

firmware/targets/f2/api-hal/api-hal-gpio.h

@@ -2,6 +2,10 @@
 #include "main.h"
 #include "stdbool.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 // this defined in xx_hal_gpio.c, so...
 #define GPIO_NUMBER (16U)
 
@@ -67,3 +71,7 @@ static inline bool hal_gpio_read(const GpioPin* gpio) {
 bool hal_gpio_read_sd_detect(void);
 
 void enable_cc1101_irq();
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/f2/api-hal/api-hal-power.c

@@ -1,20 +1,20 @@
 #include <api-hal-power.h>
 #include <adc.h>
+#include <math.h>
 
-#define BATTERY_MIN_VOLTAGE 3.2f
-#define BATTERY_MAX_VOLTAGE 4.0f
+#define BATTERY_MIN_VOLTAGE 3.4f
+#define BATTERY_MAX_VOLTAGE 4.1f
 
 void api_hal_power_init() {}
 
 uint8_t api_hal_power_get_pct() {
-    float value;
-    HAL_ADC_Start(&hadc1);
-    if(HAL_ADC_PollForConversion(&hadc1, 1000) != HAL_TIMEOUT) {
-        value = HAL_ADC_GetValue(&hadc1);
+    float value = api_hal_power_get_battery_voltage();
+
+    if (value == NAN || value < BATTERY_MIN_VOLTAGE) {
+        return 0;
     }
 
-    value = ((float)value / 10 * 2 - BATTERY_MIN_VOLTAGE) /
-                       (BATTERY_MAX_VOLTAGE - BATTERY_MIN_VOLTAGE);
+    value = (value - BATTERY_MIN_VOLTAGE) / (BATTERY_MAX_VOLTAGE - BATTERY_MIN_VOLTAGE) * 100;
 
     if(value > 100) {
         value = 100;
@@ -32,3 +32,33 @@ void api_hal_power_off() {}
 void api_hal_power_enable_otg() {}
 
 void api_hal_power_disable_otg() {}
+
+float api_hal_power_get_battery_voltage() {
+    ADC_ChannelConfTypeDef sConfig = {0};
+    sConfig.Channel = ADC_CHANNEL_4;
+    sConfig.Rank = ADC_REGULAR_RANK_1;
+    sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
+    sConfig.SingleDiff = ADC_SINGLE_ENDED;
+    sConfig.OffsetNumber = ADC_OFFSET_NONE;
+    sConfig.Offset = 0;
+    if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK) {
+        Error_Handler();
+    }
+
+    float value = NAN;
+    HAL_ADC_Start(&hadc1);
+    if(HAL_ADC_PollForConversion(&hadc1, 1000) != HAL_TIMEOUT) {
+        // adc range / 12 bits * adc_value * divider ratio * sampling drag correction
+        value = 3.3f / 4096.0f * HAL_ADC_GetValue(&hadc1) * 2 * 1.3;
+    }
+
+    return value;
+}
+
+float api_hal_power_get_battery_current() {
+    return NAN;
+}
+
+void api_hal_power_dump_state(string_t buffer) {
+    string_cat_printf(buffer, "Not supported");
+}

firmware/targets/f2/target.mk

@@ -1,6 +1,6 @@
 TOOLCHAIN = arm
 
-DEBUG_AGENT		= openocd -f interface/stlink-v2.cfg -c "transport select hla_swd" -f target/stm32l4x.cfg -c "init"
+DEBUG_AGENT		= openocd -f interface/stlink.cfg -c "transport select hla_swd" -f target/stm32l4x.cfg -c "init" -c "adapter speed 4000"
 
 BOOT_ADDRESS	= 0x08000000
 FW_ADDRESS		= 0x08008000

firmware/targets/f3/Inc/bq25896.h

@@ -1,18 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-
-/* Initialize Driver */
-void bq25896_init();
-
-/* Send device into shipping mode */
-void bq25896_poweroff();
-
-/* Is currently charging */
-bool bq25896_is_charging();
-
-/* Enable otg */
-void bq25896_enable_otg();
-
-/* Disable otg */
-void bq25896_disable_otg();

firmware/targets/f3/Inc/bq27220.h

@@ -1,21 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-
-/* Initialize Driver */
-void bq27220_init();
-
-/* Get battery voltage in mV */
-uint16_t bq27220_get_voltage();
-
-/* Get current in mA */
-int16_t bq27220_get_current();
-
-/* Get compensated full charge capacity in in mAh */
-uint16_t bq27220_get_full_charge_capacity();
-
-/* Get remaining capacity in in mAh */
-uint16_t bq27220_get_remaining_capacity();
-
-/* Get predicted remaining battery capacity in percents */
-uint16_t bq27220_get_state_of_charge();

firmware/targets/f3/api-hal/api-hal-gpio.h

@@ -2,6 +2,10 @@
 #include "main.h"
 #include "stdbool.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 // this defined in xx_hal_gpio.c, so...
 #define GPIO_NUMBER (16U)
 
@@ -67,3 +71,7 @@ static inline bool hal_gpio_read(const GpioPin* gpio) {
 bool hal_gpio_read_sd_detect(void);
 
 void enable_cc1101_irq();
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/f3/api-hal/api-hal-power.c

@@ -26,3 +26,58 @@ void api_hal_power_enable_otg() {
 void api_hal_power_disable_otg() {
     bq25896_disable_otg();
 }
+
+float api_hal_power_get_battery_voltage() {
+    return (float)bq27220_get_voltage() / 1000.0f;
+}
+
+float api_hal_power_get_battery_current() {
+    return (float)bq27220_get_current() / 1000.0f;
+}
+
+void api_hal_power_dump_state(string_t buffer) {
+    BatteryStatus battery_status;
+    OperationStatus operation_status;
+    if (bq27220_get_battery_status(&battery_status) == BQ27220_ERROR
+        || bq27220_get_operation_status(&operation_status) == BQ27220_ERROR) {
+        string_cat_printf(buffer, "Failed to get bq27220 status. Communication error.\r\n");
+    } else {
+        string_cat_printf(buffer,
+           "bq27220: CALMD: %d, SEC0: %d, SEC1: %d, EDV2: %d, VDQ: %d, INITCOMP: %d, SMTH: %d, BTPINT: %d, CFGUPDATE: %d\r\n",
+            operation_status.CALMD, operation_status.SEC0, operation_status.SEC1,
+            operation_status.EDV2, operation_status.VDQ, operation_status.INITCOMP,
+            operation_status.SMTH, operation_status.BTPINT, operation_status.CFGUPDATE
+        );
+        // Battery status register, part 1
+        string_cat_printf(buffer,
+           "bq27220: CHGINH: %d, FC: %d, OTD: %d, OTC: %d, SLEEP: %d, OCVFAIL: %d, OCVCOMP: %d, FD: %d\r\n",
+            battery_status.CHGINH, battery_status.FC, battery_status.OTD,
+            battery_status.OTC, battery_status.SLEEP, battery_status.OCVFAIL,
+            battery_status.OCVCOMP, battery_status.FD
+        );
+        // Battery status register, part 2
+        string_cat_printf(buffer,
+           "bq27220: DSG: %d, SYSDWN: %d, TDA: %d, BATTPRES: %d, AUTH_GD: %d, OCVGD: %d, TCA: %d, RSVD: %d\r\n",
+            battery_status.DSG, battery_status.SYSDWN, battery_status.TDA,
+            battery_status.BATTPRES, battery_status.AUTH_GD, battery_status.OCVGD,
+            battery_status.TCA, battery_status.RSVD
+        );
+        // Voltage and current info
+        string_cat_printf(buffer,
+            "bq27220: Full capacity: %dmAh, Remaining capacity: %dmAh, State of Charge: %d%%\r\n",
+            bq27220_get_full_charge_capacity(), bq27220_get_remaining_capacity(),
+            bq27220_get_state_of_charge()
+        );
+        string_cat_printf(buffer,
+            "bq27220: Voltage: %dmV, Current: %dmA, Temperature: %dC\r\n",
+            bq27220_get_voltage(), bq27220_get_current(), (bq27220_get_temperature() - 2731)/10
+        );
+    }
+
+    string_cat_printf(buffer,
+        "bq25896: VBUS: %d, VSYS: %d, VBAT: %d, Current: %d, NTC: %dm%%\r\n",
+        bq25896_get_vbus_voltage(), bq25896_get_vsys_voltage(),
+        bq25896_get_vbat_voltage(), bq25896_get_vbat_current(),
+        bq25896_get_ntc_mpct()
+    );
+}

firmware/targets/f3/target.mk

@@ -1,6 +1,6 @@
 TOOLCHAIN = arm
 
-DEBUG_AGENT		= openocd -f interface/stlink.cfg -c "transport select hla_swd" -f target/stm32wbx.cfg -c "init"
+DEBUG_AGENT		= openocd -f interface/stlink.cfg -c "transport select hla_swd" -f target/stm32wbx.cfg -c "init" -c "adapter speed 4000"
 
 BOOT_ADDRESS	= 0x08000000
 FW_ADDRESS		= 0x08008000

firmware/targets/local/Inc/flipper_hal.h

@@ -10,6 +10,10 @@ GPIO and HAL implementations
 #include <stdbool.h>
 #include "main.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 #define GPIOA "PA"
 #define GPIOB "PB"
 #define GPIOC "PC"
@@ -50,4 +54,8 @@ typedef const char* SPI_HandleTypeDef;
 typedef uint32_t HAL_StatusTypeDef;
 
 HAL_StatusTypeDef
-HAL_SPI_Transmit(SPI_HandleTypeDef* hspi, uint8_t* pData, uint16_t Size, uint32_t Timeout);
+HAL_SPI_Transmit(SPI_HandleTypeDef* hspi, uint8_t* pData, uint16_t Size, uint32_t Timeout);
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/local/Inc/main.h

@@ -2,6 +2,10 @@
 #include <stdlib.h>
 #include <limits.h>
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 #define HAL_MAX_DELAY INT_MAX
 
 typedef uint32_t UART_HandleTypeDef;
@@ -16,3 +20,7 @@ typedef uint32_t TIM_HandleTypeDef;
 #define LED_GREEN_GPIO_Port "Green:"
 #define LED_BLUE_Pin 1
 #define LED_BLUE_GPIO_Port "Blue:"
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/local/api-hal/api-hal-gpio.h

@@ -2,6 +2,10 @@
 #include "main.h"
 #include "stdbool.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 // hw-api
 
 typedef char GPIO_TypeDef;
@@ -53,3 +57,7 @@ void hal_gpio_write(const GpioPin* gpio, const bool state);
 bool hal_gpio_read(const GpioPin* gpio);
 
 void enable_cc1101_irq();
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/local/api-hal/api-hal-task.h

@@ -3,6 +3,10 @@
 #include <cmsis_os.h>
 #include <stdbool.h>
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 // Task stack size in bytes
 #define DEFAULT_STACK_SIZE 4096
 
@@ -12,3 +16,7 @@
 bool task_equal(TaskHandle_t a, TaskHandle_t b);
 bool task_is_isr_context(void);
 __attribute__((unused)) void taskDISABLE_INTERRUPTS(void);
+
+#ifdef __cplusplus
+}
+#endif

firmware/targets/f3/Src/bq25896.c → lib/drivers/bq25896.c

@@ -69,9 +69,6 @@ void bq25896_init() {
     bq25896_regs.r14.REG_RST = 1;
     bq25896_write_reg(0x14, (uint8_t*)&bq25896_regs.r14);
 
-    // bq25896_regs.r07.WATCHDOG = 0b00;
-    // bq25896_write_reg(0x07, (uint8_t*)&bq25896_regs.r07);
-
     bq25896_read(0x00, (uint8_t*)&bq25896_regs, sizeof(bq25896_regs));
 }
 
@@ -81,19 +78,58 @@ void bq25896_poweroff() {
 }
 
 bool bq25896_is_charging() {
-    bq25896_regs.r03.WD_RST = 1;
-    bq25896_write_reg(0x03, (uint8_t*)&bq25896_regs.r03);
-
     bq25896_read_reg(0x0B, (uint8_t*)&bq25896_regs.r0B);
     return bq25896_regs.r0B.CHRG_STAT != ChrgStatNo;
 }
 
 void bq25896_enable_otg() {
     bq25896_regs.r03.OTG_CONFIG = 1;
-    bq25896_write_reg(0x09, (uint8_t*)&bq25896_regs.r03);
+    bq25896_write_reg(0x03, (uint8_t*)&bq25896_regs.r03);
 }
 
 void bq25896_disable_otg() {
     bq25896_regs.r03.OTG_CONFIG = 0;
-    bq25896_write_reg(0x09, (uint8_t*)&bq25896_regs.r03);
+    bq25896_write_reg(0x03, (uint8_t*)&bq25896_regs.r03);
+}
+
+void bq25896_adc_sample() {
+    bq25896_regs.r02.CONV_START = 1;
+    bq25896_write_reg(0x02, (uint8_t*)&bq25896_regs.r02);
+    while(bq25896_regs.r02.CONV_START == 1) {
+        bq25896_read_reg(0x02, (uint8_t*)&bq25896_regs.r02);
+    }
+}
+
+uint16_t bq25896_get_vbus_voltage() {
+    bq25896_adc_sample();
+    bq25896_read_reg(0x11, (uint8_t*)&bq25896_regs.r11);
+    if (bq25896_regs.r11.VBUS_GD) {
+        return (uint16_t)bq25896_regs.r11.VBUSV * 100 + 2600;
+    } else {
+        return 0;
+    }
+}
+
+uint16_t bq25896_get_vsys_voltage() {
+    bq25896_adc_sample();
+    bq25896_read_reg(0x0F, (uint8_t*)&bq25896_regs.r0F);
+    return (uint16_t)bq25896_regs.r0F.SYSV * 20 + 2304;
+}
+
+uint16_t bq25896_get_vbat_voltage() {
+    bq25896_adc_sample();
+    bq25896_read_reg(0x0E, (uint8_t*)&bq25896_regs.r0E);
+    return (uint16_t)bq25896_regs.r0E.BATV * 20 + 2304;
+}
+
+uint16_t bq25896_get_vbat_current() {
+    bq25896_adc_sample();
+    bq25896_read_reg(0x12, (uint8_t*)&bq25896_regs.r12);
+    return (uint16_t)bq25896_regs.r12.ICHGR * 50;
+}
+
+uint32_t bq25896_get_ntc_mpct() {
+    bq25896_adc_sample();
+    bq25896_read_reg(0x10, (uint8_t*)&bq25896_regs.r10);
+    return (uint32_t)bq25896_regs.r10.TSPCT * 465+21000;
 }

lib/drivers/bq25896.h

@@ -0,0 +1,34 @@
+#pragma once
+
+#include <stdbool.h>
+#include <stdint.h>
+
+/* Initialize Driver */
+void bq25896_init();
+
+/* Send device into shipping mode */
+void bq25896_poweroff();
+
+/* Is currently charging */
+bool bq25896_is_charging();
+
+/* Enable otg */
+void bq25896_enable_otg();
+
+/* Disable otg */
+void bq25896_disable_otg();
+
+/* Get VBUS Voltage in mV */
+uint16_t bq25896_get_vbus_voltage();
+
+/* Get VSYS Voltage in mV */
+uint16_t bq25896_get_vsys_voltage();
+
+/* Get VBAT Voltage in mV */
+uint16_t bq25896_get_vbat_voltage();
+
+/* Get VBAT current in mA */
+uint16_t bq25896_get_vbat_current();
+
+/* Get NTC voltage in mpct of REGN */
+uint32_t bq25896_get_ntc_mpct();

firmware/targets/f3/Src/bq27220.c → lib/drivers/bq27220.c

@@ -6,17 +6,18 @@
 uint16_t bq27220_read_word(uint8_t address) {
     uint8_t data[2] = { address };
     if (HAL_I2C_Master_Transmit(&POWER_I2C, BQ27220_ADDRESS, data, 1, 2000) != HAL_OK) {
-        return 0;
+        return BQ27220_ERROR;
     }
 
     if (HAL_I2C_Master_Receive(&POWER_I2C, BQ27220_ADDRESS, data, 2, 2000) != HAL_OK) {
-        return 0;
+        return BQ27220_ERROR;
     }
     return *(uint16_t*)data;
 }
 
 bool bq27220_control(uint16_t control) {
-    uint8_t data[3] = { CommandControl };
+    uint8_t data[3];
+    data[0] = CommandControl;
     data[1] = (control>>8) & 0xFF;
     data[2] = control & 0xFF;
     if (HAL_I2C_Master_Transmit(&POWER_I2C, BQ27220_ADDRESS, data, 3, 2000) != HAL_OK) {
@@ -37,7 +38,31 @@ uint16_t bq27220_get_voltage() {
 }
 
 int16_t bq27220_get_current() {
-    return (int16_t)bq27220_read_word(CommandCurrent);
+    return bq27220_read_word(CommandCurrent);
+}
+
+uint8_t bq27220_get_battery_status(BatteryStatus* battery_status) {
+    uint16_t data = bq27220_read_word(CommandBatteryStatus);
+    if (data == BQ27220_ERROR) {
+        return BQ27220_ERROR;
+    } else {
+        *(uint16_t*)battery_status = data;
+        return BQ27220_SUCCESS;
+    }
+}
+
+uint8_t bq27220_get_operation_status(OperationStatus* operation_status) {
+    uint16_t data = bq27220_read_word(CommandOperationStatus);
+    if (data == BQ27220_ERROR) {
+        return BQ27220_ERROR;
+    } else {
+        *(uint16_t*)operation_status = data;
+        return BQ27220_SUCCESS;
+    }
+}
+
+uint16_t bq27220_get_temperature() {
+    return bq27220_read_word(CommandTemperature);
 }
 
 uint16_t bq27220_get_full_charge_capacity() {

lib/drivers/bq27220.h

@@ -0,0 +1,71 @@
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#define BQ27220_ERROR 0x0
+#define BQ27220_SUCCESS 0x1
+
+typedef struct {
+    // Low byte, Low bit first
+    bool DSG:1;         // The device is in DISCHARGE
+    bool SYSDWN:1;      // System down bit indicating the system should shut down
+    bool TDA:1;         // Terminate Discharge Alarm
+    bool BATTPRES:1;    // Battery Present detected
+    bool AUTH_GD:1;     // Detect inserted battery
+    bool OCVGD:1;       // Good OCV measurement taken
+    bool TCA:1;         // Terminate Charge Alarm
+    bool RSVD:1;        // Reserved
+    // High byte, Low bit first
+    bool CHGINH:1;      // Charge inhibit
+    bool FC:1;          // Full-charged is detected
+    bool OTD:1;         // Overtemperature in discharge condition is detected
+    bool OTC:1;         // Overtemperature in charge condition is detected
+    bool SLEEP:1;       // Device is operating in SLEEP mode when set
+    bool OCVFAIL:1;     // Status bit indicating that the OCV reading failed due to current
+    bool OCVCOMP:1;     // An OCV measurement update is complete
+    bool FD:1;          // Full-discharge is detected
+} BatteryStatus;
+
+typedef struct {
+    // Low byte, Low bit first
+    bool CALMD:1;
+    bool SEC0:1;
+    bool SEC1:1;
+    bool EDV2:1;
+    bool VDQ:1;
+    bool INITCOMP:1;
+    bool SMTH:1;
+    bool BTPINT:1;
+    // High byte, Low bit first
+    uint8_t RSVD1:2;
+    bool CFGUPDATE:1;
+    uint8_t RSVD0:5;
+} OperationStatus;
+
+/* Initialize Driver */
+void bq27220_init();
+
+/* Get battery voltage in mV or error */
+uint16_t bq27220_get_voltage();
+
+/* Get current in mA or error*/
+int16_t bq27220_get_current();
+
+/* Get battery status */
+uint8_t bq27220_get_battery_status(BatteryStatus* battery_status);
+
+/* Get operation status */
+uint8_t bq27220_get_operation_status(OperationStatus* operation_status);
+
+/* Get temperature in units of 0.1°K */
+uint16_t bq27220_get_temperature();
+
+/* Get compensated full charge capacity in in mAh */
+uint16_t bq27220_get_full_charge_capacity();
+
+/* Get remaining capacity in in mAh */
+uint16_t bq27220_get_remaining_capacity();
+
+/* Get predicted remaining battery capacity in percents */
+uint16_t bq27220_get_state_of_charge();

lib/lib.mk

@@ -68,4 +68,12 @@ CPP_SOURCES		+= $(wildcard $(ONEWIRE_DIR)/*.cpp)
 CYFRAL_DIR		= $(LIB_DIR)/cyfral
 CFLAGS			+= -I$(CYFRAL_DIR)
 CPP_SOURCES		+= $(wildcard $(CYFRAL_DIR)/*.cpp)
-endif
+endif
+
+# drivers
+ifneq ($(TARGET), local)
+ifneq ($(TARGET), f2)
+CFLAGS			+= -I$(LIB_DIR)/drivers
+C_SOURCES		+= $(wildcard $(LIB_DIR)/drivers/*.c)
+endif
+endif

make/rules.mk

@@ -55,7 +55,7 @@ $(OBJ_DIR)/%.o: %.cpp $(OBJ_DIR)/BUILD_FLAGS $(ASSETS)
 	@$(CPP) $(CFLAGS) $(CPPFLAGS) -c $< -o $@
 
 $(OBJ_DIR)/flash: $(OBJ_DIR)/$(PROJECT).bin
-	st-flash --reset write $(OBJ_DIR)/$(PROJECT).bin $(FLASH_ADDRESS)
+	$(DEBUG_AGENT) -c "program $(OBJ_DIR)/$(PROJECT).bin reset exit $(FLASH_ADDRESS)" 
 	touch $@
 
 $(OBJ_DIR)/upload: $(OBJ_DIR)/$(PROJECT).bin
@@ -78,9 +78,10 @@ debug: flash
 		-ex "source ../debug/FreeRTOS/FreeRTOS.py" \
 		-ex "source ../debug/PyCortexMDebug/scripts/gdb.py" \
 		-ex "svd_load $(SVD_FILE)" \
+		-ex "compare-sections" \
 		$(OBJ_DIR)/$(PROJECT).elf; \
-	kill `cat $(OBJ_DIR)/agent.PID`; \
-	rm $(OBJ_DIR)/agent.PID
+	echo "reset; shutdown;" | nc 127.0.0.1 4444 > /dev/null
+	kill `cat $(OBJ_DIR)/agent.PID`; rm $(OBJ_DIR)/agent.PID > /dev/null
 
 bm_debug: flash
 	set -m; blackmagic & echo $$! > $(OBJ_DIR)/agent.PID