|
|
@@ -51,7 +51,29 @@ You can check out the marauder article written [here](https://www.hackster.io/ne
|
|
|
This project requires the following hardware in order to work:
|
|
|
- Any ESP32 Development Board
|
|
|
- 2.8" TFT Touch Screen w/ ili9341
|
|
|
-
|
|
|
+- Jumper Wires
|
|
|
+- Breadboard
|
|
|
+
|
|
|
+### Connections
|
|
|
+Make the following connections between your 2.8" TFT Screen and your ESP32 board. You may need to refer to a pinout sheet specific to the ESP32 dev board you have chosen. For more infomation about this circuit, please refer to [this schematic](https://github.com/justcallmekoko/ESP32Marauder/blob/master/schematics/Schematic_ESP32-Marauder-2_ESP32-Marauder-2-Schematic_20191007113616_png.png)
|
|
|
+
|
|
|
+| 2.8" TFT | ESP32 |
|
|
|
+| -------- | ------ |
|
|
|
+| VCC | VCC |
|
|
|
+| GND | GND |
|
|
|
+| CS | GPIO17 |
|
|
|
+| RESET | GPIO5 |
|
|
|
+| D/C | GPIO16 |
|
|
|
+| MOSI | GPIO23 |
|
|
|
+| SCK | GPIO18 |
|
|
|
+| LED | GPIO32 |
|
|
|
+| MISO | GPIO19 |
|
|
|
+| T_CLK | GPIO18 |
|
|
|
+| T_CS | GPIO21 |
|
|
|
+| T_DI | GPIO23 |
|
|
|
+| T_DO | GPIO19 |
|
|
|
+| T_IRQ | N/C |
|
|
|
+
|
|
|
## Flashing Firmware
|
|
|
### Using Arduino IDE
|
|
|
1. Install the [Arduino IDE](https://www.arduino.cc/en/main/software)
|
Just Call Me Koko