Explorar o código

Support for custom CC1101 presets.

antirez %!s(int64=3) %!d(string=hai) anos
pai
achega
1d8ca65a61
Modificáronse 3 ficheiros con 64 adicións e 8 borrados
  1. 1 0
      app.h
  2. 17 8
      app_subghz.c
  3. 46 0
      custom_presets.h

+ 1 - 0
app.h

@@ -49,6 +49,7 @@ typedef enum {
 typedef struct {
     const char *name;
     FuriHalSubGhzPreset preset;
+    uint8_t *custom;
 } ProtoViewModulation;
 
 extern ProtoViewModulation ProtoViewModulations[]; /* In app_subghz.c */

+ 17 - 8
app_subghz.c

@@ -2,17 +2,19 @@
  * See the LICENSE file for information about the license. */
 
 #include "app.h"
+#include "custom_presets.h"
 
 #include <flipper_format/flipper_format_i.h>
 
 ProtoViewModulation ProtoViewModulations[] = {
-    {"OOK 650Khz", FuriHalSubGhzPresetOok650Async},
-    {"OOK 270Khz", FuriHalSubGhzPresetOok270Async},
-    {"2FSK 2.38Khz", FuriHalSubGhzPreset2FSKDev238Async},
-    {"2FSK 47.6Khz", FuriHalSubGhzPreset2FSKDev476Async},
-    {"MSK", FuriHalSubGhzPresetMSK99_97KbAsync},
-    {"GFSK", FuriHalSubGhzPresetGFSK9_99KbAsync},
-    {NULL, 0} /* End of list sentinel. */
+    {"OOK 650Khz", FuriHalSubGhzPresetOok650Async, NULL},
+    {"OOK 270Khz", FuriHalSubGhzPresetOok270Async, NULL},
+    {"2FSK 2.38Khz", FuriHalSubGhzPreset2FSKDev238Async, NULL},
+    {"2FSK 47.6Khz", FuriHalSubGhzPreset2FSKDev476Async, NULL},
+    {"MSK", FuriHalSubGhzPresetMSK99_97KbAsync, NULL},
+    {"GFSK", FuriHalSubGhzPresetGFSK9_99KbAsync, NULL},
+    {"FSK for TPMS", 0, (uint8_t*)protoview_subghz_tpms_async_regs},
+    {NULL, 0, NULL} /* End of list sentinel. */
 };
 
 /* Called after the application initialization in order to setup the
@@ -23,7 +25,14 @@ void radio_begin(ProtoViewApp* app) {
     furi_assert(app);
     furi_hal_subghz_reset();
     furi_hal_subghz_idle();
-    furi_hal_subghz_load_preset(ProtoViewModulations[app->modulation].preset);
+
+    /* The CC1101 preset can be either one of the standard presets, if
+     * the modulation "custom" field is NULL, or a custom preset we
+     * defined in custom_presets.h. */
+    if (ProtoViewModulations[app->modulation].custom == NULL)
+        furi_hal_subghz_load_preset(ProtoViewModulations[app->modulation].preset);
+    else
+        furi_hal_subghz_load_custom_preset(ProtoViewModulations[app->modulation].custom);
     furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
     app->txrx->txrx_state = TxRxStateIDLE;
 }

+ 46 - 0
custom_presets.h

@@ -0,0 +1,46 @@
+#include <cc1101.h>
+
+static uint8_t protoview_subghz_tpms_async_regs[][2] = {
+    /* GPIO GD0 */
+    {CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
+
+    /* Frequency Synthesizer Control */
+    {CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
+
+    /* Packet engine */
+    {CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
+    {CC1101_PKTCTRL1, 0x04},
+
+    // // Modem Configuration
+    {CC1101_MDMCFG0, 0x00},
+    {CC1101_MDMCFG1, 0x02},
+    {CC1101_MDMCFG2, 0x04}, // Format 2-FSK/FM, No preamble/sync, Disable (current optimized)
+    {CC1101_MDMCFG3, 0x93}, // Data rate is 20kBaud
+    {CC1101_MDMCFG4, 0x59}, // Rx bandwidth filter is 325 kHz
+    {CC1101_DEVIATN, 0x41}, // Deviation 28.56 kHz
+
+    /* Main Radio Control State Machine */
+    {CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
+
+    /* Frequency Offset Compensation Configuration */
+    {CC1101_FOCCFG,
+     0x16}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
+
+    /* Automatic Gain Control */
+    {CC1101_AGCCTRL0,
+     0x91}, //10 - Medium hysteresis, medium asymmetric dead zone, medium gain ; 01 - 16 samples agc; 00 - Normal AGC, 01 - 8dB boundary
+    {CC1101_AGCCTRL1,
+     0x00}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
+    {CC1101_AGCCTRL2, 0x07}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 111 - MAIN_TARGET 42 dB
+
+    /* Wake on radio and timeouts control */
+    {CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
+
+    /* Frontend configuration */
+    {CC1101_FREND0, 0x10}, // Adjusts current TX LO buffer
+    {CC1101_FREND1, 0x56},
+
+    /* End  */
+    {0, 0},
+};
+