Updated wiki pages to use lfs objects (#58)

- Added stm32f4 hal and ll drivers pdf
- Removed all the lfs objects to the old wiki
- Removed lfs gitattribute garbage

Signed-off-by: Henry Pauli <henry@mixict.nl>

Co-authored-by: Henry Paulissen <henry@mixict.nl>

README.md

@@ -1,6 +1,6 @@
 # Flipper Zero Firmware community repo
 
-![](https://github.com/Flipper-Zero/wiki/blob/master/images/firmware-wiki-header.gif)
+![](https://github.com/Flipper-Zero/flipperzero-firmware-community/raw/master/wiki_static/firmware-wiki-header.gif)
 
 Welcome to [Flipper Zero](https://flipperzero.one/zero)'s Firmware repo! Our goal is to create nice and clean code along with good documentation, to make it a pleasure for everyone to work with. This repo will become completely public closer to the device shipping date. 
 

wiki/applications/Sub-1-GHz-radio.md

@@ -9,7 +9,7 @@ CC1101 is well known universal transceiver designed for low-power wireless appli
 
 User should be able to detect which frequency used in specific device. For example detect if unknown remote transmit on 433MHz or 868MHz
 
-![frequency scan example](https://github.com/Flipper-Zero/wiki/raw/master/images/rf_scan.png)
+![frequency scan example](https://github.com/Flipper-Zero/flipperzero-firmware-community/raw/master/wiki_static/rf_scan.png)
 
 ## Signal Analyzer
 
@@ -46,4 +46,4 @@ For this flipper should have library of popular remotes brands.
 ## Main menu
 
 * Sniffer
-* Saved
+* Saved

wiki/applications/iButton-contact-keys.md

@@ -3,7 +3,7 @@ Flipper Zero has a built-in 1-Wire pad to read iButton (DS1990A) keys, also know
 * **Reading & Writing & Emulating**
 * **Protocol detection**: юзер может определить тип ключа поднося ключ к флипперу и тип считывателя поднося флиппер к домофону (цифрал, даллас и т.д.)
 
-<img width="300" src="https://github.com/Flipper-Zero/wiki/raw/master/images/ibutton/P1020756.jpg" />
+<img width="300" src="https://github.com/Flipper-Zero/flipperzero-firmware-community/raw/master/wiki_static/ibutton/P1020756.jpg" />
 
 ## Reading
 `iButton(1-Wire) -> Reading`
@@ -11,7 +11,7 @@ Flipper Zero has a built-in 1-Wire pad to read iButton (DS1990A) keys, also know
 Flipper will wait for iButton tag.  While waiting red LED is blinking.  
 Lean tag on iButton reader in the back side of Flipper Zero:
 
-<img width="300" src="https://github.com/Flipper-Zero/wiki/raw/master/images/ibutton/read1.jpeg" />
+<img width="300" src="https://github.com/Flipper-Zero/flipperzero-firmware-community/raw/master/wiki_static/ibutton/read1.jpeg" />
 
 # UI
 
@@ -19,4 +19,4 @@ Lean tag on iButton reader in the back side of Flipper Zero:
 
 * Read
 * Saved Keys
-* Enter manually
+* Enter manually

wiki/fw/FURI.md

@@ -61,7 +61,7 @@ unlock value mutex works as `furi_wrte` but unlock global mutex.
 # Usage example
 _Diagram below describes furi states_
 
-![FURI states](https://github.com/Flipper-Zero/wiki/raw/master/images/furi_states.png)
+![FURI states](https://github.com/Flipper-Zero/flipperzero-firmware-community/blob/master/wiki_static/furi_states.png)
 
 * After start, init code run some applications: in this example there is status bar, a background task and Home screen
 * Status bar open access to framebuffer by opening "/ui/fb" FURI record

wiki/fw/Firmware.md

@@ -1,6 +1,6 @@
 _Overview of Flipper firmware architecture:_
 
-![FW arch](https://github.com/Flipper-Zero/wiki/raw/master/images/flipper_fw_arch.png)
+![FW arch](https://github.com/Flipper-Zero/flipperzero-firmware-community/raw/master/wiki_static/flipper_fw_arch.png)
 
 # Project structure
 
@@ -34,7 +34,7 @@ _Overview of Flipper firmware architecture:_
 
 # HAL
 
-We use STM32 HAL/LL. Description available here: [dm00105879.pdf](https://github.com/Flipper-Zero/wiki/raw/master/dm00105879-description-of-stm32f4-hal-and-ll-drivers-stmicroelectronics.pdf)
+We use STM32 HAL/LL. Description available here: [dm00105879.pdf](https://github.com/Flipper-Zero/flipperzero-firmware-community/raw/master/wiki_static/dm00105879-description-of-stm32f4-hal-and-ll-drivers-stmicroelectronics.pdf)
 
 ## Flipper HAL
 
@@ -152,4 +152,4 @@ You can run firmware locally (with HAL stub).
 ## Build in IDE
 
 * Arduino IDE (in progress)
-* PlatformIO (in progress)
+* PlatformIO (in progress)

wiki/hw/Hardware-version-F1B1C0.0.md

@@ -17,4 +17,4 @@
 
 after many experiments we found good schematic solution for work with RFID and auxiliary follow iButton level (for non-TTL protocol like Cyphral)
 
-![new RFID + iButton schematic](https://github.com/Flipper-Zero/wiki/raw/master/images/new-rfid-ibutton-sch.png)
+![new RFID + iButton schematic](https://github.com/Flipper-Zero/flipperzero-firmware-community/raw/master/wiki_static/new-rfid-ibutton-sch.png)

wiki_static/dm00105879-description-of-stm32f4-hal-and-ll-drivers-stmicroelectronics.pdf

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:5a2f94c209ba82437a15972e329a1362586cfb51f77f1189c3cd9aed47204702
+size 8740004